uxcell Synchronous Motor (2.5-3RPM) Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

This manual provides detailed instructions for the uxcell AC 100-127V Synchronous Motor, designed for various applications requiring stable, low-speed rotation. This motor operates at 2.5-3 Revolutions Per Minute (RPM) with a power consumption of 4W and supports both Clockwise (CW) and Counter-Clockwise (CCW) rotation. Its compact size and robust design make it suitable for a range of electrical apparatus and DIY projects.

Typical applications include: heater machines, electric fans, Christmas tree rotators, air conditioners, arts & crafts lighting, and popcorn machines.

2 സ്പെസിഫിക്കേഷനുകൾ

3 സുരക്ഷാ വിവരങ്ങൾ

Before installation or operation, please read and understand all safety warnings. Failure to do so may result in electric shock, fire, or serious injury.

• പവർ വിച്ഛേദിക്കുക: Always ensure the power supply is disconnected before performing any installation, maintenance, or troubleshooting.
• യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ: Installation and wiring should only be performed by qualified personnel familiar with electrical systems.
• ശരിയായ വാല്യംtage: വിതരണം വോളിയം ഉറപ്പാക്കുകtage മോട്ടോറിന്റെ റേറ്റുചെയ്ത വോള്യവുമായി പൊരുത്തപ്പെടുന്നുtage (AC 100-127V).
• സുരക്ഷിത മൗണ്ടിംഗ്: Mount the motor securely to prevent vibration and ensure stable operation.
• ഓവർലോഡ് ഒഴിവാക്കുക: Do not exceed the motor's rated torque (8 kgf.cm) or power (4W) to prevent damage.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: Operate the motor within appropriate temperature and humidity ranges. Avoid exposure to excessive dust or moisture.

4. ഇൻസ്റ്റലേഷനും സജ്ജീകരണവും

Follow these steps for proper installation of your synchronous motor:

1. മൗണ്ടിംഗ് ഉപരിതലം തയ്യാറാക്കുക: Identify a stable and flat surface for mounting the motor. Ensure there is adequate space for the motor body and shaft.
2. Mount the Motor: Use appropriate screws or bolts to secure the motor through its mounting holes. Ensure the motor is firmly attached to prevent movement during operation. Refer to the product dimensions for precise fitting.

ചിത്രം 1: മുകളിൽ view of the uxcell synchronous motor, showing the mounting holes and the label with specifications.
3. വയറിംഗ് ബന്ധിപ്പിക്കുക: The motor comes with two wires (40cm/15.7 inch length). Connect these wires to your AC 100-127V power supply. This motor supports both CW and CCW rotation, which is determined by the internal design and not by wiring polarity for AC motors.


ചിത്രം 2: പിൻഭാഗം view of the uxcell synchronous motor, highlighting the wiring connection point.

4. Attach Load to Shaft: Securely attach the intended load (e.g., turntable, fan blade) to the D-shaped shaft. Ensure the load is balanced and does not cause excessive strain on the motor. The shaft dimensions are 7mm/0.28 inch diameter and 15mm/0.59 inch length.


Image 3: Detailed diagram showing the dimensions of the uxcell synchronous motor, including body diameter, height, and shaft measurements.

5. ടെസ്റ്റ് ഓപ്പറേഷൻ: After installation, apply power and observe the motor's operation. Ensure smooth rotation and verify that the connected load functions as expected.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The uxcell synchronous motor is designed for continuous and stable operation at its rated speed of 2.5-3 RPM. Key operational characteristics include:

• Constant Speed: At the rated frequency (50-60Hz), the motor speed remains stable and is not affected by voltage fluctuations within the specified range.
• Bidirectional Rotation (CW/CCW): This motor is designed to rotate in both clockwise and counter-clockwise directions. The direction of rotation is typically determined by the initial startup phase and can alternate.
• ഓവർലോഡ് സംരക്ഷണം: The motor coil is designed to withstand overload or stalled conditions without immediate damage, providing a degree of protection for the motor. However, prolonged overload should be avoided.
• കുറഞ്ഞ ശബ്ദം: The motor operates with low noise levels, making it suitable for applications where quiet operation is desired.

Simply apply the specified AC voltage (100-127V) to the motor's leads to initiate operation. Disconnect power to stop the motor.

6. പരിപാലനം

To ensure the longevity and optimal performance of your uxcell synchronous motor, follow these maintenance guidelines:

• പതിവ് പരിശോധന: Periodically inspect the motor for any signs of wear, damage, or loose connections. Check the shaft for any obstructions.
• വൃത്തിയാക്കൽ: Keep the motor free from dust, dirt, and debris. Use a soft, dry cloth to wipe the exterior. Avoid using liquids or abrasive cleaners.
• വെൻ്റിലേഷൻ: Ensure the motor has adequate ventilation to prevent overheating. Do not block any vents if present.
• ലൂബ്രിക്കേഷൻ: This motor is typically maintenance-free and does not require external lubrication. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.
• വയറിംഗ് സമഗ്രത: Check the wiring for fraying, cuts, or loose terminals. Repair or replace damaged wiring immediately.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your synchronous motor, refer to the following troubleshooting guide:

If troubleshooting steps do not resolve the issue, contact uxcell customer support for further assistance.

8. വാറൻ്റിയും പിന്തുണയും

For warranty information and customer support regarding your uxcell Synchronous Motor, please refer to the purchase documentation or contact uxcell directly through their official webഉൽപ്പന്നം വാങ്ങിയ സൈറ്റ് അല്ലെങ്കിൽ റീട്ടെയിലർ.

പിന്തുണയുമായി ബന്ധപ്പെടുമ്പോൾ, ദയവായി ഇനിപ്പറയുന്ന വിവരങ്ങൾ നൽകുക:

• ഉൽപ്പന്ന മോഡൽ നമ്പർ: a19082100ux0933
• വാങ്ങിയ തീയതി
• പ്രശ്നത്തിന്റെ വിവരണം

For more information about uxcell products, visit the uxcell Store on Amazon.