Pelco P2230L-ESR

Pelco P2230L-ESR 2MP IR WDR Full HD Environmental PTZ Network Outdoor Dome Camera User Manual

Model: P2230L-ESR

Brand: Pelco

ആമുഖം

This manual provides instructions for the installation, operation, and maintenance of the Pelco P2230L-ESR 2MP IR WDR Full HD Environmental PTZ Network Outdoor Dome Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

സുരക്ഷാ വിവരങ്ങൾ

പ്രധാനപ്പെട്ട സുരക്ഷാ നിർദ്ദേശങ്ങൾ

പാക്കേജ് ഉള്ളടക്കം

എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്

Verify that all items listed below are present in your package. If any items are missing or damaged, contact your supplier immediately.

ഉൽപ്പന്നം കഴിഞ്ഞുview

ക്യാമറ ഘടകങ്ങൾ

The Pelco P2230L-ESR is a high-performance PTZ (Pan-Tilt-Zoom) network camera designed for environmental surveillance. It features a 2-megapixel sensor, infrared (IR) illumination, Wide Dynamic Range (WDR), and full HD resolution for clear imaging in various conditions.

Pelco P2230L-ESR PTZ Network Camera

This image displays the Pelco P2230L-ESR PTZ Network Camera, showing its dome-shaped lower section containing the lens and the cylindrical upper housing.

പ്രധാന സവിശേഷതകൾ

സജ്ജമാക്കുക

ഇൻസ്റ്റലേഷൻ ഗൈഡ്

The camera is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions. Proper installation is crucial for optimal performance and longevity.

Pelco P2230L-ESR Camera Dimensions Diagram

This diagram illustrates the detailed dimensions of the Pelco P2230L-ESR camera in various views (front, side, top, bottom), providing measurements in both inches and centimeters for precise installation planning.

വയറിംഗും കണക്ഷനുകളും

  1. പവർ കണക്ഷൻ: Connect the camera to a suitable power source as specified in the technical specifications. Ensure the power supply meets the camera's requirements.
  2. നെറ്റ്വർക്ക് കണക്ഷൻ: Connect an Ethernet cable from the camera's network port to your network switch or router. This provides both data and potentially Power over Ethernet (PoE) if supported by your switch.
  3. നെറ്റ്‌വർക്ക് കണക്ഷനുള്ള ഇതർനെറ്റ് കേബിൾ

    This image shows a standard blue Ethernet cable with RJ45 connectors, used for establishing a wired network connection to the camera.

  4. Optional I/O Connections: If applicable, connect external alarm inputs/outputs or audio devices according to the camera's interface and your system requirements. Refer to the detailed wiring diagram in the full product manual for specific pinouts.

പ്രാരംഭ നെറ്റ്‌വർക്ക് കോൺഫിഗറേഷൻ

After physical installation, access the camera's web interface using its default IP address or by using a Pelco discovery tool. Follow the on-screen prompts to set up network parameters, create secure user accounts, and configure initial camera settings such as time zone and date.

പ്രവർത്തിക്കുന്നു

ക്യാമറ ഓപ്പറേഷൻ

ആക്സസ് ചെയ്യുന്നു Web ഇൻ്റർഫേസ്

എ തുറക്കുക web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar. Log in using your configured username and password. The web interface provides access to live view, recording settings, motion detection, and PTZ controls.

Pan-Tilt-Zoom (PTZ) Control

Use the PTZ controls within the camera's web interface or a compatible VMS (Video Management System) to adjust the camera's pan, tilt, and zoom functions.

റെക്കോർഡിംഗും സംഭരണവും

Configure recording schedules, motion-triggered recording, and continuous recording options. Set up storage destinations such as Network Attached Storage (NAS) or a local SD card (if supported by the specific camera model) for video archives.

മോഷൻ ഡിറ്റക്ഷൻ

Set up motion detection zones and sensitivity levels to trigger alarms, recordings, or notifications when movement is detected within the defined surveillance area. This feature helps in efficient monitoring and storage management.

മെയിൻ്റനൻസ്

പരിചരണവും പരിപാലനവും

വൃത്തിയാക്കൽ

Regularly clean the camera's lens and housing with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals that could damage the optical surfaces or the camera's finish. For stubborn dirt, use a mild soap solution.

ഫേംവെയർ അപ്ഡേറ്റുകൾ

Periodically check the official Pelco website for firmware updates. Keeping the camera's firmware up-to-date ensures optimal performance, enhances security features, and provides access to new functionalities. Follow the instructions provided with the firmware update package carefully.

പാരിസ്ഥിതിക പരിഗണനകൾ

Ensure the camera's seals and connections remain intact to maintain its IP66 weatherproof rating, especially after any maintenance or installation adjustments. Inspect for any signs of wear or damage that could compromise its environmental protection.

