ആമുഖം
Thank you for choosing the Intex PureSpa Plus 28431E Portable Inflatable Hot Tub Spa. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your spa. Please read all instructions carefully before installation and use to ensure proper function and longevity of your product.
സുരക്ഷാ വിവരങ്ങൾ
പ്രധാനപ്പെട്ട സുരക്ഷാ നിർദ്ദേശങ്ങൾ: ഈ ഇലക്ട്രിക്കൽ ഉപകരണം ഇൻസ്റ്റാൾ ചെയ്യുകയും ഉപയോഗിക്കുകയും ചെയ്യുമ്പോൾ, ഇനിപ്പറയുന്നവ ഉൾപ്പെടെ അടിസ്ഥാന സുരക്ഷാ മുൻകരുതലുകൾ എല്ലായ്പ്പോഴും പാലിക്കണം:
- എല്ലാ നിർദ്ദേശങ്ങളും വായിച്ച് പിന്തുടരുക.
- കുട്ടികളെ എല്ലായ്പ്പോഴും സൂക്ഷ്മമായി നിരീക്ഷിക്കുന്നില്ലെങ്കിൽ ഈ ഉൽപ്പന്നം ഉപയോഗിക്കാൻ അനുവദിക്കരുത്.
- A green colored terminal or a terminal marked G, GR, Ground, Grounding or the grounding symbol is located inside the supply terminal box. To reduce the risk of electric shock, this terminal must be connected to the grounding means provided in the electric supply service panel with a continuous copper wire equivalent in size to the circuit conductors supplying this equipment.
- At least two pressure wire connectors marked “BONDING LUGS” are provided on the external surface or inside the electrical compartment. To reduce the risk of electric shock, connect the local common bonding grid in the area of the spa to these terminals with an insulated or bare copper conductor not smaller than No. 8 AWG (8.4 mm²).
- All field-installed metal components such as rails, ladders, drains, or other similar hardware within 3 meters (10 feet) of the spa shall be bonded to the equipment grounding conductor of the spa in accordance with local requirements.
- മുന്നറിയിപ്പ്: പരിക്കിൻ്റെ അപകടസാധ്യത കുറയ്ക്കുന്നതിന്, കുട്ടികളെ എല്ലായ്പ്പോഴും സൂക്ഷ്മമായി നിരീക്ഷിക്കുന്നില്ലെങ്കിൽ ഈ ഉൽപ്പന്നം ഉപയോഗിക്കാൻ അനുവദിക്കരുത്.
- മുന്നറിയിപ്പ്: The spa water temperature should never exceed 40°C (104°F). Water temperatures between 38°C (100°F) and 40°C (104°F) are considered safe for a healthy adult. Lower water temperatures are recommended for young children and when spa use exceeds 10 minutes.
- മുന്നറിയിപ്പ്: Pregnant women and persons with heart disease, high blood pressure, diabetes, or other health conditions should consult a physician before using a spa.
- മുന്നറിയിപ്പ്: To avoid injury, exercise care when entering or exiting the spa.
- മുന്നറിയിപ്പ്: Do not use a spa immediately following strenuous exercise.
- മുന്നറിയിപ്പ്: Prolonged immersion in a spa may be hazardous to your health.
- മുന്നറിയിപ്പ്: Do not use drugs or alcohol before or during spa use to avoid unconsciousness and possible drowning.
- മുന്നറിയിപ്പ്: Always disconnect this product from the electrical supply before removing, cleaning, servicing or making any adjustment to the product.
- മുന്നറിയിപ്പ്: ഈ ഉൽപ്പന്നം വാണിജ്യപരമായ ഉപയോഗത്തിന് വേണ്ടിയുള്ളതല്ല.
- മുന്നറിയിപ്പ്: This product is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
Proper setup is crucial for the performance and safety of your Intex PureSpa Plus. Follow these steps carefully.
1. Site Selection and Preparation
Choose a flat, level surface free of sharp objects. Ensure the area can support the weight of the filled spa (approximately 290 gallons of water plus occupants). A ground cloth is recommended to protect the spa bottom.
2. പണപ്പെരുപ്പം
Unfold the spa liner and place it on the prepared ground cloth. Connect the inflation hose to the spa's air valve and the pump's inflation port. Inflate the spa until it is firm to the touch but not over-inflated. Do not use an air compressor for inflation.
3. Control Unit Connection
Connect the control unit to the spa liner following the instructions in the manual. Ensure all connections are secure. Plug the control unit into a grounded electrical outlet. Do not use extension cords.
