DENALI CANsmart Controller GEN II for BMW R1200LC & R1250 Series Motorcycles User Manual

ആമുഖം

The DENALI CANsmart Controller GEN II is an advanced accessory management system designed specifically for BMW R1200LC and R1250 series motorcycles. This device provides plug-and-play installation and intelligent control of up to four DENALI accessories, such as auxiliary lights, horns, and brake lights, directly through the motorcycle's CAN bus system. It simplifies wiring and offers customizable settings for various functions, enhancing both safety and convenience.

പാക്കേജ് ഉള്ളടക്കം

താഴെ കൊടുത്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• DENALI CANsmart Controller GEN II Unit
• Wiring Harnesses for Accessory Circuits (Red, Blue, Yellow, White)
• CAN Bus Connector Cable
• Battery Terminal Connectors with Main Fuse
• യുഎസ്ബി പ്രോഗ്രാമിംഗ് കേബിൾ
• സിപ്പ് ബന്ധങ്ങൾ
• പശ മൗണ്ടിംഗ് പാഡ്

ചിത്രം: Contents of the DENALI CANsmart Controller GEN II package, including the main controller unit, various wiring harnesses, battery connectors, USB cable, zip ties, and an adhesive pad.

സുരക്ഷാ വിവരങ്ങൾ

Before installation and operation, please read and understand all safety warnings and instructions. Failure to do so may result in property damage, injury, or death.

• ഏതെങ്കിലും വൈദ്യുത ജോലികൾ ചെയ്യുന്നതിന് മുമ്പ് എപ്പോഴും മോട്ടോർസൈക്കിളിന്റെ ബാറ്ററി വിച്ഛേദിക്കുക.
• ഷോർട്ട് സർക്യൂട്ടുകൾ തടയുന്നതിന് എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും ശരിയായി ഇൻസുലേറ്റ് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
• Do not exceed the maximum current ratings for each circuit (10A continuous, 25A maximum for 25 seconds) or the total system (25A continuous).
• Consult a qualified motorcycle technician if you are unsure about any part of the installation process.
• Keep wiring away from hot engine components and moving parts.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps for proper installation of your DENALI CANsmart Controller GEN II.

Step 1: Prepare the Motorcycle

1. മോട്ടോർ സൈക്കിൾ നിരപ്പായ ഒരു പ്രതലത്തിൽ പാർക്ക് ചെയ്ത് അത് സ്ഥിരതയുള്ളതാണെന്ന് ഉറപ്പാക്കുക.
2. ഇഗ്നിഷൻ ഓഫ് ചെയ്ത് കീ നീക്കം ചെയ്യുക.
3. Disconnect the negative terminal of the motorcycle's battery.
4. Remove any necessary body panels or seats to access the CAN bus connector and battery.

Step 2: Connect the CANsmart Controller

1. Locate the motorcycle's CAN bus connector. Refer to your motorcycle's service manual for its exact location (often under the seat or near the diagnostic port).
2. Connect the CAN bus connector cable from the CANsmart Controller to the motorcycle's CAN bus port. This is a plug-and-play connection.
3. Connect the battery terminal wires from the CANsmart Controller to the motorcycle's battery terminals. Ensure the red wire connects to the positive (+) terminal and the black wire connects to the negative (-) terminal. The main fuse is integrated into the positive wire.

ചിത്രം: The DENALI CANsmart Controller GEN II unit installed discreetly under the seat of a BMW motorcycle, showing its compact size and integration with existing wiring.

ഘട്ടം 3: ആക്‌സസറികൾ ബന്ധിപ്പിക്കുക

1. Identify which of the four accessory circuits (Red, Blue, Yellow, White) you will use for each accessory. Each circuit has a 10A continuous rating.
2. Connect your DENALI accessories (e.g., auxiliary lights, horn, brake light) to the corresponding CANsmart circuit harnesses. Ensure proper polarity.
3. Route all wiring neatly and securely using the provided zip ties, keeping them away from heat sources and moving parts.

ചിത്രം: A detailed wiring diagram illustrating the connections for the DENALI CANsmart Controller. It shows the main unit, CAN bus connector, battery terminals with a 30A fuse, and the four accessory circuits (White, Yellow, Blue, Red), each rated for 10A.

