ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your Nilight 12-Inch 300W Triple Row Flood Spot Combo LED Light Bar. Designed for extreme light efficiency, this light bar offers super brightness with its combo beam and nest reflector cup design. It is suitable for a wide range of vehicles and equipment, including Jeeps, trucks, ATVs, UTVs, SUVs, motorcycles, boats, and more.

Figure 1: Nilight 12-Inch 300W Triple Row Flood Spot Combo LED Light Bar.
ഉൽപ്പന്ന സവിശേഷതകൾ
The Nilight LED Light Bar incorporates advanced design and components for superior performance and durability.
- സൂപ്പർ തെളിച്ചം: Features a combo beam with triple row and nest reflector cup design in the middle for extreme light efficiency, providing 30000 lumens.
- Upgraded Reflector Cup: The broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination.
- കാര്യക്ഷമമായ താപ വിസർജ്ജനം: Constructed with a die-cast aluminum alloy housing and efficient cooling fins to ensure a lifespan of over 30,000 hours.
- IP67 Waterproof Rate: Designed to withstand harsh environmental conditions, offering protection against dust and water.
- ക്രമീകരിക്കാവുന്ന മൗണ്ടിംഗ് ബ്രാക്കറ്റ്: The bracket can be adjusted and slid, offering convenience to adjust position flexibly when needed.

Figure 2: High-performance internal components including 20 high-power highlight chips and inductance for stable current.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The Nilight LED Light Bar is designed for straightforward installation. Please ensure all components are present before beginning. For a comprehensive guide, refer to the official Installation Manual PDF available online: ഇൻസ്റ്റലേഷൻ മാനുവൽ (PDF).
പാക്കേജ് ഉള്ളടക്കം:
- 1 x 12-Inch 300W LED Light Bar
- മൗണ്ടിംഗ് ബ്രാക്കറ്റുകൾ
- Necessary Hardware (screws, nuts, washers, Allen wrench)
ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:
- മൗണ്ടിംഗ് സ്ഥലം തയ്യാറാക്കുക: Identify a suitable mounting location on your vehicle (e.g., bumper, roof rack). Ensure the surface is clean and stable.
- ലൈറ്റ് ബാറിൽ ബ്രാക്കറ്റുകൾ ഘടിപ്പിക്കുക: Secure the adjustable mounting brackets to the light bar using the provided hardware. The brackets allow for flexible positioning.
- വാഹനത്തിലേക്ക് ലൈറ്റ് ബാർ ഘടിപ്പിക്കുക: Position the light bar with attached brackets onto your chosen mounting surface. Mark the drilling points if necessary. Drill holes and secure the light bar firmly using the appropriate hardware.
- വയറിംഗ്: Connect the light bar to your vehicle's electrical system. It is recommended to use a wiring harness (not included) for proper power distribution and protection. Ensure correct polarity (positive to positive, negative to negative).
- ടെസ്റ്റ് പ്രവർത്തനം: Once installed and wired, test the light bar to ensure it functions correctly.

Figure 3: Installation steps and adjustable mounting bracket.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Nilight LED Light Bar features a combo beam design, combining both flood and spot patterns for versatile illumination.
ബീം പാറ്റേണുകൾ:
- ഫ്ലഡ് ബീം: Provides a wide spread of light, ideal for illuminating immediate surroundings and peripheral vision.
- സ്പോട്ട് ബീം: Offers a concentrated, long-distance beam for focused illumination far ahead.
- Combo Beam: Integrates both flood and spot patterns to provide a balanced light output, covering both near and far distances effectively.
To operate the light bar, activate the connected switch in your vehicle's cabin. The light bar will provide a powerful 30000 lumens of bright white light.

Figure 4: Nilight LED Light Bar providing illumination on a truck.