4. വെള്ളം നിറയ്ക്കൽ
Fill the spa with fresh water using a garden hose. Fill to the recommended water level indicated on the spa liner. Do not overfill.
5. Filter Cartridge Installation
Install the filter cartridges into the filter housing inside the spa. Ensure they are properly seated and secured.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Familiarize yourself with the control panel to operate your spa effectively.
1. പവർ ഓൺ/ഓഫ്
Press the power button on the control panel to turn the spa on or off.
2. Heating System
Press the heater button to activate the heating system. Use the temperature adjustment buttons to set your desired water temperature (68-104°F / 20-40°C). The heater will automatically turn off once the set temperature is reached and restart if the temperature drops.
3. Bubble Jets
Activate the 170 high-powered bubble jets by pressing the bubble button. The bubble function provides a relaxing massage. Note that running the bubble jets may slightly decrease water temperature.
4. എൽഇഡി ലൈറ്റ് പ്രവർത്തനം
The spa includes a multi-colored LED light. Refer to the control panel for specific buttons to cycle through colors or set a preferred lighting mode.
മെയിൻ്റനൻസ്
Regular maintenance ensures optimal performance and extends the life of your spa.
1. Filter Cartridge Cleaning and Replacement
Check and clean the filter cartridges regularly, ideally after each use or every few days depending on usage. Rinse them with a garden hose. Replace cartridges every 2-4 weeks or when they remain dirty after cleaning.
2. ജലശുദ്ധീകരണം
The spa is equipped with a built-in hard water treatment system. However, regular water chemistry maintenance is essential. Test the water pH and sanitizer levels (e.g., chlorine) frequently and adjust as needed using appropriate spa chemicals. Maintain pH between 7.4 and 7.6.
3. വെള്ളം ഒഴുക്കിവിടലും സംഭരണവും
When not in use for extended periods or for seasonal storage, drain the spa completely. Clean and dry the spa thoroughly before deflating and storing it in a cool, dry place. Use the included carry bag for easy transport and storage.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues you might encounter with your Intex PureSpa Plus.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| സ്പാ ചൂടാക്കുന്നില്ല | Heater not activated, low water level, dirty filter, ambient temperature too low. | Ensure heater is on. Check water level and add water if necessary. Clean or replace filter cartridge. Ensure outdoor temperature is above 50°F (10°C) for optimal heating. |
| ബബിൾ ജെറ്റുകൾ പ്രവർത്തിക്കുന്നില്ല | Bubble function not activated, air pump malfunction. | Press the bubble button on the control panel. Check power supply to the control unit. If issue persists, contact customer support. |
| വെള്ളം മേഘാവൃതമാണ് | Dirty filter, improper water chemistry, high bather load. | Clean or replace filter cartridge. Test and adjust water chemistry (pH, sanitizer). Shock the water if necessary. Reduce bather load. |
| Spa is deflating | Air valve not closed properly, puncture in liner. | Ensure air valve is securely closed. Inspect liner for punctures and repair using the provided patch kit. |
സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the Intex PureSpa Plus Model 28431E.
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡലിൻ്റെ പേര് | 28431ഇ |
| ബ്രാൻഡ് | ഇന്റക്സ് |
| നിറം | നേവി ബ്ലൂ |
| ഉൽപ്പന്ന അളവുകൾ (വീർപ്പിച്ചത്) | 85"L x 85"W x 28"H (Inner/Outer Diameter: 65in / 85in) |
| മെറ്റീരിയൽ | Polyvinyl Chloride (PVC) with Fiber-Tech Construction |
| ജല ശേഷി | 290 ഗാലൻ |
| സീറ്റിംഗ് കപ്പാസിറ്റി | 6 ആളുകൾ |
| Number of Bubble Jets | 170 |
| വാല്യംtage | 110 വോൾട്ട് |
| ജല താപനില പരിധി | 68-104°F (20-40°C) |
| പ്രത്യേക സവിശേഷതകൾ | Built-in hard water treatment system, multi-colored LED light, 2 contoured headrests, puncture-resistant three-ply laminated material. |
| ഇനത്തിൻ്റെ ഭാരം | 110.3 പൗണ്ട് |
| യു.പി.സി | 078257284313 |
വാറൻ്റിയും പിന്തുണയും
For warranty information, please refer to the documentation included with your product or visit the official Intex website. If you require assistance with setup, operation, maintenance, or troubleshooting, please contact Intex customer support. Keep your purchase receipt and model number handy when contacting support.
ഉപഭോക്തൃ പിന്തുണ: For further assistance, please visit the Intex customer support portal or contact their service line as provided in your product packaging.