ട്രബിൾഷൂട്ടിംഗ്

പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
വീഡിയോ ഫീഡ് ഇല്ലPower issue, network cable disconnected, incorrect IP address, camera malfunctionCheck power supply, verify network cable connection, confirm IP address and network settings. Restart the camera.
മോശം ചിത്ര നിലവാരംDirty lens, improper focus, low light conditions, network bandwidth limitationsClean the lens, adjust focus via the web interface, ensure adequate lighting, check network bandwidth and camera settings.
PTZ നിയന്ത്രണങ്ങൾ പ്രതികരിക്കുന്നില്ലNetwork connectivity issues, software glitch, camera malfunction, incorrect user permissionsVerify network connection, restart the camera, update firmware, check user permissions in the web ഇൻ്റർഫേസ്.
മോഷൻ ഡിറ്റക്ഷൻ പ്രവർത്തിക്കുന്നില്ലIncorrect sensitivity settings, detection zones not configured, event actions not setAdjust motion detection sensitivity and ensure zones are properly defined in the web interface. Verify event actions are configured.
ആക്സസ് ചെയ്യാൻ കഴിയില്ല web ഇൻ്റർഫേസ്Incorrect IP address, firewall blocking, network issue, browser compatibilityConfirm camera's IP address, check local network settings and firewall rules. Try a different web ബ്രൗസർ.
IR illumination not workingIR sensor blocked, setting disabled, hardware fault, insufficient powerEnsure IR sensor is clear, check IR settings in the web interface, verify power supply. Contact support if issue persists.

സ്പെസിഫിക്കേഷനുകൾ

സാങ്കേതിക സവിശേഷതകൾ

വാറൻ്റിയും പിന്തുണയും

ഉൽപ്പന്ന വാറണ്ടിയും ഉപഭോക്തൃ പിന്തുണയും

For detailed warranty information, please refer to the official Pelco website or the warranty card included with your product package. Warranty terms and conditions may vary by region and purchase date.

For technical assistance, troubleshooting, or further inquiries regarding your Pelco P2230L-ESR camera, please contact Pelco customer support. Their team can provide expert guidance and resolve any issues you may encounter.

You can find contact information and additional resources, including comprehensive product documentation and FAQs, on the official Pelco webസൈറ്റ്: www.pelco.com

അനുബന്ധ രേഖകൾ - P2230L-ESR

പ്രീview Spectra Enhanced 7 Series IP PTZ IR Look-Up Camera Installation Manual - Pelco
Comprehensive installation manual for the Pelco Spectra Enhanced 7 Series IP PTZ IR Look-Up Camera, including models S7230L-PW, S7240L-PW, and S7820L-PW. Covers important safety instructions, regulatory notices, product description, getting started, parts lists, product overview, detailed installation procedures, and troubleshooting contact information.
പ്രീview Pelco VideoXpert Ops Center User Guide - Configuration and Operation
Comprehensive user guide for Pelco's VideoXpert Ops Center, covering installation, configuration, application settings, video playback, PTZ controls, investigation mode, plug-ins, and event management.
പ്രീview Pelco VideoXpert OpsCenter v2.5 Keyboard Shortcuts Guide
Comprehensive guide to keyboard shortcuts for Pelco's VideoXpert OpsCenter v2.5, including G910 keyboard, SpaceMouse Pro, and KBD5000 controls for PTZ, playback, and system navigation.
പ്രീview പെൽകോ ഐപി വീഡിയോ സൊല്യൂഷൻസ്: ഉൽപ്പന്ന താരതമ്യ ഗൈഡ്
A comprehensive product comparison guide detailing Pelco by Schneider Electric's extensive range of IP video surveillance solutions, including cameras, video management systems, recorders, monitors, and accessories for various security applications.
പ്രീview PELCO Camera and SCADA Integration Guide | PELCO Viewer v3.0
This guide provides detailed instructions for integrating PELCO cameras with SCADA systems using the PELCO Viewer ActiveX Control. It covers installation, configuration, troubleshooting, and features for managing video streams and camera controls within SCADA environments.
പ്രീview പെൽകോ ഡിജിറ്റൽ സെൻട്രി റിലീസ് നോട്ടുകൾ
പെൽകോയുടെ ഡിജിറ്റൽ സെൻട്രി സോഫ്റ്റ്‌വെയറിനും ഉപകരണങ്ങൾക്കുമുള്ള പുതിയ സവിശേഷതകൾ, മെച്ചപ്പെടുത്തലുകൾ, പ്രധാന പരിഹാരങ്ങൾ എന്നിവ വിശദീകരിക്കുന്ന സമഗ്രമായ റിലീസ് കുറിപ്പുകൾ, 7.19 മുതൽ 7.2.30 വരെയുള്ള വിവിധ പതിപ്പുകൾ ഉൾക്കൊള്ളുന്നു.