Klipsch C-200

Klipsch Synergy Black Label C-200 Center Channel Speaker User Manual

Model: C-200 | Brand: Klipsch

1. ആമുഖം

The Klipsch Synergy Black Label C-200 Center Channel Speaker is designed to deliver clear and precise dialogue and vocals for your home theater system. Its proprietary horn technology, dual 5.25-inch high-output woofers, and dynamic 1-inch tweeter work together to provide an immersive audio experience. This manual provides essential information for setting up, operating, and maintaining your C-200 speaker.

ഫ്രണ്ട് view of the Klipsch Synergy Black Label C-200 Center Channel Speaker

Figure 1: Klipsch Synergy Black Label C-200 Center Channel Speaker.

2. പാക്കേജ് ഉള്ളടക്കം

Please ensure all items are present in the package before proceeding with installation:

3. സജ്ജീകരണം

Proper setup is crucial for optimal performance and longevity of your speaker. The C-200 is designed for use as a center channel speaker in a home theater system.

3.1 പ്ലേസ്മെൻ്റ്

Position the center channel speaker directly above or below your television screen, centered horizontally. Ensure there are no obstructions in front of the speaker that could impede sound dispersion.

3.2 കണക്ഷനുകൾ

The Klipsch C-200 speaker must be connected to an AV receiver or amplifier for both audio signal and power. Use high-quality speaker wire (not included) to connect the speaker's terminals to the center channel output terminals on your receiver/amplifier. Ensure correct polarity (positive to positive, negative to negative) for all connections.

പ്രധാനപ്പെട്ടത്: Supplying the speaker with sufficient power from a compatible AV receiver or amplifier is essential for quality audio reproduction and to ensure the longevity of the speaker's components. Refer to your AV receiver's manual for specific connection instructions and power recommendations.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once properly connected to your AV receiver or amplifier, the Klipsch C-200 speaker will operate as part of your home theater system. The speaker does not have independent controls; all audio adjustments are made via your connected receiver/ampജീവൻ.

4.1 Initial Audio Configuration

After connecting, perform an audio setup or calibration through your AV receiver. Most modern receivers include an automatic calibration system (e.g., Audyssey, MCACC, YPAO) that uses a microphone to optimize speaker levels, distances, and equalization for your listening environment. This will ensure the C-200 integrates seamlessly with your other speakers.

4.2 Enhancing Dialogue Clarity

The C-200 is specifically designed for crystal-clear dialogue. If you find dialogue difficult to understand, check the following settings on your AV receiver:

Diagram showing Klipsch Tractrix Horn Technology

Figure 2: Klipsch Tractrix Horn Technology, designed for precise sound and minimal distortion.

Diagram showing Linear Travel Suspension Tweeter

Figure 3: Linear Travel Suspension Tweeter, contributing to detailed highs and minimal distortion.

Diagram showing Spun Copper Injection Molded Graphite Woofers

Figure 4: Spun Copper Injection Molded Graphite Woofers, engineered for tight bass response.

5. പരിപാലനം

To maintain the appearance and performance of your Klipsch C-200 speaker, follow these simple guidelines:

6. പ്രശ്‌നപരിഹാരം

If you experience issues with your Klipsch C-200 speaker, consult the following table for common problems and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
സ്പീക്കറിൽ നിന്ന് ശബ്ദമില്ലIncorrect wiring; Receiver/amplifier off or muted; Incorrect input selected on receiver.Check speaker wire connections for correct polarity and secure fit. Ensure receiver/amplifier is powered on and not muted. Select the correct audio input on your receiver.
Distorted or unclear dialogueImproper receiver settings; Overdriving the speaker; Loose connections.Perform receiver's auto-calibration. Adjust center channel level. Reduce overall volume if distortion occurs at high levels. Check all speaker wire connections.
ദുർബലമായ ബാസ് പ്രതികരണംIncorrect crossover settings; Phase issues.Check your receiver's crossover settings for the center channel (typically set to "Small" or with a crossover frequency around 80-100Hz). Ensure correct polarity of speaker wires.

