ആമുഖം
The Hunter ICC2 is a robust and versatile irrigation controller designed for light-to-mid size commercial applications. This outdoor metal cabinet version, Model I2C-800-M, comes with 8 stations and is expandable up to 54 stations with optional modules. It offers advanced water-saving features and user-friendly programming for efficient landscape irrigation management.
ഉൽപ്പന്നം കഴിഞ്ഞുview
ചിത്രം 1: മുൻഭാഗം view of the Hunter ICC2 8 Station Outdoor Metal Controller. The image shows the grey metal enclosure with the control panel visible. The panel features a digital display showing "6:34 AM", a large central dial for mode selection (System Off, Manual, Solar Sync, Seasonal Adjust, Date/Time, Start Times, Run Times, Water Days), and blue directional arrow buttons with a "PRG" button. The Hunter logo is visible on the right side of the panel.
The ICC2 controller features a high-visibility backlit display and an intuitive control dial for easy navigation and programming. The robust metal enclosure ensures durability for outdoor installations.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
കൺട്രോളർ മൌണ്ട് ചെയ്യുന്നു
The ICC2 outdoor metal controller is designed for wall mounting. Select a suitable location that is protected from direct sunlight and extreme weather conditions, yet accessible for programming and maintenance. Ensure the mounting surface is sturdy enough to support the controller's weight.
വയറിംഗ് കണക്ഷനുകൾ
Before making any electrical connections, ensure the power supply is disconnected. The controller requires a standard AC power input. Connect the common wire to the common terminal and individual station wires to their respective station terminals. If using a master valve or pump start relay, connect them to the designated terminals. The controller supports up to 8 stations initially and can be expanded with optional modules.
- പവർ ഇൻപുട്ട്: Connect the appropriate power supply wires to the controller's power terminals.
- Station Wiring: Connect irrigation valve wires to the numbered station terminals.
- സാധാരണ വയർ: Connect the common wire from all valves to the common terminal.
- സെൻസർ ഇൻപുട്ട്: Connect rain sensors or other compatible sensors to the designated sensor terminals.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
അടിസ്ഥാന പ്രോഗ്രാമിംഗ്
The ICC2 controller features a user-friendly interface with a central dial and directional buttons for programming. Rotate the dial to select different programming modes such as Date/Time, Start Times, Run Times, and Water Days. Use the arrow buttons to adjust values and the 'PRG' button to confirm selections.
പ്രധാന സവിശേഷതകൾ
- അസ്ഥിരമല്ലാത്ത മെമ്മറി: This feature protects against power interruptions, retaining current time, date, and all program data without the need for battery backup.
- One Touch Manual Start and Advance: To manually start any program, press and hold the right arrow key. To advance through stations within a program, press the right arrow key again.
- Easy Retrieve Memory: A manual backup utility that stores complete controller scheduling and setup information. This allows the saved watering schedule to be restored at any time, useful for resetting after tampering or at the start of a new season.
- Programmable Rain Delay: This feature allows you to set a specific number of days for the controller to remain in the OFF mode, preventing watering during inclement weather. The system automatically resumes scheduled irrigation after the delay period. The display shows the remaining delay days.
- ദ്രുത പരിശോധന: This diagnostic feature simplifies the assessment of field wiring issues. By pressing a button, the controller displays an "ERR" message if a short circuit is detected on a particular station number, aiding in rapid troubleshooting.
വിപുലീകരണ മൊഡ്യൂളുകൾ
The ICC2 controller can be expanded beyond its initial 8 stations. Optional expansion modules allow for up to 54 stations in the metal enclosure version. Refer to the expansion module's specific instructions for installation and configuration.
മെയിൻ്റനൻസ്
Regular maintenance ensures the longevity and optimal performance of your ICC2 controller.
- വൃത്തിയാക്കൽ: Periodically wipe the controller's exterior with a soft, damp തുണി. ഉരച്ചിലുകൾ ഉണ്ടാക്കുന്ന ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
- പരിശോധനകൾ: Annually inspect all wiring connections for corrosion or damage. Ensure the enclosure door is securely latched to protect internal components from the elements.
- സോഫ്റ്റ്വെയർ അപ്ഡേറ്റുകൾ: നിർമ്മാതാവ് പരിശോധിക്കുക webപ്രകടനം മെച്ചപ്പെടുത്തുന്നതോ പുതിയ സവിശേഷതകൾ ചേർക്കുന്നതോ ആയ ലഭ്യമായ ഏതെങ്കിലും ഫേംവെയർ അപ്ഡേറ്റുകൾക്കായുള്ള സൈറ്റ്.
ട്രബിൾഷൂട്ടിംഗ്
നിങ്ങളുടെ ICC2 കണ്ട്രോളറിൽ നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങൾക്കുള്ള പരിഹാരങ്ങൾ ഈ വിഭാഗം നൽകുന്നു.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| കൺട്രോളർ ഡിസ്പ്ലേ ശൂന്യമാണ്. | No power supply or power interruption. | Check power connections and circuit breaker. Ensure the controller is receiving adequate power. |
| "ERR" message on display for a station. | Field wiring short circuit detected on that station. | Use the Quick Check feature to identify the problematic station. Inspect the wiring for that station for any shorts or damage. Repair or replace faulty wiring. |
| Programs not running as scheduled. | Rain sensor activated, rain delay active, or program not enabled. | Check the status of the rain sensor. Verify if a rain delay is active and its duration. Ensure programs are enabled and start times are correctly set. |
സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: വേട്ടക്കാരൻ
- മോഡൽ: I2C-800-M
- ASIN: B081HDB2J2
- സ്റ്റേഷനുകൾ: 8 (expandable up to 54 with optional modules)
- എൻക്ലോഷർ മെറ്റീരിയൽ: ലോഹം
- നിറം: വെള്ളി
- ഡിസ്പ്ലേ തരം: എൽസിഡി (ബാക്ക്ലിറ്റ്)
- മെമ്മറി: അസ്ഥിരമല്ലാത്ത
- ഫീച്ചറുകൾ: Easy Retrieve Memory, One Touch Manual Start, Programmable Rain Delay, Quick Check
വാറൻ്റിയും പിന്തുണയും
For detailed warranty information and technical support, please refer to the official Hunter website or contact Hunter customer service. Keep your purchase receipt as proof of purchase for warranty claims.
Hunter Customer Support: www.hunterindustries.com/support എന്ന വിലാസത്തിൽ ഇവിടെ ക്ലിക്ക് ചെയ്യുക.
