Basic GC-7310P-2

അടിസ്ഥാന GC-7310P-2 3-ബേണർ ഗ്യാസ് സ്റ്റൗ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

Model: GC-7310P-2

1 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

ഉപകരണം ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ നിർദ്ദേശങ്ങളും ശ്രദ്ധാപൂർവ്വം വായിക്കുക. ഭാവിയിലെ റഫറൻസിനായി ഈ മാനുവൽ സൂക്ഷിക്കുക.

  • Ensure proper ventilation when operating the gas stove.
  • തീപിടിക്കുന്ന വസ്തുക്കൾ ഉപകരണത്തിന് സമീപം സൂക്ഷിക്കരുത്.
  • Keep children and pets away from the stove during operation.
  • എല്ലായ്പ്പോഴും ഉചിതമായ കുക്ക്വെയർ ഉപയോഗിക്കുക.
  • Turn off all burners and the gas supply when not in use.
  • ഗ്യാസ് മണക്കുന്നുണ്ടെങ്കിൽ ഉടൻ തന്നെ ഗ്യാസ് വിതരണം ഓഫ് ചെയ്യുക, ജനാലകൾ തുറക്കുക, ഇലക്ട്രിക്കൽ സ്വിച്ചുകളൊന്നും പ്രവർത്തിപ്പിക്കരുത്. യോഗ്യതയുള്ള ഒരു ടെക്നീഷ്യനെ ബന്ധപ്പെടുക.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Basic GC-7310P-2 is a 3-burner gas stove designed for countertop use. It features a stainless steel construction for durability and ease of cleaning.

Basic GC-7310P-2 3-Burner Gas Stove

ചിത്രം 1: ഫ്രണ്ട് view of the Basic GC-7310P-2 3-burner gas stove, showing the three burners and control knobs.

ഘടകങ്ങൾ:

  • Burners (3): Gas outlets for cooking.
  • പാൻ സപ്പോർട്ടുകൾ: Removable grates to hold cookware.
  • Control Knobs (3): Adjust flame intensity for each burner.
  • ഗ്യാസ് ഇൻലെറ്റ്: Connection point for the gas supply hose.
  • ശരീരം: സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ ഭവനം.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for safe operation. If you are unsure, consult a qualified technician.

  1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the stove from its packaging. Inspect for any damage. Retain packaging for potential future transport.
  2. പ്ലേസ്മെൻ്റ്: Place the stove on a stable, level, and heat-resistant surface. Ensure adequate clearance from walls and flammable materials. The stove is designed for countertop installation.
  3. ഗ്യാസ് കണക്ഷൻ:
    • Ensure the main gas supply valve is in the OFF position.
    • Connect a suitable gas hose (not included) to the gas inlet on the back of the stove and to your gas supply regulator.
    • Use appropriate gas-rated sealant tape on threaded connections to prevent leaks.
    • Tighten all connections securely, but do not overtighten.
    • Perform a leak test using soapy water on all connections. Bubbles indicate a leak. If a leak is detected, tighten the connection or replace the hose/sealant. Do not use an open flame for leak detection.
  4. Pan Support Placement: Place the pan supports securely over the burners.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 Before First Use:

Wipe down the stove surface and pan supports with a damp നിർമ്മാണ അവശിഷ്ടങ്ങൾ നീക്കം ചെയ്യാൻ തുണി.

4.2 Lighting a Burner:

  1. ഗ്യാസ് വിതരണ വാൽവ് തുറന്നിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  2. Place your cookware on the pan support over the desired burner.
  3. Push in and turn the corresponding control knob counter-clockwise to the "HIGH" position. You should hear the igniter clicking.
  4. Once the flame ignites, release the knob. If the flame does not ignite within 5 seconds, turn the knob to "OFF", wait for a minute, and try again.
  5. Adjust the flame intensity by turning the knob between "HIGH" and "LOW" settings.

4.3 Turning Off a Burner:

Turn the control knob clockwise until it clicks into the "OFF" position. Ensure the flame is extinguished.

4.4 General Cooking Tips:

  • Use cookware appropriate for the burner size.
  • പാചകം ശ്രദ്ധിക്കാതെ വിടരുത്.
  • പാചകം ചെയ്യുന്ന സ്ഥലത്ത് ശരിയായ വായുസഞ്ചാരം ഉറപ്പാക്കുക.

5. പരിപാലനവും ശുചീകരണവും

Regular cleaning and maintenance will prolong the life of your gas stove.

5.1 ദിവസേനയുള്ള വൃത്തിയാക്കൽ:

  • വൃത്തിയാക്കുന്നതിന് മുമ്പ് സ്റ്റൗ പൂർണ്ണമായും തണുക്കാൻ അനുവദിക്കുക.
  • Remove pan supports and wash them with warm, soapy water.
  • പരസ്യം ഉപയോഗിച്ച് സ്റ്റെയിൻലെസ് സ്റ്റീൽ ഉപരിതലം തുടയ്ക്കുകamp cloth and mild detergent. Avoid abrasive cleaners or scouring pads, which can scratch the surface.
  • Clean burner caps and rings if they are soiled. Ensure they are dry before reassembling.
  • വീണ്ടും കൂട്ടിച്ചേർക്കുന്നതിന് മുമ്പ് എല്ലാ ഭാഗങ്ങളും നന്നായി ഉണക്കുക.

5.2 Burner Maintenance:

Periodically check burner ports for blockages. Use a small wire or needle to clear any debris. Ensure burner caps are correctly seated after cleaning.

