1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The CURT 11567 Class 1 Trailer Hitch is designed for specific Toyota Corolla and C-HR models, providing a reliable towing solution. This hitch features a 1-1/4-inch receiver, suitable for various towing applications within its weight limits. It is constructed from durable carbon steel with a dual-coat finish for enhanced protection against corrosion.
Image 1.1: The CURT 11567 Class 1 Trailer Hitch, showcasing its robust construction and black powder coat finish.
പ്രധാന സവിശേഷതകൾ:
- ആശ്രയിക്കാവുന്ന ശക്തി: Rated for 2,000 lbs. gross trailer weight (GTW) and 200 lbs. tongue weight (TW), limited by the lowest-rated towing component.
- Versatile Receiver: Features a standard 1-1/4-inch receiver hitch. Note: Not compatible with vertical hanging bike racks.
- ഡ്യുവൽ-കോട്ട് ഫിനിഷ്: Submersed in a liquid A-coat and co-cured with a durable black powder coat for superior rust, chip, and UV resistance.
- എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Designed for a factory fit on select Toyota Corolla and C-HR model years.
- സുരക്ഷാ പരീക്ഷിച്ചു: Each design is thoroughly tested to SAE J684 specifications using real vehicles in real-world conditions.
2 സ്പെസിഫിക്കേഷനുകൾ
| സ്പെസിഫിക്കേഷൻ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 11567 |
| റിസീവർ ട്യൂബ് വലുപ്പം | 1-1/4 ഇഞ്ച് |
| മൊത്തം ട്രെയിലർ ഭാരം (GTW) | 2,000 പൗണ്ട് |
| നാവിന്റെ ഭാരം (TW) | 200 പൗണ്ട് |
| മെറ്റീരിയൽ | കാർബൺ സ്റ്റീൽ |
| ഫിനിഷ് തരം | ഗ്ലോസ് ബ്ലാക്ക് പൗഡർ കോട്ട് |
| ഇനത്തിൻ്റെ ഭാരം | 30 പൗണ്ട് |
| ഉൽപ്പന്ന അളവുകൾ | 45 x 13 x 10 ഇഞ്ച് |
| വാഹന സേവന തരം | Car, Marine-Personal-Craft, Trailer |
Image 2.1: Diagram illustrating the 1-1/4 inch receiver tube size.
3. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്
Installation of the CURT 11567 trailer hitch is designed to be vehicle-specific and may require removal of certain vehicle components. While some users may perform the installation themselves, professional installation is recommended to ensure proper fitment and safety.
പൊതു ഇൻസ്റ്റാളേഷൻ ഘട്ടങ്ങൾ:
- തയ്യാറാക്കൽ: Park the vehicle on a level surface and engage the parking brake. Refer to your vehicle's owner's manual for specific instructions on accessing the installation area, which may involve removing the rear fascia or bumper beam.
- സ്ഥാനനിർണ്ണയം: Carefully position the trailer hitch according to the vehicle's frame. The CURT 11567 is designed for a factory fit and typically requires no drilling.
Image 3.1: Graphic indicating that no drilling is required for the installation of this hitch.
- Securing the Hitch: Attach the hitch to the vehicle frame using the provided hardware. Ensure all bolts are correctly aligned before tightening to prevent cross-threading. Torque all fasteners to the specifications provided in the detailed installation instructions that accompany the product.
- പുനഃസംയോജനം: Reinstall any vehicle components that were removed. When reassembling, consider future access to components behind the bumper beam, as the hitch's placement may affect this.
Safety Note: Always refer to the specific installation instructions included with your CURT 11567 hitch for detailed, step-by-step guidance and torque specifications. Incorrect installation can lead to product failure and safety hazards.
Image 3.2: A technician using a scanning arm to ensure precise vehicle measurements for hitch design and fitment.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once installed, the CURT 11567 Class 1 Trailer Hitch allows for the attachment of various towing accessories, such as ball mounts, cargo carriers, or bike racks, provided they are compatible with a 1-1/4-inch receiver and do not exceed the hitch's weight capacity.