If the problem persists after attempting these solutions, please contact Klipsch customer support or a qualified audio technician.

7 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡലിൻ്റെ പേര്Klipsch Synergy C-200
സ്പീക്കർ തരംസെന്റർ ചാനൽ
മൗണ്ടിംഗ് തരംഫ്ലോർ സ്റ്റാൻഡിംഗ്
മെറ്റീരിയൽമരം
നിറംകറുപ്പ്
ഉൽപ്പന്ന അളവുകൾ (D x W x H)6.47"D x 19.8"W x 7.5"H
ഇനത്തിൻ്റെ ഭാരം14.07 പൗണ്ട് (6.38 കി.ഗ്രാം)
ട്വീറ്റർ1 inch (Dynamic)
വൂഫറുകൾDual 5.25 inches (High-Output)
സ്പീക്കർ പരമാവധി ഔട്ട്പുട്ട് പവർ400 വാട്ട്സ്
പ്രതിരോധം8 ഓം
ഫ്രീക്വൻസി റെസ്‌പോൺസ് (ഉയർന്ന പരിധി)20 KHz
കണക്റ്റിവിറ്റിവയർഡ്
ശുപാർശ ചെയ്യുന്ന ഉപയോഗംസറൗണ്ട് സൗണ്ട് സിസ്റ്റങ്ങൾക്കായി
നിർമ്മാതാവ്ക്ലിപ്ഷ്
ആദ്യ തീയതി ലഭ്യമാണ്ജൂലൈ 26, 2019

8. വാറൻ്റിയും പിന്തുണയും

The Klipsch Synergy Black Label C-200 Center Channel Speaker comes with a Limited Warranty. For specific terms and conditions of your warranty, please refer to the documentation included with your purchase or visit the official Klipsch webസൈറ്റ്.

For technical support, troubleshooting assistance, or warranty claims, please contact Klipsch Customer Service. Contact information can typically be found on the Klipsch webസൈറ്റിലോ നിങ്ങളുടെ ഉൽപ്പന്ന പാക്കേജിംഗിലോ.

You can visit the official Klipsch Store for more information: ആമസോണിലെ ക്ലിപ്ഷ് സ്റ്റോർ

