GYSFLASH 30.12 PL Smart Charger User Manual

1. ആമുഖം

Welcome to the user manual for the GYSFLASH 30.12 PL, a versatile smart charger designed for 12V lead-acid and lithium iron phosphate (LiFePO4) batteries. This manual provides essential information for safe and effective operation, setup, and maintenance of your charger. Please read this manual thoroughly before using the device.

2. പ്രധാന സുരക്ഷാ നിർദ്ദേശങ്ങൾ

To ensure safe operation and prevent damage to the charger or battery, observe the following safety precautions:

• Always read the entire instruction manual before operating the charger.
• Ensure adequate ventilation during charging to prevent heat buildup.
• Avoid short-circuiting the charging clamps.
• The charger is equipped with reverse polarity protection; however, always connect the red (+) clamp to the positive (+) terminal and the black (-) clamp നെഗറ്റീവ് (-) ടെർമിനലിലേക്ക്.
• Disconnect the charger from the mains power before connecting or disconnecting the battery clamps.
• ചാർജർ മഴയിലോ അമിതമായ ഈർപ്പത്തിലോ തുറന്നുകാട്ടരുത്.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• റീചാർജ് ചെയ്യാത്ത ബാറ്ററികൾ ചാർജ് ചെയ്യാൻ ശ്രമിക്കരുത്.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The GYSFLASH 30.12 PL is a high-power, auto-sensing battery support unit with advanced features for various battery types and applications.

പ്രധാന സവിശേഷതകൾ:

• Double Technology: Compatible with both 12V lead-acid (GEL, AGM, liquid, calcium) and lithium iron phosphate (LiFePO4) batteries.
• ഉയർന്ന പവർ ഔട്ട്പുട്ട്: Delivers a continuous 30 A at 100% duty cycle (40°C).
• Three Charging Currents: Selectable charging currents of 7 A, 15 A, and 30 A to match battery capacity.
• ഷോറൂം മോഡ്: Provides a stable power supply of up to 30A for maintaining battery charge in exhibited vehicles or during diagnostic procedures.
• വിതരണ രീതി: Offers a stable on-board power supply, useful for maintaining vehicle electronics during battery changes or software updates.
• Wide Battery Capacity Range: Charges 12V lead-acid batteries from 15 Ah to 375 Ah and LiFePO4 batteries from 7 Ah to 375 Ah.
• മെമ്മറി ബാക്കപ്പ്: Retains vehicle memory information during battery removal.
• Optimized Battery Retention: Can remain connected to the battery during hibernation with an auto-restart function in case of power failure.
• കുറഞ്ഞ വോളിയംtagഇ ചാർജിംഗ്: Capable of initiating charging for batteries as low as 2 V.

Figure 1: Front panel of the GYSFLASH 30.12 PL charger, displaying mode selection, battery type indicators, and charging current options.

4. സജ്ജീകരണവും കണക്ഷനും

4.1 അൺപാക്കിംഗ്

Carefully unpack the GYSFLASH 30.12 PL charger and inspect for any visible damage. Retain the packaging for future storage or transport.

4.2 ബാറ്ററിയുമായി ബന്ധിപ്പിക്കുന്നു

1. Ensure the charger's power cord is disconnected from the mains power outlet.
2. ബന്ധിപ്പിക്കുക ചുവപ്പ് (+) ചാർജിംഗ് clamp സുരക്ഷിതമായി പോസിറ്റീവ് (+) ബാറ്ററിയുടെ ടെർമിനൽ.
3. ബന്ധിപ്പിക്കുക കറുപ്പ് (-) ചാർജിംഗ് clamp സുരക്ഷിതമായി നെഗറ്റീവ് (-) ബാറ്ററിയുടെ ടെർമിനൽ.
4. Verify that both connections are firm and free from corrosion.

4.3 Connecting to Mains Power

ഒരിക്കൽ ബാറ്ററി clamps are securely connected, plug the charger's power cord into a suitable 230V AC, 50/60Hz power outlet.

Figure 2: GYSFLASH 30.12 PL connected to a vehicle battery for charging or support.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 ഓട്ടോമാറ്റിക് ചാർജിംഗ്

The GYSFLASH 30.12 PL features an integrated temperature sensor that automatically adjusts charging parameters based on the ambient temperature, optimizing charging efficiency and battery life.

5.2 മോഡ് തിരഞ്ഞെടുക്കൽ

ഉപയോഗിക്കുക "MODE" button on the charger's front panel to select the appropriate charging program for your battery type:

• Pb (Lead-Acid): Select this mode for 12V lead-acid batteries, including GEL, AGM, liquid, and calcium types. Suitable for capacities from 15 Ah to 375 Ah.
• LiFePO4 (Lithium Iron Phosphate): Select this mode for 12V lithium iron phosphate batteries. Suitable for capacities from 7 Ah to 375 Ah.

5.3 Charging Current Selection

After selecting the battery type, choose one of the three available charging currents (7 A, 15 A, or 30 A) based on the battery's capacity and desired charging speed. Higher currents charge faster but should be appropriate for the battery's specifications.

5.4 ഷോറൂം മോഡ്

This mode is designed to provide a stable power supply of up to 30A. It is ideal for maintaining the battery charge in vehicles displayed in showrooms or during diagnostic procedures, preventing battery drain without overcharging.

5.5 സപ്ലൈ മോഡ്

The Supply Mode provides a stable on-board power supply to the vehicle's electrical system. This is particularly useful for maintaining power to vehicle electronics when the battery is being changed or during software updates, preventing loss of settings or data.

6. ചാർജിംഗ് പ്രക്രിയ

1. Connect the charger to the battery terminals, ensuring correct polarity (red to positive, black to negative).
2. Plug the charger's power cord into a mains power outlet.
3. അമർത്തുക "MODE" button to select the appropriate battery type (Pb for lead-acid or LiFePO4 for lithium).
4. Select the desired charging current (7 A, 15 A, or 30 A) based on your battery's requirements.
5. The charger will automatically begin the charging cycle. Monitor the progress indicators on the display.
6. Once the charging cycle is complete, first disconnect the charger from the mains power outlet.
7. പിന്നെ, കറുത്ത (-) cl വിച്ഛേദിക്കുക.amp ബാറ്ററിയിൽ നിന്ന്, തുടർന്ന് ചുവപ്പ് (+) clamp.

7. പരിപാലനം

• Keep the charger clean and dry. Wipe the casinഗ്രാം വിത്ത് എ സോഫ്റ്റ്, ഡിamp തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളോ ഉപയോഗിക്കരുത്.
• Store the charger in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
• Do not attempt to open the charger casing or perform any internal repairs. Refer all servicing to qualified personnel.
• ചാർജിംഗ് കേബിളുകളും ക്ലീനറുകളും പതിവായി പരിശോധിക്കുക.amps for any signs of damage, wear, or corrosion. Replace damaged components immediately.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your GYSFLASH 30.12 PL, refer to the table below for common problems and solutions.

9 സാങ്കേതിക സവിശേഷതകൾ

10. വാറൻ്റിയും പിന്തുണയും

The GYSFLASH 30.12 PL is covered by a 2 വർഷത്തെ ലോക്കൽ വാറന്റി. For technical assistance, warranty claims, or service inquiries, please contact your authorized GYS dealer or the official GYS support center. Please retain your proof of purchase for warranty validation.

For additional information and resources, please visit the official GYS webസൈറ്റ്.