1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The STEELMATE SBS-1 is a microwave-based blind spot detection system designed to enhance driving safety. It identifies vehicles in the blind spot areas on both sides of your vehicle, which are not visible through standard rearview or side mirrors. When a vehicle enters the detection zone during overtaking or lane changes, the system provides an audible and visual alert to the driver.
Image: Main components of the STEELMATE SBS-1 system, including the ECU, sensors, and wiring, neatly arranged in protective foam packaging.
2. സുരക്ഷാ വിവരങ്ങളും നിയമപരമായ നിരാകരണവും
This product is intended to provide warnings to drivers regarding approaching vehicles in adjacent lanes within the blind spot zone. It is not designed to completely replace the driver's judgment. Drivers must adhere to local traffic regulations and maintain good driving habits. STEELMATE does not guarantee or assume liability for any accidents.
Always exercise caution and perform visual checks before changing lanes or making maneuvers.
3. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ ഇനിപ്പറയുന്ന എല്ലാ ഘടകങ്ങളും ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:
- ECU (Electronic Control Unit) x 1
- 79GHz Microwave Sensors x 2
- Main Wiring Harness x 1
- Display Wiring x 1
- കാന്തങ്ങൾ x 2
- ആൽക്കഹോൾ പാഡുകൾ x 2
- ഉപയോക്തൃ മാനുവൽ x 1
Image: The various wiring harnesses and the user manual included with the STEELMATE SBS-1 system.
4 സ്പെസിഫിക്കേഷനുകൾ
| ഘടകം | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ECU Operating Voltage | DC 9~30V (Compatible with 12V & 24V systems) |
| ECU Operating Current | <300mA |
| ECU Operating Temperature | -40℃~+85℃ / -40℉~+185℉ |
| Sensor Operating Frequency | 77~81GHz |
| സെൻസർ ഓപ്പറേറ്റിംഗ് താപനില | -40℃~+85℃ / -40℉~+185℉ |
| Sensor IP Rate | IP67 (പൊടി പ്രതിരോധശേഷിയുള്ളതും വെള്ളം കടക്കാത്തതും) |
| കണ്ടെത്തൽ പരിധി | ≥5 meters / 16.4 ft |
| ഇൻസ്റ്റലേഷൻ ഉയരം | 55±10 cm / 1.8±0.3 ft |
| കണ്ടെത്തൽ കൃത്യത | ± 5 ഡിഗ്രി |
| Relative Speed Range | >5km/h (3.1 mph) and <40 km/h (24.9 mph) |
| Display Buzzer Frequency | 1KHz ± 0.1KHz |
| പ്രവർത്തന താപനില പ്രദർശിപ്പിക്കുക | -20℃~+70℃ / -4℉~+158℉ |
| ഇനത്തിൻ്റെ ഭാരം | 2.29 പൗണ്ട് |
| പാക്കേജ് അളവുകൾ | 9.61 x 9.21 x 4.17 ഇഞ്ച് |
| നിർമ്മാതാവിൻ്റെ ഭാഗം നമ്പർ | ITB BSD |
| പിന്തുണയ്ക്കുന്ന ഫ്രീക്വൻസി ബാൻഡുകൾ | 77 GHz, 78 GHz, 79 GHz, 80 GHz, 81 GHz |
| പവർ ഉറവിടം | കോർഡഡ് ഇലക്ട്രിക് |
| ഡിസ്പ്ലേ തരം | Physical Display |
5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The STEELMATE SBS-1 system is designed for straightforward installation. It features a patented display for the A-pillar that does not require stickers or glue, and its ON/OFF function is optional. The radar sensors are designed to be mounted behind the bumper without drilling holes.
5.1 സെൻസർ പ്ലേസ്മെന്റ്
The 79GHz microwave radar sensors should be installed behind the rear bumper. Ensure the sensors are positioned correctly to achieve the optimal 120° Field of View (FOV) for blind spot detection. No drilling is required; the sensors can be adhered to the bumper's inner surface.
Image: Illustration showing the recommended placement of the radar sensor behind the vehicle's bumper for optimal blind spot coverage.