Connecting a Trailer or Accessory:
- ആക്സസറി ചേർക്കുക: Slide the shank of your chosen accessory (e.g., ball mount) into the 1-1/4-inch receiver tube.
- Secure with Pin: Align the pin hole on the accessory shank with the corresponding hole on the hitch receiver. Insert a hitch pin and secure it with a clip or lock.
- സുരക്ഷാ ശൃംഖലകൾ ഘടിപ്പിക്കുക: If towing a trailer, always attach the trailer's safety chains to the designated chain loops on the hitch. Cross the chains under the trailer tongue to prevent it from dropping to the ground if it separates from the hitch.
- കണക്ഷനുകൾ പരിശോധിക്കുക: Before driving, ensure all connections are secure, including the hitch pin, safety chains, and any electrical connections for trailer lights.
ചിത്രം 4.1: ക്ലോസ്-അപ്പ് view of the standard hitch receiver with safety chains properly attached to the designated loops.
Image 4.2: A CURT trailer hitch installed on a vehicle, with a ball mount and safety chains connected, ready for towing.
Important: Never exceed the stated gross trailer weight (2,000 lbs) or tongue weight (200 lbs) of this hitch, or the towing capacity of your vehicle, whichever is lower.
5. പരിപാലനം
നിങ്ങളുടെ CURT ട്രെയിലർ ഹിച്ചിന്റെ ദീർഘായുസ്സും സുരക്ഷിതമായ പ്രവർത്തനവും പതിവ് അറ്റകുറ്റപ്പണികൾ ഉറപ്പാക്കുന്നു.
പരിപാലന നുറുങ്ങുകൾ:
- പതിവ് പരിശോധന: Periodically inspect the hitch for any signs of wear, damage, or corrosion, especially after heavy use or exposure to harsh weather conditions. Check all bolts and fasteners for tightness.
- വൃത്തിയാക്കൽ: Clean the hitch regularly with mild soap and water to remove dirt, salt, and road grime. Rinse thoroughly and dry.
- നാശ സംരക്ഷണം: The hitch features a dual-coat finish for excellent corrosion resistance. However, if any scratches or chips occur, touch up the affected areas with a rust-inhibiting paint to prevent further corrosion.
- Receiver Tube Care: Keep the inside of the receiver tube clean and free of debris. A light coat of grease can be applied to the inside of the receiver tube to prevent rust and ease accessory insertion.
Image 5.1: Components of the CURT hitch undergoing the dual-coat finishing process, which provides enhanced durability and corrosion resistance.
6. പ്രശ്നപരിഹാരം
This section addresses common issues that may arise with your trailer hitch.
പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും:
- Difficulty with Installation/Fitment:
- Ensure the hitch model is correct for your specific vehicle year and model.
- Verify that all vehicle components (e.g., bumper fascia) are properly aligned before attempting to install the hitch.
- If bolts are difficult to thread, ensure they are correctly aligned and not cross-threading. Do not force bolts.
- Consider professional installation if you encounter significant difficulties.
- Rattling or Noise:
- Check all mounting bolts for proper tightness.
- Ensure the hitch pin and clip are securely in place.
- If using an accessory, ensure it fits snugly in the receiver. Anti-rattle devices can be used to reduce movement between the receiver and accessory.
- Inspect any wire harness clips or other components that may have been dislodged during installation and secure them.
- നാശം:
- Refer to the maintenance section for tips on cleaning and touching up the finish.
7. വാറൻ്റിയും പിന്തുണയും
For information regarding the product warranty, please refer to the official CURT website or the warranty documentation included with your purchase. For technical support or further assistance, contact CURT customer service directly.
നിർമ്മാതാവ്: CURT
Webസൈറ്റ്: www.curtmfg.com