Figure 5: Nilight LED Light Bar enhancing visibility on a Jeep.
മെയിൻ്റനൻസ്
Proper maintenance ensures the longevity and optimal performance of your Nilight LED Light Bar.
വൃത്തിയാക്കൽ:
Regularly clean the lens and housing with a soft cloth and mild soap solution. Avoid abrasive cleaners or harsh chemicals that could damage the finish or lens.
ഈട് സവിശേഷതകൾ:
- IP67 Waterproof Rate: The light bar is sealed to protect against dust and water ingress, making it suitable for various weather conditions.
- കാര്യക്ഷമമായ തണുപ്പിക്കൽ: Features a die-cast aluminum alloy housing with thermal grease and cooling fins for superior heat dissipation, extending the lifespan of the LEDs.

Figure 6: IP67 waterproof design with sealed components.

Figure 7: Aluminum alloy housing and cooling fins for heat management.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your Nilight LED Light Bar, consider the following common solutions:
- ലൈറ്റ് ബാർ ഓണാക്കുന്നില്ല:
- Check all electrical connections to ensure they are secure and properly wired.
- Verify the power source (vehicle battery) is providing adequate voltagഇ (12V).
- നിങ്ങളുടെ വയറിംഗ് ഹാർനെസിലെ ഫ്യൂസ് പരിശോധിക്കുക (ബാധകമെങ്കിൽ) കൂടാതെ അത് പൊട്ടിയിട്ടുണ്ടെങ്കിൽ മാറ്റി സ്ഥാപിക്കുക.
- സ്വിച്ച് ശരിയായി പ്രവർത്തിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
- മങ്ങിയ അല്ലെങ്കിൽ മിന്നുന്ന പ്രകാശം:
- അയഞ്ഞ കണക്ഷനുകളോ ദ്രവിച്ച ടെർമിനലുകളോ പരിശോധിക്കുക.
- Ensure the light bar is receiving sufficient power.
- Verify the ground connection is solid.
- ലെൻസിനുള്ളിലെ ഈർപ്പം:
- While the light bar is IP67 rated, extreme temperature changes can sometimes cause condensation. This usually dissipates on its own. If persistent, check for damage to the seals.
For further assistance, please contact Nilight customer support.
സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the Nilight 12-Inch 300W Triple Row Flood Spot Combo LED Light Bar (Model: 18023C-A).

ചിത്രം 8: ഉൽപ്പന്ന അളവുകൾ.
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | 18023C-A |
| അളവുകൾ (L x W x H) | 12 x 3 x 3 ഇഞ്ച് |
| വാട്ട്tage | 300 വാട്ട്സ് |
| വാല്യംtage | 12 വോൾട്ട് |
| തിളങ്ങുന്ന ഫ്ലക്സ് | 30000 ല്യൂമൻസ് |
| നിറം | വെള്ള |
| മെറ്റീരിയൽ | അലുമിനിയം |
| ജല പ്രതിരോധ നില | IP67 വാട്ടർപ്രൂഫ് |
| ഇനത്തിൻ്റെ ഭാരം | 2.2 പൗണ്ട് (1 കിലോഗ്രാം) |
| മൗണ്ടിംഗ് തരം | ബമ്പർ മൗണ്ട് |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | 12Inch 300W LED LIGHT BAR, Mounting Brackets |
| ജീവിതകാലയളവ് | 30,000 മണിക്കൂറിലധികം |
വാറൻ്റിയും പിന്തുണയും
Nilight stands behind the quality of its products.
വാറൻ്റി വിവരങ്ങൾ:
This Nilight LED Light Bar comes with a 2 വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.
ഉപഭോക്തൃ പിന്തുണ:
For technical assistance, warranty claims, or any other inquiries, please visit the official Nilight webസൈറ്റ് ചെയ്യുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. നിങ്ങൾക്ക് റഫർ ചെയ്യാനും കഴിയും ഇൻസ്റ്റലേഷൻ മാനുവൽ (PDF) കൂടുതൽ വിവരങ്ങൾക്ക്.





