ടെക്നിക് ഷെവർലെ കോർവെറ്റ് ZR1 (ലെഗോ 42093)-നുള്ള BRIKSMAX LED ലൈറ്റിംഗ് കിറ്റ് - ഉപയോക്തൃ മാനുവൽ

ആമുഖം

This user manual provides comprehensive instructions for installing, operating, and maintaining your BRIKSMAX LED Lighting Kit designed specifically for the Lego Technic Chevrolet Corvette ZR1 (Lego Set 42093). This kit enhances your model with realistic lighting effects, bringing it to life. Please read all instructions carefully before beginning installation.

The Lego Technic Chevrolet Corvette ZR1 model illuminated with the BRIKSMAX LED Lighting Kit.

സുരക്ഷാ വിവരങ്ങൾ

• This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
• Keep all components away from water and excessive heat.
• Do not attempt to modify or disassemble the LED lights or wires, as this may damage the product and void the warranty.
• Ensure proper battery installation (polarity) to prevent damage to the battery holder or lights.
• ഏതെങ്കിലും അറ്റകുറ്റപ്പണികൾ അല്ലെങ്കിൽ ക്രമീകരണങ്ങൾ നടത്തുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും വൈദ്യുതി വിച്ഛേദിക്കുക.

പാക്കേജ് ഉള്ളടക്കം

Before beginning installation, please verify that all components listed below are included in your BRIKSMAX LED Lighting Kit package. The Lego model itself is not included.

Visual representation of the components included in the BRIKSMAX LED Lighting Kit.

• 2 x 30cm White Dot Lights
• 4 x 15cm Blue Dot Lights
• 4 x 30cm Red Dot Lights
• 1 x Warm White Strip Light
• 1 x 15cm കണക്റ്റിംഗ് കേബിളുകൾ
• 1 x AA Battery Holder (Batteries not included)
• 1 x പശ ചതുരങ്ങൾ
• 1 x 30cm USB Power Cable
• 1 x 12-port Expansion Boards
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

Follow these steps carefully to install the LED lighting kit onto your Lego Technic Chevrolet Corvette ZR1 (42093) model. It is recommended to have the original Lego instruction manual handy for reference during disassembly and reassembly.

1. Preparing Your Model

Before installing the lights, identify the sections of your Lego model where the lights will be placed. This kit is designed to integrate seamlessly, often requiring partial disassembly of certain sections of the model to route wires and secure lights. Refer to the detailed step-by-step instruction guide provided in your kit for specific disassembly and reassembly steps.

The visual impact of the lighting kit on the Lego Corvette ZR1 model.

2. ലൈറ്റുകൾ ബന്ധിപ്പിക്കുന്നു

Each light component (dot lights, strip lights) has a small connector. These connectors plug into the expansion boards. The expansion boards then connect to the battery holder or USB power cable. Ensure all connections are firm but do not force them.

• ഹെഡ്ലൈറ്റുകൾ: Use the white dot lights for the front headlights. Carefully route the wires through the existing gaps in the Lego bricks.
• Taillights: The red dot lights are for the rear taillights.
• Interior/Cabin Light: The warm white strip light is typically used for the interior cabin, providing ambient illumination.
• Underbody/Accent Lights: The blue dot lights can be used for underbody lighting or other accent areas as desired.
• വയർ മാനേജ്മെൻ്റ്: Use the adhesive squares to secure wires discreetly within the model, preventing them from being pinched or visible.

വിശദമായി view of the illuminated front section of the model.

The rear of the model showcasing the red taillights and blue accent lighting.

The interior of the Corvette model illuminated by the warm white strip light.

3. പവർ കണക്ഷൻ

The kit can be powered using either the AA battery holder (requires 3x AA batteries, not included) or the USB power cable. Connect your chosen power source to the main expansion board.

ഇൻസ്റ്റലേഷൻ പ്രക്രിയയെക്കുറിച്ചുള്ള ഒരു വിഷ്വൽ ഗൈഡിന്, ദയവായി താഴെയുള്ള ഔദ്യോഗിക ഉൽപ്പന്ന വീഡിയോ പരിശോധിക്കുക:

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the lighting kit is fully installed and connected to a power source:

• If using the battery holder, ensure batteries are correctly inserted and the switch on the battery holder is in the "ON" position.
• If using the USB power cable, connect it to a compatible USB power source (e.g., USB wall adapter, power bank, computer USB port). The lights should illuminate automatically.
• To turn off the lights, either switch the battery holder to "OFF" or disconnect the USB power cable.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to gently wipe dust from the LED lights and wires. Avoid using liquid cleaners directly on the electronic components.
• സംഭരണം: When not in use for extended periods, disconnect the power source (remove batteries or unplug USB cable) to prevent battery drain or potential damage. Store the model in a cool, dry place away from direct sunlight.
• വയർ സമഗ്രത: Periodically check wires for any signs of wear, pinching, or damage. Ensure they are securely routed and not under tension.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

BRIKSMAX offers customer support for their products. If you encounter any difficulties with your product, including missing parts or technical issues, please contact the manufacturer directly.

• ബന്ധപ്പെടുക: Refer to the contact information provided in your kit's packaging or visit the official BRIKSMAX store on Amazon.
• വാറൻ്റി: നിർദ്ദിഷ്ട വാറന്റി വിശദാംശങ്ങൾ വ്യത്യാസപ്പെടാം. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
• റിട്ടേണുകൾ: This product is eligible for a 30-day refund/replacement return policy through Amazon.

കൂടുതൽ സഹായത്തിന്, നിങ്ങൾക്ക് സന്ദർശിക്കാവുന്നതാണ് ആമസോണിലെ BRIKSMAX സ്റ്റോർ.