1. ആമുഖം
The ANTOP AT-800SBS HD Smart Panel Antenna is designed to receive free over-the-air (OTA) digital TV signals. This antenna features a Smart Boost System for adjustable amplification, dual connectivity for multiple devices, an integrated 4G LTE filter to block interference, and an FM antenna for radio reception. It supports both indoor and outdoor installation, providing a versatile solution for accessing local broadcasts.
2. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:
- ANTOP AT-800SBS Smart Panel Antenna
- Smart Boost System Power Booster with Adjustment Dial
- VHF Enhancer Rods (Detachable)
- എസി/ഡിസി പവർ അഡാപ്റ്റർ
- 40 അടി കോക്സിയൽ കേബിൾ
- 5 അടി കോക്സിയൽ കേബിൾ
- ഇൻഡോർ സ്റ്റാൻഡ്
- മതിൽ/പോൾ മൗണ്ടിംഗ് കിറ്റ്
Image 2.1: The ANTOP AT-800SBS antenna with its Smart Boost System, power adapter, coaxial cables, and indoor stand.
3 പ്രധാന സവിശേഷതകൾ
3.1 Smart Boost System with Adjustment Dial
The Smart Boost System allows for precise adjustment of the antenna's amplification strength. A built-in dial enables users to fine-tune reception from 0 to 85 miles, optimizing signal balance based on your specific location and signal conditions. This helps in achieving clear reception for various signal strengths.
Image 3.1: The Smart Boost System with its adjustable dial for reception power. Turning the dial clockwise increases gain, while counter-clockwise reduces it.
3.2 ഡ്യുവൽ കണക്റ്റിവിറ്റി
The antenna's Smart Boost System includes a secondary output, allowing simultaneous connection to a second device. This can be another TV, an FM stereo receiver, or any OTA-ready streaming device or projector, expanding your viewing and listening options.
3.3 Integrated 4G LTE Filter
Equipped with a built-in 4G LTE filter, the antenna shields against interference from 3G and 4G wireless signals. This ensures stable performance and helps prevent picture pixelation, contributing to a smooth and clear 4K HDTV experience.
Image 3.2: Illustration of the 4G LTE filter's effect, showing a clear image compared to a pixelated one caused by interference.
3.4 Integrated FM Antenna
The antenna also functions as an FM antenna, enabling reception of local radio stations. Connect the antenna to a radio or stereo receiver to enjoy FM broadcasts. It features a multi-directional reception pattern for broad signal capture.
3.5 Versatile Placement Options
The AT-800SBS is designed for flexible installation, suitable for indoor (tabletop or wall-mounted) or outdoor (wall or pole-mounted) use. Its aesthetic design allows it to blend with various home interior styles.
Image 3.3: The antenna positioned indoors, demonstrating its suitability for living room environments.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to set up your ANTOP AT-800SBS antenna:
- ഒരു ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Determine the best location for your antenna. Higher locations, such as a roof or attic for outdoor installation, or near a window for indoor use, generally provide better signal reception. Consider both indoor (using the included stand or wall mount) and outdoor (using the pole/wall mounting kit) options.
- Attach VHF Enhancer Rods: If desired, screw the two detachable VHF enhancer rods into the designated ports on the antenna for improved VHF signal reception.
- കോക്സിയൽ കേബിൾ ബന്ധിപ്പിക്കുക: Connect one end of the provided coaxial cable (40 ft. or 5 ft. depending on distance) to the ANTENNA IN port on the Smart Boost System.
- Connect to TV/Device: Connect the other end of the coaxial cable from the Smart Boost System's TV/FM/Device output to the ANT/IN or CABLE IN port on your TV or digital converter box. For dual connectivity, use the secondary output for a second device.
- പവർ അഡാപ്റ്റർ ബന്ധിപ്പിക്കുക: Plug the AC/DC power adapter into the DC 12V port on the Smart Boost System, then plug the adapter into a standard electrical outlet. The LED indicator on the Smart Boost System should illuminate.
