DENALI D7 LED Light Pod with DataDim Technology

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The DENALI D7 LED Light Pod is a high-intensity auxiliary lighting solution designed for various applications, particularly suitable for vehicles requiring powerful illumination. With over 7,500 lumens, the D7 light pod is engineered to provide exceptional brightness and beam distance, enhancing visibility and safety.

This light pod features seven high-intensity 10-watt Cree LEDs, precisely focused through a proprietary single-piece optic. This design creates a full-bodied spot beam capable of reaching over 1200 feet at one lux. The robust heatsink and Active Thermal Management system ensure the lamp maintains optimal operating temperature, preventing light output degradation due to overheating.

ചിത്രം 1: മുൻഭാഗം view of the DENALI D7 LED Light Pod, showcasing its seven high-intensity LED lenses and durable black housing.

2 പ്രധാന സവിശേഷതകൾ

• High-Intensity Illumination: Equipped with 7x 10 Watt Cree XPL HI LEDs, delivering 7665 raw lumens per pod for superior brightness.
• നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Features DrySeal Submersible Waterproof design, allowing the light to withstand extreme environmental conditions.
• Impact-Resistant Bezels: Utilizes Impact PC Polycarbonate bezels that resist cracking, fading, and corrosion, unlike traditional aluminum bezels.
• Advanced Thermal Management: LiveActive Thermal Management system actively cools the LEDs, preventing overheating and maintaining consistent light output.
• Optimized Beam Performance: Engineered with a proprietary single-piece optic to produce a focused spot beam with a distance of 1205 feet and a width of 125 feet.
• DataDim Compatible: Designed for seamless integration with DataDim technology for advanced lighting control.
• കോംപാക്റ്റ് ഡിസൈൻ: ലോ-പ്രോfile mounting bracket included, along with stainless steel hardware for secure installation.

3 സാങ്കേതിക സവിശേഷതകൾ

4. പാക്കേജ് ഉള്ളടക്കം

Each DENALI D7 LED Light Pod package typically includes the following components:

• (1x) DENALI D7 LED Light Pod
• (1x) Hinge Mount with M8 Stainless Steel Hardware
• (1x) Wiring Pigtail

Note: Contents may vary slightly based on specific product bundles or regional packaging.

5. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

5.1 സുരക്ഷാ മുൻകരുതലുകൾ

• Ensure the vehicle's power is disconnected before beginning installation to prevent electrical shock or short circuits.
• സുരക്ഷാ ഗ്ലാസുകൾ, കയ്യുറകൾ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ധരിക്കുക.
• If unsure about any step, consult a qualified professional.

5.2 Mounting the Light Pod

1. Identify a suitable mounting location on your vehicle. The D7 light pod is designed for various applications, including motorcycles and off-road vehicles.
2. Attach the provided hinge mount to the light pod using the M8 stainless steel hardware. Ensure the hardware is tightened securely.
3. Secure the mounted light pod to your chosen location on the vehicle. Use appropriate tools to tighten all fasteners, ensuring the light is stable and will not vibrate loose during operation.

Figure 2: Two DENALI D7 LED Light Pods mounted on the front of a motorcycle, demonstrating a typical installation setup for enhanced visibility.

5.3 വയറിംഗ് നിർദ്ദേശങ്ങൾ

1. Connect the wiring pigtail from the D7 light pod to your vehicle's electrical system. Refer to your vehicle's service manual for specific wiring diagrams and fuse box locations.
2. Ensure all connections are secure and properly insulated to prevent short circuits and corrosion.
3. If utilizing DataDim technology, follow the specific wiring instructions provided with your DataDim controller (sold separately) for integrated dimming functionality.
4. Test the light pod functionality before fully reassembling any removed vehicle components.

6. ഓപ്പറേഷൻ നിർദ്ദേശങ്ങൾ

The DENALI D7 LED Light Pod operates on a 12 VDC system. Once properly installed and wired, the light pod can be activated via your vehicle's auxiliary light switch or integrated control system.

6.1 Basic On/Off Operation

Activate the light pod by turning on the connected switch. Ensure the vehicle's ignition is in the 'ON' position or the engine is running, depending on your wiring configuration.

6.2 DataDim Functionality (If Applicable)

If your D7 light pod is connected to a DENALI DataDim controller, you can control the light intensity. The DataDim controller allows for seamless switching between high and low beam settings using your vehicle's original high beam switch. Refer to the DataDim controller's specific manual for detailed operation and programming instructions.

Note: The D7 light pod is designed to work with DataDim technology, but the DataDim controller is typically sold separately.

7. പരിചരണവും പരിപാലനവും

Proper care and maintenance will ensure the longevity and optimal performance of your DENALI D7 LED Light Pod.

• വൃത്തിയാക്കൽ: Regularly clean the lens and housing with a soft cloth and mild soap solution. Avoid abrasive cleaners or harsh chemicals that could damage the polycarbonate bezel or lens. Rinse thoroughly with clean water.
• പരിശോധന: Periodically inspect the mounting hardware and wiring connections for any signs of loosening, corrosion, or damage. Tighten any loose fasteners and repair or replace damaged wiring as needed.
• വാട്ടർപ്രൂഫിംഗ്: The D7 light pod features DrySeal Submersible Waterproof technology. While designed to withstand harsh conditions, avoid directing high-pressure water jets directly at the light for extended periods, especially near cable entry points.
• തെർമൽ മാനേജ്മെൻ്റ്: Ensure the heatsink fins are free from dirt, mud, or debris to allow for proper heat dissipation. The LiveActive Thermal Management system relies on airflow to keep the LEDs cool.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your DENALI D7 LED Light Pod, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact DENALI customer support.

9. വാറൻ്റി വിവരങ്ങൾ

DENALI products are manufactured to high standards and are typically backed by a manufacturer's warranty. Specific warranty terms, conditions, and duration may vary. Please retain your proof of purchase for warranty claims.

For detailed warranty information, including coverage, limitations, and the claims process, please refer to the official DENALI website or contact their customer support directly. As per Amazon's policy, a 30-day return/replacement policy may apply from the date of purchase.

10. ഉപഭോക്തൃ പിന്തുണ

For further assistance, technical support, or inquiries regarding your DENALI D7 LED Light Pod, please contact DENALI Electronics customer support.

• നിർമ്മാതാവ് Webസൈറ്റ്: Visit the official DENALI Electronics webഉൽപ്പന്ന വിവരങ്ങൾ, പതിവുചോദ്യങ്ങൾ, പിന്തുണാ ഉറവിടങ്ങൾ എന്നിവയ്‌ക്കുള്ള സൈറ്റ്.
• ആമസോൺ സ്റ്റോർ: നിങ്ങൾക്ക് സന്ദർശിക്കാനും കഴിയും ആമസോണിലെ ഡെനാലി സ്റ്റോർ for product details and seller contact information.

When contacting support, please have your product model number (DNL.D7.050) and proof of purchase readily available.