hykolity 4 Pack Linkable LED Shop Light Instruction Manual

1. ആമുഖം

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your hykolity 4 Pack Linkable LED Shop Lights. Please read this manual thoroughly before installation and retain it for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

• ഇൻസ്റ്റാളേഷൻ, അറ്റകുറ്റപ്പണി അല്ലെങ്കിൽ വൃത്തിയാക്കൽ എന്നിവയ്ക്ക് മുമ്പ് എല്ലായ്പ്പോഴും വൈദ്യുതി വിച്ഛേദിക്കുക.
• വൈദ്യുതി വിതരണം വോളിയം ഉറപ്പാക്കുകtage is compatible with the fixture's requirements (100-277VAC).
• ഫിക്സ്ചർ പരിഷ്കരിക്കാനോ ഡിസ്അസംബ്ലിംഗ് ചെയ്യാനോ ശ്രമിക്കരുത്. ഉള്ളിൽ ഉപയോക്തൃ-സേവനയോഗ്യമായ ഭാഗങ്ങളില്ല.
• Avoid looking directly into the LED light source when illuminated, as it may cause eye strain.
• This fixture is designed for indoor use only and is not water-resistant.
• കത്തുന്ന വസ്തുക്കളിൽ നിന്ന് അകറ്റി നിർത്തുക.
• If any damage occurs to the fixture or wiring, discontinue use immediately and contact qualified personnel.

3. പാക്കേജ് ഉള്ളടക്കം

Each hykolity 4 Pack Linkable LED Shop Light package includes the following components:

• 4 x 4FT LED Shop Lights (42W, 4400lm, 5000K Daylight)
• 4 x 59-inch Power Cords with On/Off Switch
• Hanging Chains (for each light)
• J-Hooks (for hanging installation)
• Mounting Screws (for surface mount installation)
• Plastic Anchors (for drywall surface mount)
• Mounting Brackets (for surface mount installation)

4 സ്പെസിഫിക്കേഷനുകൾ

5. ഇൻസ്റ്റലേഷൻ

The hykolity LED Shop Lights offer versatile installation options: hanging mount or surface mount.

5.1. ഹാംഗിംഗ് മൗണ്ട്

1. Determine the desired hanging location and mark the positions for the J-hooks. Ensure the hooks are securely fastened into a ceiling joist or appropriate anchor point.
2. Attach the hanging chains to the J-hooks.
3. Connect the chains to the mounting points on the LED shop light fixture. Adjust chain length to achieve the desired height.

5.2. ഉപരിതല മൗണ്ട്

1. Mark the desired mounting locations on the ceiling or wall.
2. If mounting to drywall, drill pilot holes and insert the plastic anchors. For wood surfaces, drill pilot holes directly.
3. Secure the mounting brackets to the surface using the provided mounting screws.
4. Align the LED shop light fixture with the installed mounting brackets and snap it into place.

5.3. Linking Multiple Lights

These LED shop lights are designed to be linkable, allowing you to connect up to 6 units together for extended lighting coverage.

1. Install the first light fixture as either a hanging or surface mount.
2. Connect the power cord of the first light to a standard electrical outlet.
3. For subsequent lights, use the integrated linking connectors on the ends of the fixtures to create a continuous chain. Ensure secure connections.
4. Only one power cord is needed for a linked series of up to 6 lights.

6. ഓപ്പറേഷൻ

Once installed and connected to a power source, operate the hykolity LED Shop Light using the integrated on/off switch located on the power cord. For linked units, a single switch will control all connected lights.

7. പരിപാലനം

These LED shop lights are designed for long-lasting performance with minimal maintenance.

• വൃത്തിയാക്കൽ: Ensure the fixture is off and cool before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• പരിശോധന: Periodically check the mounting hardware and electrical connections to ensure they are secure.
• ബൾബ് മാറ്റിസ്ഥാപിക്കൽ: The LED light source is integrated and not user-replaceable. The fixture has a lifespan of up to 50,000 hours.

8. പ്രശ്‌നപരിഹാരം

8.1. Light Does Not Turn On

• പ്രവർത്തിക്കുന്ന ഒരു ഇലക്ട്രിക്കൽ ഔട്ട്‌ലെറ്റിൽ പവർ കോർഡ് സുരക്ഷിതമായി പ്ലഗ് ചെയ്തിട്ടുണ്ടോ എന്ന് പരിശോധിക്കുക.
• Ensure the on/off switch on the power cord is in the 'ON' position.
• Verify that the electrical outlet is receiving power by testing it with another device.
• For linked lights, ensure all connections between fixtures are secure.

8.2. Light Flickers

• പവർ സപ്ലൈ സ്ഥിരതയുള്ളതാണെന്നും നിർദ്ദിഷ്ട വോള്യത്തിനുള്ളിൽ ഉണ്ടെന്നും ഉറപ്പാക്കുക.tagഇ ശ്രേണി (100-277VAC).
• Check for loose connections in the power cord or between linked fixtures.
• If flickering persists, try plugging the light into a different outlet to rule out electrical supply issues.

9. വാറൻ്റിയും പിന്തുണയും

hykolity confidently guarantees all shop lights for 5 years from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact hykolity customer service. Keep your purchase receipt as proof of purchase.