SKYRC GSM-015 GNSS GPS സ്പീഡ് മീറ്റർ ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

The SKYRC GSM-015 GNSS GPS Speed Meter is a high-precision device designed for measuring speed, altitude, and other flight parameters for various remote-controlled vehicles, including RC drones, FPV systems, multirotors, quadcopters, airplanes, and helicopters. This manual provides comprehensive instructions for the setup, operation, and maintenance of your GSM-015 device.

ചിത്രം 1: മുൻഭാഗം view of the SKYRC GSM-015 GNSS GPS Speed Meter, displaying its screen and controls.

2. സവിശേഷതകൾ

The SKYRC GSM-015 offers a range of advanced features for precise data acquisition:

• Measures Top Speed, Average Speed, and Top Altitude.
• Concurrent reception of both GPS and GLONASS satellite systems for enhanced accuracy.
• Functions as a GNSS Coordinator.
• Adjustable update frequency up to 10Hz for more accurate data.
• Built-in 1MB flash memory, capable of recording data for up to 2 hours at 10Hz or 18 hours at 1Hz.
• UTC സമയംamp logged for each track point.
• Integrated rechargeable 200mAh LiPo battery, providing approximately 150 minutes of operating time.
• Allows switching between Metric and Imperial units of measurement.
• Compatible with GNSS LOGGER software for device management and data logging, viewable on Bing Maps.
• Firmware upgradeable for future enhancements.

Figure 2: The GSM-015 supports GNSS (Global Navigation Satellite System) with both GPS and GLONASS, improving positional accuracy by tracking two satellite constellations.

Figure 3: The device features built-in 1MB memory and an update frequency up to 10Hz. Higher update frequencies provide more accurate data. When memory is full, previous records are automatically replaced.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജ് തുറക്കുമ്പോൾ, എല്ലാ ഇനങ്ങളും നിലവിലുണ്ടെന്നും നല്ല നിലയിലാണെന്നും ദയവായി പരിശോധിക്കുക:

• 1 x SKYRC GSM-015 GNSS Speed Meter
• 1 x USB ചാർജിംഗ് കേബിൾ
• 1 x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

4. സജ്ജീകരണം

4.1 ഉപകരണം ചാർജ് ചെയ്യുന്നു

Before initial use, fully charge the built-in LiPo battery. Connect the device to a USB power source (e.g., computer USB port, USB wall adapter) using the provided micro USB cable.

Figure 4: The micro USB charging port allows convenient connection to a USB power source for charging.

4.2 പവർ ഓൺ/ഓഫ്

To power on the device, press and hold the 'ON/OFF' button located on the side. To power off, press and hold the 'ON/OFF' button again until the display turns off.

4.3 Satellite Acquisition

For accurate readings, ensure the device has a clear view of the sky to acquire satellite signals. The satellite signal strength indicator on the display will show the connection status.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 Viewഡാറ്റ

The device's screen displays various data points such as current speed, peak speed, average speed, altitude, total mileage/kilometer, longitude, and latitude. Use the 'MODE' button to cycle through different display modes and view ആവശ്യമുള്ള വിവരങ്ങൾ.

Figure 5: The user can easily view data such as speed, altitude, and total mileage on the screen. The device records top speed and top altitude for instant recall.

5.2 അളവെടുപ്പ് യൂണിറ്റുകൾ മാറ്റുന്നു

To switch between Metric (e.g., km/h) and Imperial (e.g., mph) systems of measurement, hold and press the 'MODE' button. The display will update to reflect the selected unit.

Figure 6: The device supports both Metric and Imperial systems of measurement, which can be easily switched by holding the MODE button.

5.3 റെക്കോർഡിംഗ് ഡാറ്റ

The device automatically logs data to its built-in 1MB flash memory. The recording time depends on the selected update frequency. When the memory is full, the oldest data will be overwritten by new data.

6. Data Management with GNSS LOGGER Software

The GNSS LOGGER software allows for advanced device management and data analysis. It is compatible with Windows 7 and above, and macOS 10.12 and above.

6.1 സോഫ്റ്റ്വെയർ പ്രവർത്തനങ്ങൾ

With the GNSS LOGGER software, you can perform the following actions:

• Transfer log data from the device to your computer.
• Display track data on built-in globally accessible Bing Maps.
• Save log data to your computer.
• Select the software language (English and Chinese).
• Change the device's time zone.
• Adjust the GNSS update rate.
• Perform firmware upgrades.

Figure 7: The GNSS LOGGER software facilitates data transfer and management, allowing users to analyze performance data on a computer.

7. പരിപാലനം

7.1 ബാറ്ററി കെയർ

The device uses a built-in rechargeable LiPo battery. To prolong battery life, avoid fully discharging the battery frequently and store the device with a partial charge if not used for extended periods. Do not expose the battery to extreme temperatures.

Figure 8: The device features a built-in rechargeable LiPo battery with a capacity of 200mAh, offering up to 150 minutes of operation.

7.2 വൃത്തിയാക്കലും സംഭരണവും

Clean the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials. Store the device in a cool, dry place within the recommended storage temperature range of -10°C to 70°C and operating humidity of 5% to 90%.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your SKYRC GSM-015, consider the following:

• No Satellite Signal: ഉപകരണത്തിന് വ്യക്തമായ, തടസ്സമില്ലാത്ത ഒരു വാതിൽ ഉണ്ടെന്ന് ഉറപ്പാക്കുക. view of the sky. Move away from tall buildings or dense foliage.
• തെറ്റായ സമയ പ്രദർശനം: Connect the device to the GNSS LOGGER software and verify the time zone settings.
• സോഫ്റ്റ്‌വെയർ കണക്ഷൻ പ്രശ്നങ്ങൾ: Ensure the USB cable is securely connected and that the GNSS LOGGER software is installed correctly and is compatible with your operating system. Try restarting both the device and your computer.
• Battery Cover Loose: Some users have noted the battery cover can be loose. Ensure it is properly secured. If persistent, a small piece of tape can help.

For persistent issues not resolved by these steps, please contact SKYRC customer support.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

വാറന്റി വിവരങ്ങൾക്കും സാങ്കേതിക പിന്തുണയ്ക്കും, ദയവായി ഔദ്യോഗിക SKYRC കാണുക. website or contact your authorized dealer. Keep your proof of purchase for any warranty claims.