Step 4: Secure the Controller

Use the adhesive mounting pad to secure the CANsmart Controller unit in a safe, dry location, typically under the seat or within a fairing, ensuring it is not exposed to direct elements or excessive heat.

Step 5: Reconnect Battery and Test

1. Reconnect the negative terminal of the motorcycle's battery.
2. Turn on the ignition and perform initial tests of your connected accessories.

Software Configuration and Operating Instructions

The CANsmart Controller's full functionality is accessed and customized via the DENALI CANsmart software, available for download from the DENALI website. This software allows you to assign specific functions to each of the four circuits and adjust their behavior.

സോഫ്‌റ്റ്‌വെയറിലേക്ക് കണക്റ്റുചെയ്യുന്നു

1. Download and install the DENALI CANsmart software on your computer.
2. Connect the CANsmart Controller to your computer using the provided USB programming cable.
3. Launch the CANsmart software. The software should automatically detect the connected controller.

Circuit Functions

The software interface allows you to configure each circuit independently. Common functions include:

• Light Pair 1 / Light Pair 2: For auxiliary driving lights, often with dimming, flash-to-pass, and high-beam sync features.
• കൊമ്പ്: For aftermarket horns, allowing integration with the motorcycle's horn button.
• ബ്രേക്ക് ലൈറ്റ്: For aftermarket brake lights, offering features like modulated braking or deceleration-activated lighting.
• ആക്സസറി: A general-purpose switched power output for other accessories.

ചിത്രം: Screenshot of the DENALI CANsmart software interface, showing options to configure the Red, Blue, Yellow, and White circuits. Icons represent various functions like Light Pair 1, Horn, Brake Light, and Accessory, with options to apply or cancel changes.

ക്രമീകരണങ്ങൾ ക്രമീകരിക്കുന്നു

Within the software, you can adjust parameters such as:

• Light intensity (dimming).
• Flash patterns for brake lights.
• Horn behavior.
• Trigger conditions for accessories (e.g., ignition on, high beam active).

Refer to the software's built-in help or the DENALI website for detailed instructions on each function and setting.

മെയിൻ്റനൻസ്

The DENALI CANsmart Controller GEN II is designed for maintenance-free operation. Periodically inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure the controller unit remains securely mounted and free from excessive moisture or heat.

• വൃത്തിയാക്കൽ: Wipe the controller unit with a dry, soft cloth if it becomes dirty. Do not use harsh chemicals or abrasive cleaners.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: Check the DENALI website periodically for firmware updates for your CANsmart Controller. Updates can be installed via the CANsmart software and USB cable.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your CANsmart Controller, refer to the following common problems and solutions:

If the problem persists, contact DENALI customer support for further assistance.

സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ: DNL.WHS.11602
• ഇൻപുട്ട് വോളിയംtage: 12V DC (Motorcycle Battery)
• സർക്യൂട്ടുകളുടെ എണ്ണം: 4 (Red, Blue, Yellow, White)
• സർക്യൂട്ട് റേറ്റിംഗ്: 10A continuous per circuit, 25A maximum for 25 seconds per circuit
• Total System Current: 25A തുടർച്ച
• അനുയോജ്യത: BMW R1200LC & R1250 series motorcycles
• കണക്റ്റിവിറ്റി: CAN Bus, USB for programming
• അളവുകൾ: Approximately 7 x 5 x 2 inches (Package Dimensions, actual unit is smaller)
• ഭാരം: Approximately 1 pound (Item Weight)

വാറൻ്റി വിവരങ്ങൾ

DENALI products are covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary. Please retain your proof of purchase. For detailed warranty information, please visit the official DENALI webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

പിന്തുണ

For technical assistance, troubleshooting, or further inquiries regarding your DENALI CANsmart Controller GEN II, please visit the DENALI Electronics webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണ ടീമിനെ ബന്ധപ്പെടുക.

Webസൈറ്റ്: www.denalielectronics.com

റഫർ ചെയ്യുക webഏറ്റവും കാലികമായ കോൺടാക്റ്റ് വിവരങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കുമുള്ള സൈറ്റ്.