Obsidian NX Wing Lighting Controller User Manual

1. ആമുഖം

The Obsidian NX Wing is a compact and powerful USB control surface designed for the Obsidian ONYX lighting control platform. It provides tactile control over your lighting system, enhancing workflow and precision for professional lighting operators. This manual provides essential information for setting up, operating, and maintaining your NX Wing.

ചിത്രം 1: Obsidian NX Wing Lighting Controller. This image displays the top view of the NX Wing, showcasing its array of faders, buttons, rotary encoders, and the integrated touchscreen. The "NX WING" logo is visible on the lower right.

2. സജ്ജീകരണം

Follow these steps to set up your Obsidian NX Wing:

1. സോഫ്റ്റ്‌വെയർ ഇൻസ്റ്റാളേഷൻ: Ensure the Obsidian ONYX software is installed on your PC (Windows operating system required). The NX Wing functions as a control surface for this software. A 64-universe ONYX license is typically included with the purchase of the NX Wing.
2. USB ബന്ധിപ്പിക്കുക: Connect the NX Wing to your PC using a standard USB cable. The device is designed for plug-and-play operation.
3. പവർ ഓൺ: The NX Wing is typically powered via the USB connection. Once connected, the device should initialize.
4. സോഫ്റ്റ്‌വെയർ തിരിച്ചറിയൽ: Launch the ONYX software. The NX Wing should be automatically recognized as a control surface. Verify its status within the ONYX software settings.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The NX Wing provides a comprehensive set of controls for interacting with the ONYX lighting platform.

3.1 Control Layout Overview

• ഫേഡറുകൾ: Ten 60mm faders are located on the left side of the unit, each accompanied by four assignable buttons. These are primarily used for intensity control, playback levels, or other assigned parameters.
• റോട്ടറി എൻകോഡറുകൾ: Four large-format digital rotary encoders are positioned towards the top right. These are used for fine-tuning parameters, navigating menus, or adjusting values within the ONYX software.
• Multi-function Hotkeys: Eight multi-function hotkeys provide quick access to frequently used functions or custom macros.
• പ്ലേബാക്ക് ബട്ടണുകൾ: Ten playback buttons are available for triggering cues, sequences, or other playback elements.
• Internal Touchscreen: An integrated touchscreen provides visual feedback and additional control options, mirroring or extending the ONYX software interface.
• Master Go Section: Dedicated buttons for Go, Pause, Snap, and Release provide immediate control over cue lists and playbacks.
• Navigation and Edit Keys: Keys such as "Copy", "Undo", "Clear", "Move", "Delete", "Record", "Update", "Load", "Group", "Cue", "Enter", and "/Back" facilitate editing and navigation within the ONYX software.

3.2 അടിസ്ഥാന പ്രവർത്തനം

Refer to the Obsidian ONYX software manual for detailed instructions on assigning functions to faders, buttons, and encoders. The NX Wing acts as a direct hardware interface for the software's capabilities.

• ഫേഡർ നിയന്ത്രണം: Move faders up and down to adjust assigned parameters. The four buttons below each fader can be configured for various functions like flash, solo, or page changes.
• Encoder Use: Rotate encoders to change values. Pressing an encoder may activate an alternate function or confirm a selection.
• ഹോട്ട്കീ പ്രവർത്തനങ്ങൾ: Utilize the hotkeys for quick access to common operations or custom commands defined in ONYX.
• ടച്ച്‌സ്‌ക്രീൻ ഇടപെടൽ: Interact with the touchscreen for direct manipulation of the ONYX graphical user interface.

4. പരിപാലനം

Proper maintenance ensures the longevity and optimal performance of your NX Wing.

• വൃത്തിയാക്കൽ: Use a soft, dry, lint-free cloth to clean the surface of the unit. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the device. Avoid abrasive cleaners or solvents.
• സംഭരണം: Store the NX Wing in a cool, dry environment, away from direct sunlight, extreme temperatures, and excessive dust. When transporting, use appropriate protective casing.
• കേബിൾ കെയർ: Regularly inspect USB cables for damage. Replace any frayed or damaged cables to prevent connectivity issues.

5. പ്രശ്‌നപരിഹാരം

If you encounter issues with your NX Wing, refer to the following common solutions:

• ഉപകരണം തിരിച്ചറിഞ്ഞിട്ടില്ല:
  • Ensure the USB cable is securely connected to both the NX Wing and your PC.
  • Try a different USB port on your PC.
  • Verify that the ONYX software is running and up to date.
  • Check your PC's Device Manager to see if the NX Wing is listed and if there are any driver issues.
• നിയന്ത്രണങ്ങൾ പ്രതികരിക്കുന്നില്ല:
  • Restart the ONYX software.
  • Disconnect and reconnect the USB cable to the NX Wing.
  • Ensure no other applications are interfering with the USB connection or ONYX software.
• സോഫ്റ്റ്‌വെയർ പ്രശ്നങ്ങൾ:
  • Consult the Obsidian ONYX software documentation or online support resources for software-specific problems.
  • Ensure your PC meets the minimum system requirements for the ONYX software.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

For information regarding warranty coverage, technical support, or service, please contact Obsidian Control Systems directly or refer to their official webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

Obsidian Control Systems Official Webസൈറ്റ്: www.obsidiancontrol.com (ഉദാampലിങ്ക്, യഥാർത്ഥ ലിങ്ക് വ്യത്യാസപ്പെടാം)