Feit Electric T24/840/LEDG2/4

Feit Electric T24/840/LEDG2/4 LED Linear Tube Light Bulb User Manual

Model: T24/840/LEDG2/4

ബ്രാൻഡ്: ഫീറ്റ് ഇലക്ട്രിക്

1. ആമുഖം

Thank you for choosing the Feit Electric T24/840/LEDG2/4 LED Linear Tube Light Bulb. This manual provides essential information for the safe and efficient use of your new LED light bulbs.

These 2-foot T8/T12 LED lamps are designed to convert existing fluorescent fixtures to energy-efficient LED technology with a simple plug-and-play installation. The 4100K Cool White light provides 850 lumens of brightness while consuming only 8 watts of power, offering significant energy savings compared to traditional 20-watt fluorescent lamps. Feit Electric LED bulbs are shatter-resistant, RoHS compliant, and 100% mercury-free, ensuring a long lifespan and environmental safety.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

Four Feit Electric LED linear tube light bulbs

Image: Four Feit Electric T8/T12 LED linear tube light bulbs, showcasing ഉൽപ്പന്നത്തിന്റെ രൂപകൽപ്പന.

Close-up of a single Feit Electric LED linear tube light bulb

ചിത്രം: വിശദമായ ഒരു ചിത്രം view of a single Feit Electric LED linear tube light bulb, highlighting its bi-pin base.

3 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety instructions before installation and use.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The Feit Electric T24/840/LEDG2/4 LED Linear Tube Light Bulb is designed for simple "plug and play" installation, meaning no ballast replacement or rewiring is required for most compatible fluorescent fixtures.

  1. പവർ ഓഫ് ചെയ്യുക: Before beginning installation, ensure the power to the fluorescent light fixture is completely turned off at the circuit breaker.
  2. Remove Existing Fluorescent Tube: Carefully remove the existing fluorescent tube from the fixture. Allow it to cool if it has been recently in use.
  3. LED ട്യൂബ് ചേർക്കുക: Align the pins of the Feit Electric LED tube with the sockets in the fixture. Gently push the tube into the sockets and twist to secure it in place. Ensure both ends are fully seated.
  4. പവർ പുന ore സ്ഥാപിക്കുക: Once the LED tube is securely installed, restore power to the fixture at the circuit breaker.
  5. ടെസ്റ്റ്: Turn on the light switch to confirm the LED tube is functioning correctly.

പ്രധാന കുറിപ്പ്: This LED tube is designed to work with most electronic and magnetic ballasts. If the lamp does not light up after installation, ensure the ballast is compatible. Refer to the official Feit Electric website or contact customer support for a list of compatible ballasts if needed.

Feit Electric LED tube light bulb packaging

Image: The packaging for the Feit Electric 2ft LED Universal Plug & Play tube, indicating its compatibility and features.

5. ഓപ്പറേഷൻ

Operating your Feit Electric LED Linear Tube Light Bulb is straightforward. Once installed in a compatible fixture and power is restored, simply use the existing light switch to turn the light on or off. The LED tube will provide instant full brightness.

Garage or workshop illuminated by linear tube lights

ചിത്രം: ഒരു മുൻ കാമുകൻample of a garage or workshop space illuminated by linear tube lights, demonstrating typical application.

6. പരിപാലനം

The Feit Electric LED Linear Tube Light Bulb is designed to be virtually maintenance-free due to its long lifespan of up to 50,000 hours.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Feit Electric LED Linear Tube Light Bulb, refer to the following common troubleshooting steps:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ലൈറ്റ് ഓണാക്കില്ല.
  • ഘടിപ്പിക്കാൻ ശക്തിയില്ല.
  • ബൾബ് ശരിയായി സ്ഥാപിച്ചിട്ടില്ല.
  • പൊരുത്തപ്പെടാത്ത ബാലസ്റ്റ്.
  • ബൾബ് തകരാറാണ്.
  • സർക്യൂട്ട് ബ്രേക്കറും വാൾ സ്വിച്ചും പരിശോധിക്കുക.
  • Ensure bulb pins are fully inserted and twisted into sockets.
  • Verify ballast compatibility (refer to Feit Electric support).
  • Try a different bulb in the same fixture to isolate the issue.
വെളിച്ചം മിന്നിമറയുന്നു അല്ലെങ്കിൽ മങ്ങുന്നു.
  • പൊരുത്തപ്പെടാത്ത ബാലസ്റ്റ്.
  • അയഞ്ഞ കണക്ഷൻ.
  • Attempting to use with a dimmer.
  • Verify ballast compatibility.
  • ബൾബ് സുരക്ഷിതമായി സ്ഥാപിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • This bulb is non-dimmable; remove any dimmer switches.
ഫിക്സ്ചറിൽ നിന്ന് മൂളൽ ശബ്ദം.
  • Incompatible or aging ballast.
  • While these bulbs are plug-and-play, some older or incompatible ballasts may produce noise. Consider replacing the ballast or the entire fixture if the noise persists and is bothersome.