5.3 Gas Hose Inspection:

Regularly inspect the gas hose for cracks, kinks, or signs of wear. Replace immediately if any damage is found.

6. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ബർണർ ജ്വലിക്കുന്നില്ല.No gas supply; igniter not sparking; burner ports blocked; burner cap incorrectly placed.Check gas supply valve; ensure igniter is clicking; clean burner ports; reposition burner cap.
Flame is weak or uneven.Low gas pressure; burner ports blocked; burner cap incorrectly placed.Check gas regulator; clean burner ports; reposition burner cap.
ഗ്യാസിന്റെ ഗന്ധം തിരിച്ചറിഞ്ഞു.വാതക ചോർച്ച.Immediately turn off gas supply, ventilate area, and contact a qualified technician. Do not operate any electrical switches.

If the problem persists after attempting these solutions, contact customer support or a qualified service technician.

7 സ്പെസിഫിക്കേഷനുകൾ

  • ബ്രാൻഡ്: അടിസ്ഥാനം
  • മോഡൽ നമ്പർ: GC-7310P-2
  • തരം: ടേബിൾ ഗ്യാസ് സ്റ്റൗ
  • ഇന്ധന തരം: ഗ്യാസ്
  • ബർണറുകളുടെ എണ്ണം: 3
  • മെറ്റീരിയൽ: സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ
  • നിറം: വെള്ളി
  • ഉൽപ്പന്ന അളവുകൾ (D x W x H): 37 സെ.മീ x 61 സെ.മീ x 37 സെ.മീ
  • ഇൻസ്റ്റലേഷൻ രീതി: കൗണ്ടർടോപ്പ്
  • ഇഗ്നിഷൻ സിസ്റ്റം തരം: Gas Pilot

8. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the warranty card included with your product or contact Basic customer service. Keep your purchase receipt as proof of purchase.

നിർമ്മാതാവ്: അടിസ്ഥാനം

ആദ്യം ലഭ്യമായ തീയതി: 9 ജൂലൈ 2019

അനുബന്ധ രേഖകൾ - GC-7310P-2

പ്രീview ബേസിക് Z1C-DS-28K Bohrhammer Bedienungs- und Montageanleitung
Umfassende Bedienungs- und Montageanleitung für den BASIC Z1C-DS-28K Bohrhammer, einschließlich Sicherheitshinweisen, Bedienung, Wartung, technischen Daten und Umweltschutz.
പ്രീview ബേസിക് WD60271 ഇംപാക്ട് ഡ്രിൽ: ഓപ്പറേറ്റിംഗ്, അസംബ്ലി മാനുവൽ
BASIC WD60271 ഇംപാക്ട് ഡ്രില്ലിനായുള്ള സമഗ്രമായ പ്രവർത്തന, അസംബ്ലി നിർദ്ദേശങ്ങൾ, സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ, ഉദ്ദേശിച്ച ഉപയോഗം, പ്രവർത്തനം, പരിപാലനം, സാങ്കേതിക സവിശേഷതകൾ, പരിസ്ഥിതി നിർമാർജനം എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ബേസിക് Z1C-DS-28K റോട്ടറി ഹാമർ ഡ്രിൽ - ഉപയോക്തൃ മാനുവൽ
BASIC Z1C-DS-28K റോട്ടറി ഹാമർ ഡ്രില്ലിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സുരക്ഷാ നിർദ്ദേശങ്ങൾ, പ്രവർത്തനം, അറ്റകുറ്റപ്പണികൾ, സാങ്കേതിക സവിശേഷതകൾ എന്നിവ ഉൾക്കൊള്ളുന്നു. നിങ്ങളുടെ ഉപകരണം എങ്ങനെ സുരക്ഷിതമായി ഉപയോഗിക്കാമെന്നും പരിപാലിക്കാമെന്നും മനസ്സിലാക്കുക.
പ്രീview ബേസിക് ഇലക്‌ട്രോ-ഹെക്കൻഷെർ 450/46: ബേഡിയുങ്‌സ്-ഉണ്ട് മോൺtagഹെൽവെഗ്
Offizielle Bedienungs- und മോൺtageanleitung für die BASIC Elektro-Heckenschere 450/46 (മോഡൽ M1E-4ET-460, Artikel-Nr. 291841). Enthält Sicherheitshinweise, മോൺtage-, Betriebs- und Wartungsanleitungen für den privaten Gebrauch.
പ്രീview അടിസ്ഥാന കോർഡ്‌ലെസ് ഗ്രാസ് ട്രിമ്മർ BLH18 ഉപയോക്തൃ, അസംബ്ലി മാനുവൽ
ബേസിക് കോർഡ്‌ലെസ് ഗ്രാസ് ട്രിമ്മർ BLH18-നുള്ള സമഗ്രമായ ഉപയോക്തൃ, അസംബ്ലി മാനുവൽ, സുരക്ഷാ നിർദ്ദേശങ്ങൾ, പ്രവർത്തനം, അറ്റകുറ്റപ്പണികൾ, സാങ്കേതിക സവിശേഷതകൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview HWW 650 Hauswasserwerk ഉപയോക്തൃ മാനുവൽ | അടിസ്ഥാനം
ബേസിക് എച്ച്ഡബ്ല്യുഡബ്ല്യു 650 ഹൗസ്വാസ്സർവെർക്കിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, പ്രവർത്തനം, സുരക്ഷ, സാങ്കേതിക സവിശേഷതകൾ, അറ്റകുറ്റപ്പണികൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.