ഉൽപ്പന്നം കഴിഞ്ഞുview
The Lepro RGB LED Strip Lights are designed to provide vibrant, color-changing illumination for various indoor applications. This 16.4ft (5m) flexible strip features 150 5050 SMD LEDs, offering primary Red, Green, Blue (RGB) colors, white, and 16 multicolored options. It comes with a 44-key IR remote controller and a 24V power adapter for easy plug-and-play setup. These lights are ideal for enhancing the ambiance of living rooms, bedrooms, dining rooms, kitchens, desks, cabinets, and are particularly suitable for holiday decorations.

Image: Complete kit of Lepro RGB LED Strip Lights, showing the coiled strip, remote control, and power supply.
Key features include ultra-high brightness, a wide range of color options with DIY customization, 8 lighting modes, and adjustable brightness levels. The strip utilizes strong 3M adhesive for easy installation, complemented by extra mounting brackets/fixing clips to ensure secure placement.

ചിത്രം: ഉദാamples of the LED strip lights installed in different home environments, such as behind a TV, under kitchen cabinets, and along a bar counter.
ബോക്സിൽ എന്താണുള്ളത്
- 1x 150 SMD 5050 LEDs 16.4ft/5m non-waterproof RGB strip
- 1x 44 key IR remote controller
- 1x 2A 12V power adapter (US Plug)
- Extra mounting brackets/fixing clips
സജ്ജീകരണ ഗൈഡ്
Follow these steps for proper installation of your LED strip lights:
- ഉപരിതലം തയ്യാറാക്കുക: Ensure the surface where you intend to install the strip lights is clean, dry, and smooth. Wipe it thoroughly to remove any dust or debris.
- സ്ട്രിപ്പ് പ്രയോഗിക്കുക: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, applying firm and even pressure along its entire length.
- Cut to Length (Optional): If the strip is too long for your application, you can cut it at designated cutting marks (usually indicated by a copper line and a scissor icon). Do not cut at any other point, as this may damage the strip.
- ക്ലിപ്പുകൾ ഉപയോഗിച്ച് സുരക്ഷിതമാക്കുക: For added security, especially on textured surfaces or in areas where the adhesive might weaken over time, use the provided fixing clips. Space them evenly along the strip and secure them with small screws or appropriate fasteners.
- പവർ ബന്ധിപ്പിക്കുക: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 12V power adapter. Plug the power adapter into a standard electrical outlet.

Image: Visual instructions demonstrating the installation process, from preparing the surface to securing the strip with clips.

Image: Detail showing the strong 3M adhesive on the back of the strip and the included fixing clips for enhanced stability.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Your Lepro RGB LED Strip Lights are controlled by the included 44-key IR remote. Ensure the remote is pointed directly at the IR receiver connected to the LED strip for optimal performance.

