1. ആമുഖം
This user manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your POOLEX Silverline 90 Pool Heat Pump, model PC-SLP090. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the unit.
2 സുരക്ഷാ വിവരങ്ങൾ
Always adhere to local electrical codes and regulations. Installation must be performed by a qualified professional. Failure to follow these instructions may result in property damage, serious injury, or death.
- Ensure the power supply is disconnected before any maintenance or service.
- Do not operate the heat pump if any part is damaged or missing.
- പ്രവർത്തന സമയത്ത് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും യൂണിറ്റിൽ നിന്ന് അകറ്റി നിർത്തുക.
- Proper grounding is essential to prevent electrical shock.
- വായു ഉപഭോഗം അല്ലെങ്കിൽ എക്സ്ഹോസ്റ്റ് വെന്റുകൾ തടയരുത്.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview ഘടകങ്ങളും
The POOLEX Silverline 90 is a high-performance heat pump designed for heating swimming pools. It features a Mitsubishi compressor and a double-spiral titanium exchanger for efficient heat transfer.
ചിത്രം 3.1: മുൻഭാഗം view of the POOLEX Silverline 90 heat pump, showing the main unit with the POOLEX Silverline logo and various indicators. This image illustrates the compact design and primary external features of the heat pump.
Figure 3.2: The POOLEX Silverline 90 heat pump, highlighting its compatibility with pools up to 45m³ and the integrated Touch & Go control system. This image emphasizes the user-friendly interface and capacity suitability.
Figure 3.3: Key features of the POOLEX Silverline 90 heat pump, including 6 capacities up to 85m³, titanium exchanger, power range of 5.5 to 18 kW, and anti-corrosion properties. This graphic summarizes the technical advantages of the unit.
Figure 3.4: Accessories included with the POOLEX Silverline 90 heat pump: maintenance cover, anti-vibration support kit, 10-meter extension cable, condensate drainage hose, and 50mm PVC connectors. This image details the complete package for installation and maintenance.
Figure 3.5: The POOLEX Silverline heat pump's energy efficiency, demonstrating up to 80% savings compared to traditional heating methods. This image highlights the economic benefit of using the heat pump.
Figure 3.6: The POOLEX Silverline 90 heat pump uses R410 ecological refrigerant, emphasizing its environmental friendliness. This image points out the type of refrigerant used and its eco-conscious design.
Figure 3.7: The POOLEX Silverline heat pump offers 6 capacities for pools up to 85m³, with a power range of 5.5 to 18 kW. This image illustrates the versatility and scalability of the heat pump series.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
4.1 സൈറ്റ് തിരഞ്ഞെടുക്കൽ
Choose a well-ventilated outdoor location, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow (minimum 50cm from walls or other obstructions). The ground must be level and capable of supporting the unit's weight (49 kg).
4.2 പ്ലംബിംഗ് കണക്ഷൻ
- Connect the heat pump to your pool's filtration system after the filter and before any chemical injection points.
- Use the provided PVC connectors (Ø 50mm) for water inlet and outlet.
- Ensure all connections are watertight to prevent leaks.
- Install a bypass valve system to allow for maintenance without draining the pool.
4.3 ഇലക്ട്രിക്കൽ കണക്ഷൻ
Electrical installation must be performed by a certified electrician in accordance with local regulations.
- The unit requires an electrical power supply (Type: Electric).
- Ensure the circuit is protected by a suitable circuit breaker and residual current device (RCD).
- യൂണിറ്റ് ശരിയായി ഗ്രൗണ്ട് ചെയ്യുക.
- Connect the wired control extension (10m) if using the remote panel.
4.4 പ്രാരംഭ ആരംഭം
- Ensure the pool pump is running and water is flowing through the heat pump.
- Turn on the power supply to the heat pump.
- Set the desired water temperature using the LCD control panel.