If the problem persists after trying these steps, please contact Feit Electric customer support for further assistance.

8 സ്പെസിഫിക്കേഷനുകൾ

ആട്രിബ്യൂട്ട്മൂല്യം
മോഡൽ നമ്പർT24/840/LEDG2/4
ലൈറ്റ് തരംഎൽഇഡി
വാട്ട്tage8 വാട്ട്സ്
ഇൻകാൻഡസെന്റ് തുല്യ വാട്ട്tage20 വാട്ട്സ്
തെളിച്ചം850 ല്യൂമെൻ
വർണ്ണ താപനില4100 കെൽവിൻ (കൂൾ വൈറ്റ്)
ബൾബ് ആകൃതി വലിപ്പംT8 / T12 Compatible
ബൾബ് ബേസ്G13 Bi-Pin
വാല്യംtage120 വോൾട്ട്
മങ്ങിയത്ഇല്ല
ജീവിതകാലയളവ്Up to 50,000 hours / 45.7 years
സർട്ടിഫിക്കേഷനുകൾETL Certified, RoHS Compliant
മെറ്റീരിയൽപ്ലാസ്റ്റിക്
ഉൽപ്പന്ന അളവുകൾ1"ആംശം x 24"ആംശം
ഇനത്തിൻ്റെ ഭാരം1.7 പൗണ്ട് (പായ്ക്കിന്)
ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ4 x 2 Ft. T8/T12 LED tubes
Diagram showing the dimensions of a 24-inch long, 1-inch diameter LED tube light bulb

Image: Dimensional diagram of the LED tube, indicating its 24-inch length and 1-inch diameter.

9. വാറൻ്റിയും പിന്തുണയും

ഫീറ്റ് ഇലക്ട്രിക് ഒരു നൽകുന്നു 5 വർഷത്തെ വാറൻ്റി for this product, ensuring quality and reliability.

For warranty claims, technical support, or further inquiries, please visit the official Feit Electric webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങലിനൊപ്പം നൽകിയിരിക്കുന്ന കോൺടാക്റ്റ് വിവരങ്ങൾ റഫർ ചെയ്യുക.

നിങ്ങൾക്ക് കൂടുതൽ ഉറവിടങ്ങളും ഉൽപ്പന്ന വിവരങ്ങളും ഇവിടെ കണ്ടെത്താനാകും ആമസോണിലെ ഫീറ്റ് ഇലക്ട്രിക് സ്റ്റോർ.

ഡൗൺലോഡ് ചെയ്യുന്നതിന് ഒരു ഔദ്യോഗിക ഇൻസ്റ്റലേഷൻ മാനുവലും (PDF) ലഭ്യമാണ്: PDF മാനുവൽ ഡൗൺലോഡ് ചെയ്യുക.

