ജാഡ 30721

Jada Hyperchargers 1:16 2017 Ford GT Remote Control Car

മോഡൽ: 30721 | ബ്രാൻഡ്: ജാഡ കളിപ്പാട്ടങ്ങൾ

ആമുഖം

This instruction manual provides essential information for the safe and proper operation, maintenance, and troubleshooting of your Jada Hyperchargers 1:16 2017 Ford GT Remote Control Car. Please read this manual thoroughly before use and retain it for future reference.

The Jada Hyperchargers 1:16 2017 Ford GT is a full-function radio control car designed for enthusiasts aged 8 and up, featuring custom styling and a 2.4 GHz frequency for multi-player racing.

ബോക്സിൽ എന്താണുള്ളത്

സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: This product contains small parts and is not suitable for children under 3 years of age due to choking hazards. Recommended for ages 8 years and up.

ഉൽപ്പന്നം കഴിഞ്ഞുview

Jada Hyperchargers 1:16 2017 Ford GT Remote Control Car and Controller

Figure 1: The 1:16 scale 2017 Ford GT remote control car alongside its 2.4 GHz controller. The car features a sleek black finish with white racing stripes and the number '2' on the side.

പിൻഭാഗം view of Jada Hyperchargers 2017 Ford GT RC Car

ചിത്രം 2: പിൻഭാഗം view of the Ford GT RC car, highlighting the detailed taillights, exhaust, and rear spoiler. The racing stripes continue from the roof to the rear.

മുകളിൽ view of Jada Hyperchargers 2017 Ford GT RC Car

ചിത്രം 3: മുകളിൽ നിന്ന് താഴേക്ക് view of the Ford GT RC car, showcasing the prominent white racing stripes running along the hood and roof, and the number '2' on the front hood.

Underside of Jada Hyperchargers 2017 Ford GT RC Car

Figure 4: Underside of the Ford GT RC car, showing the battery compartment, ON/OFF/CHARGE switch, and the steering trim adjustment. The USB charging cable is integrated into this section.

സജ്ജമാക്കുക

1. റിമോട്ട് കൺട്രോളർ ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The remote controller requires 2 AA batteries (included).

  1. റിമോട്ട് കൺട്രോളറിന്റെ പിൻഭാഗത്ത് ബാറ്ററി കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക.
  2. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ തുറക്കുക.
  3. കമ്പാർട്ടുമെന്റിനുള്ളിൽ സൂചിപ്പിച്ചിരിക്കുന്നതുപോലെ ശരിയായ പോളാരിറ്റി (+/-) ഉറപ്പാക്കിക്കൊണ്ട് 2 AA ബാറ്ററികൾ ഇടുക.
  4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

2. വാഹന ചാർജിംഗ്

The vehicle is powered by a built-in Lithium-Ion rechargeable battery and features an attached USB plug for convenient charging.

  1. Locate the USB charging plug on the underside of the vehicle (refer to Figure 4).
  2. Ensure the vehicle's power switch is in the "OFF/CHARGE" position.
  3. Plug the USB connector into any standard USB power source (e.g., computer USB port, USB wall adapter).
  4. ചാർജ് ചെയ്യുമ്പോൾ വാഹനത്തിലെ ചാർജിംഗ് ഇൻഡിക്കേറ്റർ ലൈറ്റ് പ്രകാശിക്കും.
  5. Charging time may vary. Refer to the packaging for estimated charging duration.
  6. Once fully charged, disconnect the USB plug and store it securely in its compartment.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. Pairing the Controller and Vehicle

Your Jada Hyperchargers RC car operates on a 2.4 GHz frequency, allowing multiple players to race simultaneously without interference.

  1. Ensure the remote controller has fresh batteries installed.
  2. Turn on the vehicle by sliding the power switch to the "ON" position (refer to Figure 4).
  3. റിമോട്ട് കൺട്രോളർ ഓണാക്കുക.
  4. The controller and vehicle should automatically pair. If not, turn both off and then on again.
  5. A successful connection is indicated by the vehicle's lights or a specific sound (refer to product packaging for details).

2. വാഹനം ഓടിക്കൽ

റിമോട്ട് കൺട്രോളറിന്റെ പ്രവർത്തനങ്ങളെക്കുറിച്ച് സ്വയം പരിചയപ്പെടുക:

The 2.4 GHz frequency enables a range of up to 100 feet. For optimal performance, operate the vehicle on smooth, flat surfaces.

3. Steering Trim Adjustment

If the vehicle does not drive straight, use the steering trim adjustment located on the underside of the car (refer to Figure 4) to fine-tune its alignment.

മെയിൻ്റനൻസ്

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Vehicle not responding to controller.Low or dead batteries in controller; Vehicle battery low; Not paired correctly.Replace AA batteries in the controller; Recharge the vehicle's battery; Turn both vehicle and controller off, then on again to re-pair.
Short operating range or interference.Obstacles blocking signal; Other 2.4 GHz devices.Operate the vehicle in an open area; Move away from other electronic devices that may cause interference.
Vehicle drives crooked.സ്റ്റിയറിംഗ് ട്രിം ക്രമീകരിക്കേണ്ടതുണ്ട്.Adjust the steering trim knob/slider on the underside of the vehicle until it drives straight.
USB cord door on vehicle does not stay closed.Potential manufacturing defect.Contact Jada Toys customer support for assistance or replacement.
Motor not working (e.g., no forward/reverse).Internal wiring issue or motor malfunction.Do not attempt to repair yourself. Contact Jada Toys customer support for repair or replacement options.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For information regarding product warranty, returns, or technical support, please refer to the original product packaging or contact Jada Toys customer service directly.

You can also visit the official Jada Toys store for more information and contact options: ആമസോണിലെ ജാഡ ടോയ്‌സ് സ്റ്റോർ.

