1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The WAGO 284-681 is a 3-conductor through terminal block designed for reliable electrical connections. This terminal block facilitates secure wiring within control cabinets and industrial applications, offering a compact and efficient solution for distributing electrical potential.
Key features include its DIN rail mount compatibility and screw-type connection, ensuring robust and stable installations.
ചിത്രം 1: ക്രോസ്-സെക്ഷൻ view of the WAGO 284-681 3-Conductor Through Terminal Block, showing the internal spring clamp mechanism and conductor pathways. The grey housing encases the metallic current bar and the spring-loaded clamping units for secure wire termination.
2 സുരക്ഷാ വിവരങ്ങൾ
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ മാത്രമേ ഇൻസ്റ്റാളേഷൻ നടത്താവൂ.
- Ensure power is disconnected before working on electrical circuits.
- ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ഉപയോഗിക്കുക.
- Verify correct wire gauge and insulation for the application.
- നിർദ്ദിഷ്ട വോളിയം കവിയരുത്tage and current ratings of the terminal block.
- Inspect terminal blocks for damage before installation. Do not use damaged products.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The WAGO 284-681 terminal block is designed for DIN rail mounting. Follow these steps for proper installation:
- DIN റെയിലിൽ മൗണ്ടിംഗ്:
Align the terminal block with the DIN rail. Press the block firmly onto the rail until it clicks into place. Ensure it is securely seated and does not wobble.
- വയർ തയ്യാറാക്കൽ:
Strip approximately 9-10 mm (0.35-0.39 inches) of insulation from the conductor ends. Ensure the conductor strands are not damaged during stripping.
- Conductor Connection (Screw Type):
Insert the prepared conductor into the designated clamping unit. Use an appropriate screwdriver to tighten the screw firmly. Ensure the conductor is fully seated and the screw is tightened to the recommended torque (refer to technical specifications for exact values, typically found on product packaging or WAGO's official documentation). Gently pull on the wire to confirm a secure connection.
- പരിശോധന:
After all connections are made, perform continuity and insulation resistance tests to verify proper wiring and prevent short circuits.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once installed and wired, the WAGO 284-681 terminal block functions as a passive component for electrical distribution. No active operation is required beyond ensuring proper connections and adherence to electrical safety standards.
- വാല്യംtagഇ, കറന്റ്: പ്രയോഗിച്ച വോളിയം ഉറപ്പാക്കുകtage and current do not exceed the maximum ratings specified for the terminal block.
- പരിസ്ഥിതി വ്യവസ്ഥകൾ: Operate the terminal block within its specified environmental conditions (temperature, humidity) to ensure optimal performance and longevity.
5. പരിപാലനം
The WAGO 284-681 terminal block is designed for maintenance-free operation under normal conditions. However, periodic inspection is recommended to ensure continued reliability.
- വിഷ്വൽ പരിശോധന: Periodically inspect the terminal blocks for any signs of physical damage, discoloration, or loose connections.
- കണക്ഷൻ സമഗ്രത: If accessible and safe to do so (with power disconnected), gently check the tightness of screw connections, especially in environments subject to vibration or significant temperature fluctuations.
- വൃത്തിയാക്കൽ: If necessary, clean the exterior of the terminal block with a dry, lint-free cloth. Do not use solvents or abrasive cleaners.
6. പ്രശ്നപരിഹാരം
Most issues related to terminal blocks stem from improper installation or exceeding operational limits. Refer to the following common issues and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Loose connection / Intermittent contact | Insufficient tightening of screw; improper wire stripping; wire pull-out. | Disconnect power. Re-strip wire if necessary. Re-insert and tighten screw to recommended torque. Verify connection by gently pulling the wire. |
| Overheating / Discoloration | Overcurrent; loose connection; environmental factors. | Disconnect power immediately. Check circuit for overcurrent conditions. Inspect connections for looseness. Ensure ambient temperature is within specified limits. Replace damaged terminal block. |
| Difficulty inserting wire | Wire gauge too large; screw not sufficiently loosened. | Ensure wire gauge matches terminal block specifications. Loosen the screw completely before attempting to insert the wire. |
If problems persist, consult a qualified electrician or contact WAGO technical support.
7 സാങ്കേതിക സവിശേഷതകൾ
The following specifications apply to the WAGO 284-681 3-Conductor Through Terminal Block:
- മോഡൽ: 284-681
- ബ്രാൻഡ്: വാഗോ
- ധ്രുവങ്ങളുടെ എണ്ണം: 3
- കണക്റ്റർ തരം: സ്ക്രൂ
- മൗണ്ടിംഗ് തരം: DIN റെയിൽ മ .ണ്ട്
- സ്പെസിഫിക്കേഷൻ മെറ്റ്: DIN
- ASIN: B07QJB7CTQ
- നിർമ്മാതാവ്: വാഗോ
- ആദ്യം ലഭ്യമായത്: ഫെബ്രുവരി 9, 2020
- Note: For detailed electrical ratings (voltage, current, wire size range), please refer to the product packaging or official WAGO datasheets.
