MAXOAK Portable Power Station EB150 User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The MAXOAK Portable Power Station EB150 is a versatile and high-capacity lithium battery backup system designed to provide reliable power for various applications, from home use and outdoor activities to emergency situations. With its robust design and multiple output options, it serves as an excellent portable power solution.

ചിത്രം 1: മുൻഭാഗം view of the MAXOAK Portable Power Station EB150.

2. എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്

Upon unboxing your MAXOAK EB150, please verify that all components listed below are present and in good condition.

Figure 2: Included components in the MAXOAK EB150 package.

• 1 x MAXOAK Portable Power Station EB150
• 1 x AC Wall Charger (200W)
• 1 x PV Solar Charging Cable (DC7909 to MC*4, 1.7 meters)
• 1 x ഉപയോക്തൃ മാനുവൽ
• 1 x വാറൻ്റി കാർഡ്

3. സജ്ജീകരണവും ചാർജിംഗും

The EB150 offers multiple charging options to ensure your power station is always ready for use.

3.1 ചാർജിംഗ് രീതികൾ

• എസി വാൾ ഔട്ട്ലെറ്റ്: Use the included 200W AC wall charger. A full charge typically takes about 8 hours.
• സോളാർ പാനൽ: The EB150 features a pre-installed MPPT controller for efficient solar charging. It supports a wide solar recharge range of 16-60V (OCV) and up to 500W max input. Charging with 2x BLUETTI SP200 solar panels can fully charge the unit in approximately 5.5-6 hours under optimal sunlight.
• ജനറേറ്റർ: The unit can also be charged via a compatible generator, taking approximately 8 hours for a full charge.

Figure 3: Three primary methods for recharging the EB150.

3.2 Solar Charging Connection

Connect your solar panels to the EB150 using the provided PV Solar Charging Cable (DC7909 to MC*4). Ensure the total voltage from your solar panels does not exceed 60V (or 68V as per updated manufacturer information) and the total wattage does not exceed 500W to prevent damage to the unit.

Figure 4: Solar charging setup with the EB150 and solar panels.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The EB150 is designed for user-friendly operation with clear indicators and multiple output ports.

4.1 പവർ ഓൺ/ഓഫ്, ഡിസ്പ്ലേ

To power on the unit, press and hold the main power button. The LCD display will illuminate, showing battery status, input wattagഇ, ഔട്ട്പുട്ട് വാട്ട്tage for both DC and AC. To power off, press and hold the main power button again.

4.2 ഔട്ട്പുട്ട് പോർട്ടുകൾ

The EB150 provides a variety of output options:

• എസി ഔട്ട്ലെറ്റുകൾ: 2 x 110V AC outlets (Pure Sine Wave) for devices up to 1000W. These are located on the rear of the unit.
• ഡിസി ഔട്ട്‌ലെറ്റുകൾ: 1 x regulated DC 12V outlet (cigarette lighter style) for car devices (e.g., mini-fridge, car vacuum cleaner).
• USB-A പോർട്ടുകൾ: 4 x 5V/3A (Max) USB ports for charging phones, tablets, cameras, and other small electronics.
• USB-C (PD) Port: 1 x 45W Type-C port for USB-C devices such as laptops (MacBook/MacBook Pro) and PD Type-C phones.

To activate DC or AC outputs, press the corresponding 'DC ON' or 'AC ON' buttons on the front panel. The display will show the wattage being drawn from these outputs.

5. Capacity and Usage Exampലെസ്

The MAXOAK EB150 boasts a 1500Wh (Watt-hour) lithium power storage capacity, capable of powering a wide range of devices. It can also be expanded by connecting a BLUETTI B300 (3072Wh) for a total capacity of 4572Wh.

Figure 5: EB150 capacity and typical device runtimes.

Typical runtimes for common devices include:

• CPAP (60W): Approximately 21 hours
• Micro Oven (700W): Approximately 1.8 hours
• Laptop (60W): Approximately 21 recharges
• Smartphone (30Wh): Approximately 159 recharges
• Electric Drill (900W): Approximately 1.6 hours
• Blender (300W): Approximately 4 hours
• Router (70W): Approximately 18 hours
• Light (10W): Approximately 127 hours

The EB150 is suitable for various applications, including home backup, outdoor adventures, RV use, and emergency preparedness. It can power multiple devices simultaneously, provided the total wattage does not exceed 1000W (1200W surge).

Figure 6: Diverse applications of the EB150.

6. പരിപാലനവും സംഭരണവും

To ensure the longevity and optimal performance of your EB150, proper maintenance and storage are crucial.

• ബാറ്ററി തരം: The EB150 uses a Lithium Ion battery, known for its durability and long cycle life (2500+ life cycles).
• സംഭരണം: For long-term storage, it is recommended to fully charge the product. Recharge the unit every 1 to 3 months to maintain battery health.
• സംരക്ഷണം: The unit features internal protection mechanisms to prevent damage from over-voltage or over-wattage. If the load exceeds 1200W, the unit will enter an error mode to protect its components.
• തണുപ്പിക്കൽ: The unit is equipped with cooling fans to dissipate heat during operation. Ensure proper ventilation around the unit.

7. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your EB150.

• ഓവർലോഡ് സംരക്ഷണം: If the unit shuts down unexpectedly, it might be due to an overload. Reduce the connected load to below 1000W (or 1200W surge) and restart the unit.
• ചാർജിംഗ് പ്രശ്നങ്ങൾ: If the unit is not charging, ensure the charging cable is securely connected and the power source (wall outlet, solar panel, generator) is functioning correctly. For solar charging, verify that the solar panel voltage is within the 16-60V (or 68V) range.
• ഡിസ്പ്ലേ തകരാർ: If the LCD display is not showing correct readings or is unresponsive, try powering off and restarting the unit.
• എസി ഔട്ട്പുട്ട് ഫ്രീക്വൻസി: The unit's AC output frequency (50Hz/60Hz) can be checked and changed. This typically requires unplugging the AC charger from the unit first. Refer to the detailed user manual for specific steps.

8 സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the MAXOAK Portable Power Station EB150.

Figure 7: Dimensions of the EB150.

9. വാറൻ്റിയും പിന്തുണയും

MAXOAK provides a 12-month warranty for return, repair, or replacement for any quality problems. For support, please refer to the contact information provided in your warranty card or visit the official BLUETTI store online.

Official BLUETTI Store: BLUETTI Amazon Store