Nerf Elite 2.0 Echo CS-10 Dart Blaster Instruction Manual

ആമുഖം

This manual provides essential information for the safe and effective use of your Nerf Elite 2.0 Echo CS-10 dart blaster. Please read all instructions carefully before assembly and operation. This blaster is designed for users aged 8 and up.

ബോക്സിൽ എന്താണുള്ളത്

Your Nerf Elite 2.0 Echo CS-10 package includes:

• 1x Nerf Elite 2.0 Echo CS-10 Blaster (with removable stock, barrel extension, and 10-dart clip)
• 24x Official Nerf Darts
• 1x ഇൻസ്ട്രക്ഷൻ മാനുവൽ

സുരക്ഷാ വിവരങ്ങൾ

WARNING: TO AVOID EYE INJURY.

• കണ്ണും മുഖവും ലക്ഷ്യമാക്കരുത്.
• The use of eyewear is recommended for players and people within range.
• Use only official Nerf darts. Other darts may not meet safety standards.
• ഡാർട്ടുകൾ അല്ലെങ്കിൽ ബ്ലാസ്റ്ററുകൾ പരിഷ്കരിക്കരുത്.

മുന്നറിയിപ്പ്: ശ്വാസംമുട്ടൽ അപകടം – ചെറിയ ഭാഗങ്ങൾ ഉണ്ടായേക്കാം. 3 വയസ്സിന് താഴെയുള്ള കുട്ടികൾക്ക് വേണ്ട.

ശുപാർശ ചെയ്യുന്ന പ്രായം: 8 വയസും അതിൽ കൂടുതലും.

സജ്ജമാക്കുക

1. Blaster Assembly

The Nerf Elite 2.0 Echo CS-10 blaster features a modular design, allowing for customization. The barrel extension and stock can be attached or removed as desired.

1. Attach Barrel Extension: Align the barrel extension with the front of the blaster and push firmly until it clicks into place.
2. Attach Stock: Slide the stock onto the rear attachment point of the blaster until it locks securely.

Image: The Nerf Elite 2.0 Echo CS-10 blaster fully assembled with its stock and barrel extension attached, alongside 24 official Nerf darts.

Image: A hand demonstrating the attachment of the removable stock to the blaster's rear.

2. ഡാർട്ടുകൾ ലോഡുചെയ്യുന്നു

The blaster uses a 10-dart clip for ammunition.

1. Insert Darts: Push official Nerf darts into the 10-dart clip one by one until it is full.
2. Insert Clip: Insert the loaded clip into the blaster's magazine well until it clicks securely into place.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the 10-dart clip and several individual Nerf Elite darts, ready for loading.

Image: A hand inserting a Nerf Elite dart into the 10-dart clip.

Operating the Blaster

Single-Shot Firing

1. Prime the Blaster: Pull the orange priming slide located on top of the blaster all the way back, then push it forward until it locks into place. This action loads a dart into the firing chamber.
2. ലക്ഷ്യം: Point the blaster at your target, ensuring no one is in the line of fire.
3. തീ: Pull the trigger to launch a single dart.

Slam Fire Action

For rapid-fire action, the Echo CS-10 features a Slam Fire mode:

1. Hold Trigger: Hold down the trigger continuously.
2. Rapid Priming: Quickly slide the orange priming slide back and forth repeatedly. Each full cycle will fire a dart as long as the trigger is held down and darts are available in the clip.

ഇഷ്ടാനുസൃതമാക്കൽ

The Nerf Elite 2.0 Echo CS-10 offers 4-in-1 customization options:

• Removable Stock: The stock can be detached for a more compact blaster configuration.
• Removable Barrel Extension: The barrel extension can be removed to shorten the blaster.
• Tactical Rails: Four tactical rails are available for attaching Nerf Elite 2.0 accessories (sold separately) to enhance your blaster.

Image: Visual representation of the four possible configurations of the Echo CS-10 blaster.

Image: The Nerf Elite 2.0 Echo CS-10 blaster with its stock removed, showcasing a compact setup.

മെയിൻ്റനൻസ്

To ensure optimal performance and longevity of your blaster:

• Keep the blaster clean and free from dirt or debris.
• Store darts in a clean, dry place to prevent damage.
• Only use official Nerf Elite darts to prevent damage to the blaster and ensure safe operation.

ട്രബിൾഷൂട്ടിംഗ്

Dart Jams

If a dart jams in the blaster:

1. Ensure the blaster is not primed.
2. Carefully open any access doors (if applicable) or inspect the barrel.
3. Gently remove the jammed dart. Do not force it, as this may damage the blaster.
4. ലോഡ് ചെയ്യുന്നതിനുമുമ്പ് ഡാർട്ടുകൾ വളയുകയോ കേടുപാടുകൾ സംഭവിക്കുകയോ ചെയ്തിട്ടില്ലെന്ന് ഉറപ്പാക്കുക.

Blaster Not Firing

If the blaster is not firing:

• Check if the clip is properly inserted and fully loaded with darts.
• Ensure the priming slide has been pulled all the way back and pushed all the way forward until it locks.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or customer support, please refer to the official Nerf or Hasbro website, or contact their customer service directly. Keep your proof of purchase for any warranty claims.