SEBSON HF Motion Detector Instruction Manual

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON HF Motion Detector (Model 2_X_HF_CEIL_A). Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

ചിത്രം 1.1: മുൻഭാഗം view of the SEBSON HF Motion Detector. This image shows the circular, white casing of the motion detector, designed for discreet ceiling surface mounting.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

• ദേശീയ വയറിംഗ് ചട്ടങ്ങൾക്കനുസൃതമായി യോഗ്യതയുള്ള ഒരു ഇലക്ട്രീഷ്യനാണ് ഇൻസ്റ്റാളേഷൻ നടത്തേണ്ടത്.
• Disconnect power before installation or any maintenance.
• Do not exceed the maximum load capacity: 800W for incandescent lamps, 300W for LED or other energy-saving lamps.
• This device is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
• Ensure the mounting surface is stable and can support the device.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The SEBSON HF Motion Detector utilizes high-frequency (HF) technology to detect movement within its coverage area. It is designed for ceiling surface mounting and offers adjustable settings for optimal performance in various indoor environments.

പ്രധാന സവിശേഷതകൾ:

• High-Frequency Sensor: Detects movement through non-metallic objects like thin walls or doors.
• വിശാലമായ കവറേജ്: 360° detection angle with a range of 2 to 16 meters.
• ക്രമീകരിക്കാവുന്ന ക്രമീകരണങ്ങൾ: Time delay (10 seconds to 12 minutes), sensitivity (detection range), and ambient light threshold (3-2000 lux).
• LED അനുയോജ്യം: Supports up to 300W for LED lamps and 800W for incandescent lamps.
• കോംപാക്റ്റ് ഡിസൈൻ: Circular, white casing with dimensions of Ø100x22mm.

ചിത്രം 3.1: കഴിഞ്ഞുview of the motion detector highlighting its key specifications including detection range, LED compatibility, IP rating, time delay, lux range, and voltage.

4 സ്പെസിഫിക്കേഷനുകൾ

Image 4.1: Technical drawing showing the dimensions of the motion detector: 100mm diameter and 22mm height.

5. ഇൻസ്റ്റലേഷൻ (സജ്ജീകരണം)

പ്രധാനപ്പെട്ടത്: Ensure the main power supply is switched off before commencing installation.

1. ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a suitable indoor ceiling location for surface mounting. Avoid placing near heat sources, air conditioning vents, or areas with significant air movement, which can interfere with detection.
2. വയറിംഗ് തയ്യാറാക്കുക: സി തുറക്കുകasing of the motion detector. You will find terminals for Live (L), Neutral (N), and Switched Live (L').
3. മൗണ്ട് ബേസ്: Secure the base of the motion detector to the ceiling using appropriate screws and wall plugs. Ensure the cable entry points are aligned.
4. വയർ കണക്ഷനുകൾ:
   • Connect the incoming Live wire to the 'L' terminal.
   • Connect the incoming Neutral wire to the 'N' terminal.
   • Connect the Live wire to your light fixture (load) to the 'L'' terminal.
   • Connect the Neutral wire from your light fixture (load) to the 'N' terminal (shared with incoming neutral).
   

   ചിത്രം 5.1: പിൻഭാഗം view of the motion detector, illustrating the wiring terminals (L, N, L') and the three adjustable dials for TIME, SENS, and LUX settings.

5. അടയ്ക്കുക സിasing: Once wiring is complete and secure, reattach the main body of the detector to its base.
6. പവർ പുന ore സ്ഥാപിക്കുക: Switch on the main power supply. The detector will enter a warm-up period (typically 30-60 seconds) during which it may switch on and off randomly.

6. Operation and Settings Adjustment

The SEBSON HF Motion Detector features three adjustable dials to customize its operation:

• TIME (Time Delay): Controls how long the connected light remains on after the last detected movement.
  • 10 സെക്കൻഡ് മുതൽ 12 മിനിറ്റ് വരെ ക്രമീകരിക്കാവുന്നതാണ്.
  • Turn clockwise to increase the time delay, counter-clockwise to decrease.
• SENS (Sensitivity/Detection Range): Adjusts the detection range of the HF sensor.
  • Adjustable from 2 meters to 16 meters.
  • Turn clockwise for higher sensitivity (longer range), counter-clockwise for lower sensitivity (shorter range).
  • Consider the environment to avoid unwanted detections (e.g., through thin walls).
• LUX (Ambient Light Threshold): Determines the ambient light level at which the sensor will activate the connected light.
  • Adjustable from 3 lux (darkness) to 2000 lux (daylight).
  • Turn towards the sun icon for activation in brighter conditions (daylight).
  • Turn towards the moon icon for activation only in darker conditions (night).

ചിത്രം 6.1: വിശദമായ view of the three rotary dials on the motion detector, labeled TIME, SENS, and LUX, used for fine-tuning operational parameters.

Image 6.2: A diagram showing the 360° detection pattern and adjustable range (2-16m) from a ceiling mount, along with visual representations of the LUX, SENS, and TIME adjustment dials.

7. പരിപാലനം

The SEBSON HF Motion Detector requires minimal maintenance. Follow these guidelines:

• വൃത്തിയാക്കൽ: Gently wipe the surface of the detector with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
• പരിശോധന: സിയിൽ ദൃശ്യമായ എന്തെങ്കിലും കേടുപാടുകൾ ഉണ്ടോ എന്ന് ഇടയ്ക്കിടെ പരിശോധിക്കുക.asing or wiring. If any damage is found, disconnect power and consult a qualified electrician.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: Ensure the operating environment remains within the specified indoor conditions (IP20).

8. പ്രശ്‌നപരിഹാരം

9. വാറൻ്റിയും പിന്തുണയും

SEBSON products are manufactured with quality and reliability in mind. For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official SEBSON website. If you encounter any issues or require technical assistance, please contact SEBSON customer support through their official channels.

കൂടുതൽ വിവരങ്ങൾക്ക്, സന്ദർശിക്കുക: www.sebson.de