പിന്തുണയുമായി ബന്ധപ്പെടുമ്പോൾ നിങ്ങളുടെ മോഡൽ നമ്പറും (30721) വാങ്ങൽ വിശദാംശങ്ങളും തയ്യാറായി വയ്ക്കുക.

അനുബന്ധ രേഖകൾ - 30721

പ്രീview ജാഡ FF19 7.5" RC കാർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ
ജാഡ എഫ്എഫ്19 7.5 ഇഞ്ച് ആർസി കാർ പ്രവർത്തിപ്പിക്കുന്നതിനും പരിപാലിക്കുന്നതിനുമുള്ള നിർദ്ദേശങ്ങൾ ഈ പ്രമാണം നൽകുന്നു, അതിൽ വേപ്പർ ഫംഗ്ഷൻ, ടർബോ ബൂസ്റ്റ് തുടങ്ങിയ സവിശേഷതകളും ഉൾപ്പെടുന്നു. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ, ട്രബിൾഷൂട്ടിംഗ്, സുരക്ഷാ മുൻകരുതലുകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ജാഡ 1/16" ആർസി വാഹനം: ഉപയോക്തൃ മാനുവലും ഓപ്പറേഷൻ ഗൈഡും
നിങ്ങളുടെ ജാഡ 1/16" റിമോട്ട് കൺട്രോൾ വാഹനത്തിനായുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ നേടുക. മോഡൽ F84228-KMAR-1SH-EN01A-യുടെ സജ്ജീകരണം, ചാർജിംഗ്, പ്ലേ ചെയ്യൽ, ട്രബിൾഷൂട്ടിംഗ്, സുരക്ഷ, നിയന്ത്രണ വിവരങ്ങൾ എന്നിവ ഈ ഗൈഡിൽ ഉൾപ്പെടുന്നു.
പ്രീview സ്പൈഡർമാൻ ആർസി സ്റ്റാൻഡിംഗ് ഡ്രിഫ്റ്റ് ഫംഗ്ഷൻ - ഫൈവ് വീൽ സ്റ്റണ്ട് എഫ്സിസി ടെസ്റ്റ് റിപ്പോർട്ട്
ജാഡ ടോയ്‌സ് കമ്പനി ലിമിറ്റഡിന്റെ സ്‌പൈഡർ-മാൻ ആർസി സ്റ്റാൻഡിംഗ് ഡ്രിഫ്റ്റ് ഫംഗ്‌ഷനായുള്ള എഫ്‌സിസി ടെസ്റ്റ് റിപ്പോർട്ട് - ഫൈവ് വീൽ സ്റ്റണ്ട്, എഫ്‌സിസി പാർട്ട് 15, സബ്‌പാർട്ട് സി അനുസരിച്ച് റേഡിയേറ്റഡ് എമിഷൻ, ബാൻഡ്‌വിഡ്ത്ത് അളവുകൾ എന്നിവ വിശദീകരിക്കുന്നു.
പ്രീview ജാഡ ടോയ്‌സ് ബാക്ക് ടു ദ ഫ്യൂച്ചർ ടൈം മെഷീൻ R/C 1:16 സ്കെയിൽ - യൂസർ മാനുവൽ
ജാഡ ടോയ്‌സ് ബാക്ക് ടു ദി ഫ്യൂച്ചർ ടൈം മെഷീൻ ആർ/സി 1:16 സ്കെയിൽ റിമോട്ട് കൺട്രോൾ വാഹനത്തിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവലും സുരക്ഷാ ഗൈഡും. പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങളും വാറന്റി വിശദാംശങ്ങളും സഹിതം നിങ്ങളുടെ ആർസി കാർ എങ്ങനെ ചാർജ് ചെയ്യാമെന്നും പ്രവർത്തിപ്പിക്കാമെന്നും ട്രബിൾഷൂട്ട് ചെയ്യാമെന്നും പരിപാലിക്കാമെന്നും അറിയുക.
പ്രീview ജാഡ ടോയ്‌സ് ആർസി ബഗ്ഗി വുഡി ടോയ് സ്റ്റോറി പതിപ്പ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ
ടോയ് സ്റ്റോറി ബ്രാൻഡിംഗ് ഉൾക്കൊള്ളുന്ന ജാഡ ടോയ്‌സ് ആർസി ബഗ്ഗി വുഡിയുടെ ഔദ്യോഗിക നിർദ്ദേശ മാനുവൽ. സജ്ജീകരണം, പ്രവർത്തനം, ബാറ്ററി ഇൻസ്റ്റാളേഷൻ, സുരക്ഷാ മുന്നറിയിപ്പുകൾ, ഉപഭോക്തൃ പിന്തുണ വിവരങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview ജുറാസിക് വേൾഡ് ജീപ്പ് ആർസി 1:16 - ജാഡ ടോയ്‌സ് ഇൻസ്ട്രക്ഷൻ ഷീറ്റ്
ജാഡ ടോയ്‌സ് ജുറാസിക് വേൾഡ് ജീപ്പ് ആർ‌സി 1:16 പ്രവർത്തിപ്പിക്കുന്നതിനുള്ള അവശ്യ മാർഗ്ഗനിർദ്ദേശങ്ങൾ ഈ നിർദ്ദേശ ഷീറ്റ് നൽകുന്നു. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ, വാഹന ജോടിയാക്കൽ, ടർബോ ബൂസ്റ്റ് സവിശേഷതകൾ, സുരക്ഷിതവും ആസ്വാദ്യകരവുമായ കളിയ്ക്കുള്ള ട്രബിൾഷൂട്ടിംഗ് നുറുങ്ങുകൾ എന്നിവയെക്കുറിച്ച് അറിയുക.