5.2 ECU and Wiring Connection
Connect the sensors, display, and vehicle power supply to the ECU using the provided main and display wiring harnesses. Ensure all connections are secure and properly insulated. The ECU operates on DC 9-30V, making it compatible with both 12V and 24V vehicle electrical systems.
Image: The Electronic Control Unit (ECU) for the STEELMATE SBS-1 system, which processes sensor data and controls alerts.
5.3 ഡിസ്പ്ലേ ഇൻസ്റ്റലേഷൻ
The visual alert display can be inserted anywhere between the A-pillar and the dashboard. It provides visual warnings and can be optionally turned ON or OFF. The display is designed to be discreet and integrate seamlessly into the vehicle's interior.
Image: The compact visual display unit integrated into the A-pillar of a vehicle, showing a warning light for blind spot detection.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once installed and powered, the STEELMATE SBS-1 system continuously monitors your vehicle's blind spots using its 79GHz microwave radar sensors. The system activates when your vehicle's speed is within the relative speed range of >5 km/h (3.1 mph) and <40 km/h (24.9 mph) relative to other vehicles.
6.1 കണ്ടെത്തൽ തത്വം
The sensors detect objects within a range of at least 5 meters (16.4 ft) and a 120° field of view. When another vehicle enters this detection zone, the system processes the information through the ECU.
Image: A top-down diagram showing the 120-degree field of view and the detection range (250cm side, 300cm rear) of the blind spot sensors around a vehicle.
6.2 അലേർട്ട് സിസ്റ്റം
Upon detecting a vehicle in the blind spot, the system provides both visual and audible alerts:
- വിഷ്വൽ അലേർട്ട്: The A-pillar display will illuminate or flash, indicating a detected object.
- കേൾക്കാവുന്ന അലേർട്ട്: A buzzer will sound at a frequency of 1KHz±0.1KHz, providing an auditory warning.
These alerts are designed to draw the driver's attention to potential hazards during lane changes or overtaking maneuvers.
Image: A visual representation of the blind spot detection system in operation, showing a vehicle in the detection zone triggering an alert.
7. പരിപാലനം
To ensure optimal performance and longevity of your STEELMATE SBS-1 system, consider the following maintenance guidelines:
- സെൻസർ ക്ലീനിംഗ്: Periodically inspect the areas where the sensors are installed (behind the bumper) and ensure they are free from excessive dirt, mud, snow, or ice. While the sensors are IP67 rated for dust and water resistance, heavy accumulation can obstruct their operation.
- വയറിംഗ് പരിശോധന: Occasionally check the wiring harnesses for any signs of wear, damage, or loose connections.
- സിസ്റ്റം പരിശോധന: If you notice any unusual behavior or a lack of alerts when expected, perform a basic system check by driving in conditions where the system should activate.
8. പ്രശ്നപരിഹാരം
If you encounter issues with your STEELMATE SBS-1 system, consider the following common troubleshooting steps:
- അലേർട്ടുകളൊന്നുമില്ല:
- Ensure the system is powered on and all connections are secure.
- Verify that the display's optional ON/OFF function is set to ON.
- Check if sensors are obstructed by dirt or debris.
- Confirm that the relative speed conditions for activation are met (>5km/h and <40km/h).
- തെറ്റായ അലേർട്ടുകൾ:
- Ensure sensors are correctly installed and not pointing at parts of your own vehicle or fixed objects.
- Check for any loose wiring that might cause intermittent signals.
- ഇടയ്ക്കിടെയുള്ള പ്രവർത്തനം:
- Inspect all wiring for damage or corrosion.
- Ensure stable power supply to the ECU.
For persistent issues, please contact STEELMATE customer support for further assistance.
9. വാറൻ്റിയും പിന്തുണയും
For information regarding product warranty, returns, or technical support, please refer to the official STEELMATE website or contact their customer service department directly. Keep your purchase receipt and product model number (SBS-1) readily available when seeking support.
നിർമ്മാതാവ്: സ്റ്റീൽമേറ്റ്
നിർമ്മാതാവിൻ്റെ ഭാഗം നമ്പർ: ITB BSD
