1. ആമുഖം
This manual provides essential information for the safe and efficient operation of your DJI Inspire 2 Series Part 89 CINESSD Station, UG2 Version. Please read this manual thoroughly before using the product and retain it for future reference.
The CINESSD Station is designed to facilitate high-speed data transfer from DJI CINESSD storage devices, primarily used with the DJI Inspire 2 drone, to a computer via a USB 3.0 interface.
2 സുരക്ഷാ വിവരങ്ങൾ
- വെള്ളം അല്ലെങ്കിൽ ഈർപ്പം ഉപകരണം തുറന്നുകാട്ടരുത്.
- Avoid extreme temperatures. Operate and store the device within recommended environmental conditions.
- Do not attempt to disassemble or modify the device. Unauthorized modifications can void the warranty and pose safety risks.
- Use only approved accessories and cables.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
3. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- DJI CINESSD Station (UG2 Version)
- യുഎസ്ബി 3.0 കേബിൾ
Figure 3.1: The DJI CINESSD Station (UG2 Version) shown alongside its included USB 3.0 cable. The station is a compact, dark gray rectangular device, and the cable is black with a blue USB 3.0 connector.
4. ഉൽപ്പന്നം കഴിഞ്ഞുview
The DJI CINESSD Station UG2 is a dedicated device for transferring data from DJI CINESSD cards to a computer. It features a robust design and high-speed connectivity.
4.1 ഫ്രണ്ട് View
ചിത്രം 4.1: മുൻഭാഗം view of the DJI CINESSD Station UG2. The device is dark gray with the DJI logo and "DJI CINESSD STATION Ver:UG2" printed on its surface.
4.2 CINESSD Slot
The CINESSD slot is located on one end of the station, designed for secure insertion of DJI CINESSD cards.
ചിത്രം 4.2: വശം view of the DJI CINESSD Station UG2, highlighting the rectangular slot for inserting a CINESSD card. The slot is surrounded by a textured, gridded surface.
4.3 യുഎസ്ബി പോർട്ടുകൾ
The station is equipped with a USB 3.0 port for high-speed data transfer to your computer.
ചിത്രം 4.3: വശം view of the DJI CINESSD Station UG2, displaying the USB 3.0 port (blue interior) and a smaller micro-USB port. These ports are used for connecting the station to a computer.
5. സജ്ജീകരണം
Follow these steps to set up your CINESSD Station:
- Insert CINESSD: Gently insert the DJI CINESSD card into the CINESSD slot on the station until it clicks into place. Ensure the card is oriented correctly.
- കമ്പ്യൂട്ടറുമായി ബന്ധിപ്പിക്കുക: Connect one end of the provided USB 3.0 cable to the USB 3.0 port on the CINESSD Station and the other end to an available USB 3.0 port on your computer.
- പവർ ഓൺ: The station typically draws power directly from the USB connection. No external power adapter is usually required.
- ഡ്രൈവർ ഇൻസ്റ്റാളേഷൻ (ആവശ്യമെങ്കിൽ): Your operating system should automatically recognize the device. If prompted, follow the on-screen instructions to install any necessary drivers.
6. Operating the CINESSD Station
Once connected, the CINESSD Station will appear as an external drive on your computer, allowing you to access the data stored on the CINESSD card.
- ആക്സസ് ഡാറ്റ: Navigate to 'My Computer' (Windows) or 'Finder' (macOS) and locate the newly mounted drive.
- കൈമാറ്റം Files: You can now copy, paste, or move files from the CINESSD card to your computer's storage. For optimal performance, use drag-and-drop or copy-paste functions.
- സുരക്ഷിതമായി പുറത്താക്കുക: Before disconnecting the CINESSD Station, always safely eject the drive from your operating system to prevent data corruption.
- Remove CINESSD: After safely ejecting the drive, gently press the CINESSD card to release it from the slot, then pull it out.
കുറിപ്പ്: Data transfer speeds may vary depending on your computer's specifications and the type of USB port used.
7. പരിപാലനം
- വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the exterior of the station. Do not use liquid cleaners or solvents.
- സംഭരണം: Store the CINESSD Station in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- കൈകാര്യം ചെയ്യൽ: Handle the device with care to avoid physical damage.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Station not recognized by computer | Loose USB connection, faulty cable, CINESSD not inserted correctly, driver issue. |
|
| മന്ദഗതിയിലുള്ള ഡാറ്റ കൈമാറ്റ വേഗത | Using a USB 2.0 port, background processes, fragmented CINESSD. |
|
| CINESSD card not reading | Improper insertion, damaged CINESSD card. |
|
9 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | CINESSD Station (UG2 Version) |
| ബ്രാൻഡ് | ഡിജെഐ |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | DJI CINESSD, DJI Inspire 2 drone |
| ഹാർഡ്വെയർ ഇന്റർഫേസ് | Internal with removable media (CINESSD slot), USB 3.0 |
| ഉൽപ്പന്ന അളവുകൾ | 6.5 x 5.1 x 2.6 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 1.35 പൗണ്ട് |
| മൊത്തം USB പോർട്ടുകൾ | 3 |
| ASIN | B07R54XW6Z |
ചിത്രം 9.1: താഴെ view of the DJI CINESSD Station UG2, displaying regulatory markings, model number (PRIOGU3), and "MADE IN CHINA". This side also features heat dissipation fins.
10. വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please refer to the official DJI website or contact DJI customer service directly. Keep your proof of purchase for warranty claims.
ഓൺലൈൻ പിന്തുണ: സന്ദർശിക്കുക www.dji.com/support for FAQs, downloads, and contact information.