Image 4.1: A diagram illustrating the connection of the antenna to the Smart Boost System and then to a television or other devices.
5. ഓപ്പറേഷൻ
After installation, follow these steps to operate your antenna:
- പവർ ഓൺ: Ensure the Smart Boost System is powered on and its LED indicator is lit.
- Adjust Signal Strength: Use the adjustment dial on the Smart Boost System to fine-tune the signal strength. Start with the dial at a lower setting and gradually increase it. Observe the signal quality on your TV.
- ചാനൽ സ്കാൻ നടത്തുക: Access your TV's menu and navigate to the 'Channel Scan' or 'Auto Program' function. Select 'Antenna' or 'Air' as the input source. Allow the TV to scan for available channels. This process may take several minutes.
- Optimize Placement and Adjustment: If initial results are unsatisfactory, try repositioning the antenna slightly or adjusting the Smart Boost System dial again, then re-scan for channels. Different orientations or heights can significantly impact reception.
- എഫ്എം റേഡിയോ സ്വീകരണം: To listen to FM radio, connect the antenna to your FM stereo receiver's antenna input. Perform a channel scan on your receiver to find available FM stations.
6. പരിപാലനം
To ensure optimal performance and longevity of your ANTOP AT-800SBS antenna:
- വൃത്തിയാക്കൽ: Periodically wipe the antenna and Smart Boost System with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- കണക്ഷൻ പരിശോധന: Regularly inspect all coaxial cable connections to ensure they are secure and free from corrosion. Loose connections can lead to signal loss.
- ഔട്ട്ഡോർ ഇൻസ്റ്റലേഷൻ: For outdoor installations, check mounting hardware periodically for stability, especially after severe weather conditions. Ensure cables are properly secured to prevent damage.
- പരിസ്ഥിതി സംരക്ഷണം: While designed for outdoor use, extreme weather conditions can affect performance. Ensure the antenna is installed according to guidelines to minimize exposure to direct impact from heavy rain or snow.
7. പ്രശ്നപരിഹാരം
If you experience issues with your antenna, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| സിഗ്നലോ ദുർബലമായ സിഗ്നലോ ഇല്ല | Incorrect antenna placement, loose connections, amplifier setting too low/high, TV not set to antenna input. |
|
| Pixelated or distorted picture | Weak signal, interference from 3G/4G devices, ampലൈഫയർ ക്രമീകരണം. |
|
| Cannot receive certain channels | Directional signal, local obstructions, weak signal for specific frequencies. |
|
| Smart Boost System LED is off | ശക്തിയില്ല ampജീവൻ. |
|
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | മുകളിൽ |
| മോഡൽ നമ്പർ | AT-800SBS (ANTAN-800SBS) |
| ഇനത്തിൻ്റെ ഭാരം | 8.13 പൗണ്ട് |
| പാക്കേജ് അളവുകൾ | 22.5 x 10.9 x 6.9 ഇഞ്ച് |
| നിറം | വെള്ള |
| പ്രതിരോധം | 75 ഓം |
| പരമാവധി പരിധി | 85 മൈൽ |
| ചാനലുകളുടെ എണ്ണം | 1 (refers to single antenna unit, not channel count received) |
| യു.പി.സി | 682604901183 |
| നിർമ്മാതാവ് | മുകളിൽ |
9. വാറൻ്റിയും പിന്തുണയും
ANTOP is committed to providing quality products and customer satisfaction.
- ആക്സസറി മാറ്റിസ്ഥാപിക്കൽ: ANTOP offers free replacement of accessories such as the Power Booster, VHF Signal Enhancer Rods, AC/DC Power Adapter, and coaxial cables.
- വാറൻ്റി വിവരങ്ങൾ: For detailed warranty terms and conditions, please refer to the product packaging or contact ANTOP customer support directly.
- ഉപഭോക്തൃ പിന്തുണ: For any questions, technical assistance, or support needs, please contact ANTOP US support. Contact information can be found on the product packaging.
Image 9.1: ANTOP provides customer support and offers free replacement of certain accessories.