- Allow several hours or days for the pool water to reach the set temperature, depending on initial water temperature and ambient conditions.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
5.1 Control Panel (Touch & Go)
The heat pump is equipped with an LCD control panel featuring Touch & Go technology for easy operation. Refer to the specific instructions provided with the control panel for detailed navigation.
5.2 താപനില ക്രമീകരണം
Use the up/down arrows on the control panel to adjust the desired pool water temperature. The unit will automatically operate to maintain this temperature.
5.3 ഓപ്പറേറ്റിംഗ് മോഡുകൾ
The heat pump primarily operates in heating mode. It will automatically turn on when the pool water temperature drops below the set point and turn off once the set point is reached.
5.4 Wi-Fi Module (Optional)
An optional Wi-Fi module is available for remote control and monitoring. Consult the Wi-Fi module's separate manual for installation and operation instructions.
6. പരിപാലനം
6.1 റെഗുലർ ക്ലീനിംഗ്
- Keep the area around the heat pump clear of debris, leaves, and other obstructions.
- Clean the evaporator coil regularly with a soft brush or low-pressure water to ensure efficient airflow.
- പുറംഭാഗം തുടയ്ക്കുക casinപരസ്യത്തോടുകൂടിയ ജിamp തുണി.
6.2 ശീതകാലം
Before winter or prolonged periods of non-use, it is essential to properly winterize the heat pump:
- വൈദ്യുതി വിതരണം വിച്ഛേദിക്കുക.
- Drain all water from the heat pump's plumbing system to prevent freezing damage.
- Cover the unit with the provided maintenance cover or a suitable protective cover.
6.3 കണ്ടൻസേറ്റ് ഡ്രെയിനേജ്
Ensure the condensate drainage hose is clear and properly routed to allow water to drain away from the unit's base.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Heat pump not starting | No power; circuit breaker tripped; low water flow. | Check power supply; reset circuit breaker; ensure pool pump is running and filter is clean. |
| അപര്യാപ്തമായ ചൂടാക്കൽ | Ambient temperature too low; dirty evaporator coil; incorrect temperature setting; undersized unit for pool volume. | Heat pump efficiency decreases in cold weather; clean coil; verify temperature setting; ensure unit matches pool size (40-50m³ for this model). |
| അസാധാരണമായ ശബ്ദം | Loose components; fan obstruction; compressor issue. | Check for loose parts; clear any obstructions from fan; if compressor noise persists, contact qualified technician. |
| വെള്ളം ചോരുന്നു | Loose plumbing connections; condensate drainage issue. | Tighten connections; ensure condensate hose is clear and properly routed. Note: Condensate drainage is normal operation. |
For issues not listed or if problems persist, contact a qualified service technician or POOLEX customer support.
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | PC-SLP090 |
| ബ്രാൻഡ് | POOLEX (Manufacturer: Poolstar) |
| പവർ ഔട്ട്പുട്ട് | 9 kW |
| ശുപാർശ ചെയ്യുന്ന പൂൾ വോളിയം | 40 to 50 m³ (up to 110 m³ compatible) |
| കംപ്രസ്സർ തരം | High-performance Mitsubishi compressor |
| എക്സ്ചേഞ്ചർ തരം | Double-spiral titanium exchanger (Twisted Tech) |
| COP (26/26 conditions) | > 6 |
| അളവുകൾ (L x W x H) | 92.7 x 34 x 63.6 സെ.മീ |
| ഭാരം | 49 കി.ഗ്രാം |
| ഊർജ്ജ തരം | ഇലക്ട്രിക് |
| റഫ്രിജറൻ്റ് | R410 (പാരിസ്ഥിതിക) |
| നിയന്ത്രണ പാനൽ | LCD with Touch & Go technology |
| അനുയോജ്യത | Compatible with all pool types, including salt treatment. |
9. വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Poolstar webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
Included accessories: Anti-vibration support kit, PVC connectors (Ø 50mm 1½''), condensate drainage hose, multi-language user manual, wired control extension (10m).