അനുബന്ധ രേഖകൾ - T24/840/LEDG2/4

പ്രീview Feit ഇലക്ട്രിക് T96 പ്ലഗ് ആൻഡ് പ്ലേ ലീനിയർ LED Lamp: സുരക്ഷാ നിർദ്ദേശങ്ങളും ഇൻസ്റ്റാളേഷൻ ഗൈഡും
Feit ഇലക്ട്രിക് T96 പ്ലഗ് ആൻഡ് പ്ലേ ലീനിയർ LED L-നുള്ള സമഗ്ര സുരക്ഷാ നിർദ്ദേശങ്ങളും ഇൻസ്റ്റാളേഷൻ ഗൈഡുംamp, ഇൻസ്റ്റാളേഷൻ, വാറന്റി, FCC പാലിക്കൽ എന്നിവ ഉൾക്കൊള്ളുന്നു. ഈ LED ബദൽ ഉപയോഗിച്ച് ഫ്ലൂറസെന്റ് ട്യൂബുകൾ എങ്ങനെ സുരക്ഷിതമായി മാറ്റിസ്ഥാപിക്കാമെന്ന് മനസിലാക്കുക.
പ്രീview Feit ഇലക്ട്രിക് T12 പ്ലഗ് ആൻഡ് പ്ലേ LED Lamp ഇൻസ്റ്റലേഷൻ ഗൈഡും സുരക്ഷാ നിർദ്ദേശങ്ങളും
ഫീറ്റ് ഇലക്ട്രിക്കിൽ നിന്നുള്ള ഈ ഗൈഡ് അവരുടെ T12 പ്ലഗ് ആൻഡ് പ്ലേ ലീനിയർ LED l ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനുള്ള അവശ്യ സുരക്ഷാ വിവരങ്ങളും ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങളും നൽകുന്നു.ampഫ്ലൂറസെന്റ് ട്യൂബുകൾക്ക് നേരിട്ടുള്ള പകരക്കാരനായി രൂപകൽപ്പന ചെയ്‌തിരിക്കുന്നു.
പ്രീview Feit ഇലക്ട്രിക് T24 പ്ലഗ് ആൻഡ് പ്ലേ ലീനിയർ LED Lamp: സുരക്ഷയും ഇൻസ്റ്റാളേഷൻ ഗൈഡും
Feit ഇലക്ട്രിക് T24 പ്ലഗ് ആൻഡ് പ്ലേ ലീനിയർ LED L-നുള്ള സമഗ്ര സുരക്ഷാ നിർദ്ദേശങ്ങളും ഇൻസ്റ്റാളേഷൻ ഗൈഡുംamp, ഫ്ലൂറസെന്റ് ട്യൂബുകൾക്ക് നേരിട്ടുള്ള പകരക്കാരനായി രൂപകൽപ്പന ചെയ്‌തിരിക്കുന്നു. സവിശേഷതകൾ, മുന്നറിയിപ്പുകൾ, ഇൻസ്റ്റാളേഷൻ ഘട്ടങ്ങൾ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview ഫീറ്റ് ഇലക്ട്രിക് T848/850/AB/U6/LED ലീനിയർ Lamp ഇൻസ്റ്റലേഷൻ ഗൈഡും സുരക്ഷാ നിർദ്ദേശങ്ങളും
Feit ഇലക്ട്രിക് T848/850/AB/U6/LED T8 & T12 ടൈപ്പ് A+B ലീനിയർ L എന്നിവയ്ക്കുള്ള സമഗ്ര സുരക്ഷാ നിർദ്ദേശങ്ങളും ഇൻസ്റ്റാളേഷൻ ഗൈഡുംamp, നേരിട്ടുള്ള മാറ്റിസ്ഥാപിക്കൽ, ബാലസ്റ്റ് ബൈപാസ് രീതികൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview Feit Electric T1248/4CCT/LED Linear Lamp: Safety Instructions & Installation Guide
Comprehensive safety instructions and plug-and-play installation guide for the Feit Electric T1248/4CCT/LED linear lamp, including warranty and FCC compliance information.
പ്രീview ഫീറ്റ് ഇലക്ട്രിക് T8 ബാലസ്റ്റ് ബൈപാസ് ലീനിയർ എൽamp ഇൻസ്റ്റലേഷൻ ഗൈഡ്
Feit ഇലക്ട്രിക് T8 ബാലസ്റ്റ് ബൈപാസ് ലീനിയർ LED L-നുള്ള സമഗ്ര സുരക്ഷാ നിർദ്ദേശങ്ങളും ഇൻസ്റ്റാളേഷൻ ഗൈഡുംamp, വയറിംഗ് ഡയഗ്രമുകളും വാറന്റി വിവരങ്ങളും ഉൾപ്പെടെ.