അനുബന്ധ രേഖകൾ - സി-200

പ്രീview ക്ലിപ്ഷ് സിനർജി ബ്ലാക്ക് ലേബൽ ഉപയോക്തൃ മാനുവൽ: സജ്ജീകരണവും പ്രവർത്തനവും
F-300, F-200, B-200, B-100, C-200, SUB 120, SUB 100 തുടങ്ങിയ മോഡലുകൾക്കുള്ള സജ്ജീകരണം, മുറി സ്ഥാപിക്കൽ, കണക്ഷനുകൾ, സുരക്ഷാ നിർദ്ദേശങ്ങൾ എന്നിവയുൾപ്പെടെ ക്ലിപ്ഷ് സിനർജി ബ്ലാക്ക് ലേബൽ സ്പീക്കറുകൾക്കായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ.
പ്രീview ക്ലിപ്ഷ് സിനർജി സീരീസ് ലൗഡ്‌സ്പീക്കറുകൾ: ഉടമയുടെ മാനുവലും വാറന്റിയും
SB-1, SC.5, SS.5 മോഡലുകൾ ഉൾപ്പെടെയുള്ള Klipsch Synergy സീരീസ് ലൗഡ്‌സ്പീക്കറുകൾക്കായുള്ള സമഗ്രമായ ഉടമയുടെ മാനുവലും വാറന്റി വിവരങ്ങളും. സജ്ജീകരണം, സുരക്ഷ, സ്പെസിഫിക്കേഷനുകൾ, പരിമിതമായ വാറന്റി എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ക്ലിപ്ഷ് ഹെറസി IV 3-വേ 12" ഹോൺ-ലോഡഡ് ലൗഡ്‌സ്പീക്കർ ഓണേഴ്‌സ് മാനുവലും സ്പെസിഫിക്കേഷനുകളും
ക്ലിപ്ഷ് ഹെറസി IV 3-വേ 12-ഇഞ്ച് ഹോൺ-ലോഡഡ് ലൗഡ്‌സ്പീക്കറിനായുള്ള ഔദ്യോഗിക ഉടമയുടെ മാനുവലും സ്പെസിഫിക്കേഷൻ ഷീറ്റും. ഉയർന്ന കാര്യക്ഷമത, പൊരുത്തപ്പെടുന്ന ജോഡികൾ, ബുക്ക്-മാച്ച്ഡ് വുഡ് വെനീർ, കരുത്തുറ്റ നിർമ്മാണം എന്നിവ സവിശേഷതകളിൽ ഉൾപ്പെടുന്നു. വിശദാംശങ്ങൾ പ്ലേസ്മെന്റ്, കണക്ഷനുകൾ, സുരക്ഷ, സാങ്കേതിക സവിശേഷതകൾ.
പ്രീview Klipsch Flexus Core 200 Sound Bar User Manual | Legendary American Sound
Discover the Klipsch Flexus Core 200, a premium 3.1.2-channel Dolby Atmos sound bar delivering legendary American sound. This comprehensive user manual guides you through setup, operation, app integration, and connectivity for an immersive home theater experience.
പ്രീview ക്ലിപ്ഷ് ഫ്ലെക്സസ് കോർ 300 സൗണ്ട് ബാർ യൂസർ മാനുവൽ
ലെജൻഡറി അമേരിക്കൻ സൗണ്ട് നൽകുന്ന 5.1.2-ചാനൽ ഡോൾബി അറ്റ്‌മോസ് സിസ്റ്റമായ ക്ലിപ്‌ഷ് ഫ്ലെക്‌സസ് കോർ 300 സൗണ്ട് ബാറിനുള്ള സമഗ്രമായ മാർഗ്ഗനിർദ്ദേശം ഈ ഉപയോക്തൃ മാനുവൽ നൽകുന്നു. വയർലെസ് സബ്‌വൂഫറുകളും സറൗണ്ട് സ്പീക്കറുകളും ഉപയോഗിച്ചുള്ള സജ്ജീകരണം, നിയന്ത്രണങ്ങൾ, കണക്ഷനുകൾ, സിസ്റ്റം വിപുലീകരണം, സ്മാർട്ട് സവിശേഷതകൾ എന്നിവയെക്കുറിച്ച് ക്ലിപ്‌ഷ് കണക്റ്റ് പ്ലസ് ആപ്പ് വഴി അറിയുക. ഒരു ഇമ്മേഴ്‌സീവ് ഹോം തിയറ്റർ അനുഭവം എങ്ങനെ സൃഷ്ടിക്കാമെന്ന് കണ്ടെത്തുക.
പ്രീview ക്ലിപ്ഷ് റെസിഡൻഷ്യൽ സർഫേസ് മൗണ്ട് ഔട്ട്ഡോർ ലൗഡ്സ്പീക്കറുകൾ ഉടമയുടെ മാനുവൽ
ക്ലിപ്ഷ് റെസിഡൻഷ്യൽ സർഫേസ് മൗണ്ട് ഔട്ട്‌ഡോർ ലൗഡ്‌സ്പീക്കറുകൾക്കുള്ള (RSM-400, RSM-525, RSM-650, RSM-800) ഉടമയുടെ മാനുവൽ, സുരക്ഷാ നിർദ്ദേശങ്ങൾ, ഉൽപ്പന്ന സവിശേഷതകൾ, പ്ലേസ്‌മെന്റ്, വാൾ മൗണ്ടിംഗ്, കണക്ഷനുകൾ, പെയിന്റിംഗ്, വാറന്റി വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.