Image: The 44-key remote control, detailing its various functions for color selection, brightness adjustment, and mode changes.
വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ:
- പവർ ഓൺ/ഓഫ്: Use the red and green buttons at the top right to turn the lights on or off.
- തെളിച്ച ക്രമീകരണം: The two arrow buttons (up/down) below the power buttons control the brightness (5 levels available).
- സ്റ്റാറ്റിക് നിറങ്ങൾ: Select from 20 static colors using the color grid buttons.
- DIY നിറങ്ങൾ: Use the DIY1-DIY6 buttons to create and save your custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
- ഡൈനാമിക് മോഡുകൾ: Choose from 8 dynamic modes (e.g., Flash, Strobe, Fade, Smooth) using the buttons on the bottom right.
- വേഗത ക്രമീകരണം: For dynamic modes, use the 'QUICK' and 'SLOW' buttons to adjust the transition speed (5 levels available).
പരിപാലനവും പരിചരണവും
To ensure the longevity and optimal performance of your Lepro RGB LED Strip Lights, follow these maintenance guidelines:
- വൃത്തിയാക്കൽ: Gently wipe the LED strip with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
- ജല പ്രതിരോധം: ഈ ഉൽപ്പന്നം വെള്ളത്തെ പ്രതിരോധിക്കുന്നില്ല. Avoid exposing the LED strip, power adapter, or remote control to water or high humidity. Install only in indoor, dry environments.
- കൈകാര്യം ചെയ്യൽ: Do not bend the LED strip sharply or apply excessive force, as this can damage the internal circuitry.
- വൈദ്യുതി വിതരണം: Always use the original power adapter provided with the kit. Using an incompatible power supply may damage the lights or pose a safety risk.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your LED strip lights, refer to the following common solutions:
- ലൈറ്റുകൾ ഓണാക്കുന്നില്ല:
- Check all connections to ensure they are secure between the LED strip, IR receiver, and power adapter.
- Verify that the power adapter is properly plugged into a working electrical outlet.
- Ensure the remote control has working batteries and is pointed directly at the IR receiver.
- പ്രധാന നുറുങ്ങ്: If the lights are not working or not displaying colors correctly, ensure the 4-pin connector from the LED strip is inserted correctly into the IR receiver. Sometimes, the pins may be inserted backward. If this is the case, try unplugging and re-inserting the connector in the opposite orientation. After re-inserting, press the 'Blue' color button, then the 'Power' button, and then the 'Fade 7' button on the remote repeatedly until the lights function correctly.
- റിമോട്ട് പ്രതികരിക്കുന്നില്ല:
- റിമോട്ട് കൺട്രോളിൽ ബാറ്ററി മാറ്റിസ്ഥാപിക്കുക.
- Ensure there are no obstructions between the remote and the IR receiver.
- Colors Not Matching Remote:
- This can often be resolved by re-calibrating the remote. Try the 'Important Tip' mentioned above (Blue button, Power button, Fade 7 repeatedly).
ഉൽപ്പന്ന സവിശേഷതകൾ
| സ്പെസിഫിക്കേഷൻ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 410082-RGB-US |
| നിറം | RGB (ചുവപ്പ്, പച്ച, നീല) |
| ബ്രാൻഡ് | കുഷ്ഠരോഗം |
| ഇൻഡോർ/ഔട്ട്ഡോർ ഉപയോഗം | ഇൻഡോർ |
| പ്രത്യേക ഫീച്ചർ | Adjustable, Color Changing |
| പ്രകാശ സ്രോതസ്സ് തരം | എൽഇഡി |
| പവർ ഉറവിടം | കോർഡഡ് ഇലക്ട്രിക് |
| ഇളം നിറം | RGB |
| മെറ്റീരിയൽ | ചെമ്പ്, പ്ലാസ്റ്റിക് |
| കൺട്രോളർ തരം | റിമോട്ട് കൺട്രോൾ |
| കണക്റ്റിവിറ്റി ടെക്നോളജി | ഇൻഫ്രാറെഡ് |
| പ്രകാശ സ്രോതസ്സുകളുടെ എണ്ണം | 150 |
| വാല്യംtage | 12 വോൾട്ട് |
| വാട്ട്tage | 24 വാട്ട്സ് |
| ഇനത്തിൻ്റെ ഭാരം | 0.22 കിലോഗ്രാം (7.7 ഔൺസ്) |
| ഉൽപ്പന്ന അളവുകൾ | 5.43 x 5.51 x 2.8 ഇഞ്ച് |
| ജല പ്രതിരോധ നില | വാട്ടർ റെസിസ്റ്റൻ്റ് അല്ല |
| ബാറ്ററികൾ ആവശ്യമാണ് | 1 A battery (for remote) |
വാറൻ്റിയും പിന്തുണയും
Lepro products are designed for quality and reliability. For specific warranty information regarding your LED Strip Lights, please refer to the documentation included with your purchase or visit the official Lepro webസൈറ്റ്.
For further assistance, technical support, or to explore other Lepro products, please visit the ആമസോണിലെ ലെപ്രോ സ്റ്റോർ.





