Olafus Wireless Spotlight (4-Pack) User Manual - Model LA-97CGDW-04-WE

ആമുഖം

This manual provides comprehensive instructions for the Olafus Wireless Spotlight (Model LA-97CGDW-04-WE). These battery-operated LED accent lights are designed for indoor use, offering adjustable brightness, a timer function, and remote control for convenient operation. Please read this manual thoroughly before use to ensure proper installation and operation.

പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

• 4 x Olafus Wireless Spotlights (Daylight White)
• 2 x റിമോട്ട് കൺട്രോളറുകൾ
• 4 x Double-Sided Adhesive Tapes (pre-attached to lights)
• 8 x സ്ക്രൂകൾ
• 1 x ഉപയോക്തൃ മാനുവൽ
• കുറിപ്പ്: 3 x AA batteries are required per spotlight and are not included.

Image: Four Olafus wireless spotlights and two remote controls, illustrating the complete package contents.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Please observe the following safety guidelines to ensure safe and effective use of your spotlights:

• Use the remote control within a 19.6-26.2 ft (6-8m) range. Physical obstructions between the remote and lights may interfere with the infrared signal.
• When using sticky back tape or screws for installation, ensure the mounting surface is clean and smooth.
• Always use new batteries. Mixing old and new batteries can shorten the life of the new batteries and may cause the spotlight to malfunction. Batteries are not included.
• This product is designed for indoor use only. Do not expose to moisture or outdoor elements.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

Each spotlight requires 3 AA batteries (not included). Follow these steps to install batteries:

1. Twist the back cover of the spotlight counter-clockwise to open the battery compartment.
2. Insert 3 AA batteries, ensuring correct polarity (+ and - terminals).
3. Twist the back cover clockwise to close and secure the battery compartment.

Image: A step-by-step diagram illustrating how to open the spotlight's back cover, insert three AA batteries, and then close the cover securely.

മൗണ്ടിംഗ് ഓപ്ഷനുകൾ

The spotlights can be installed using either the pre-attached double-sided adhesive tape or the included screws, depending on your preference and surface type.

ഓപ്ഷൻ 1: പശ മൗണ്ടിംഗ്

1. പൊടിയും ഗ്രീസും ഇല്ലെന്ന് ഉറപ്പാക്കാൻ ആവശ്യമുള്ള മൗണ്ടിംഗ് ഉപരിതലം നന്നായി വൃത്തിയാക്കുക.
2. Peel off the protective film from the double-sided adhesive tape located on the back of the spotlight.
3. Press the spotlight firmly onto the clean surface for at least 30 seconds to ensure a strong bond.

ഓപ്ഷൻ 2: സ്ക്രൂ മൗണ്ടിംഗ്

1. Twist the back cover of the spotlight counter-clockwise to detach it from the main unit.
2. Position the detached back cover on the desired surface and mark the locations for the screw holes.
3. Drill pilot holes if necessary, especially for harder surfaces.
4. Secure the back cover to the surface using the provided screws.
5. Align the spotlight unit with the mounted back cover and twist clockwise to lock it securely in place.

Image: Multiple Olafus spotlights installed on a ceiling, casting light onto framed artwork on a wall, demonstrating their application.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

പവർ ചെയ്യുന്നത് ഓൺ/ഓഫ്

The spotlights can be turned on or off using either the remote control or the manual button located on the light unit itself.

• മാനുവൽ ഓൺ/ഓഫ്: Press the small button on the side of the spotlight unit.
• റിമോട്ട് ഓൺ/ഓഫ്: Use the 'ON' and 'OFF' buttons on the remote control.

കുറിപ്പ്: If the light does not activate immediately after battery insertion, press the button on the light unit once to enable remote control functionality.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the spotlight showing a finger pressing the manual power button on its side.

വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ

The included remote controls allow for convenient adjustment of the spotlights. One remote can control multiple units simultaneously within range.

Image: A detailed diagram of the remote control, highlighting buttons for power, brightness adjustment (+/-), four preset brightness levels (10%, 40%, 80%, 100%), and four timing modes (10, 30, 60, 120 minutes).

• ഓൺ/ഓഫ്: Press to turn the spotlight on or off.
• തെളിച്ച ക്രമീകരണം (+/-): Use these buttons to incrementally increase or decrease the light's brightness.
• പ്രീസെറ്റ് തെളിച്ചം: Select from 10%, 40%, 80%, or 100% brightness levels for quick adjustment.
• ടൈമർ മോഡുകൾ: Set the light to automatically turn off after 10, 30, 60, or 120 minutes.

Image: A hand holding the remote control, with an overlay indicating a remote control distance of 6-8 meters (19.6-26.2 feet) and auto-off timer settings.

സ്പോട്ട്ലൈറ്റ് ഹെഡ് ക്രമീകരിക്കുന്നു

The spotlight head offers flexible positioning to direct light precisely where needed.

• The head can be rotated 360 degrees horizontally.
• The head can be tilted 90 degrees vertically.

Image: A diagram illustrating the adjustable nature of the spotlight head, showing its ability to rotate 360 degrees and tilt 90 degrees.

മെയിൻ്റനൻസ്

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

When the light appears dim, flickers, or turns off unexpectedly, it indicates that the batteries need replacement.

• Always replace all three AA batteries with new ones simultaneously.
• Do not mix old and new batteries, as this can lead to inconsistent performance and reduced battery life.
• Follow the battery installation steps outlined in the 'Setup and Installation' section.

ട്രബിൾഷൂട്ടിംഗ്

ഉൽപ്പന്ന സവിശേഷതകൾ

വാറൻ്റിയും പിന്തുണയും

Olafus products are designed for reliability and performance. For any questions, technical assistance, or warranty claims, please contact Olafus customer support through the retailer where the product was purchased or visit the official Olafus website. Please refer to your purchase documentation for specific warranty details and terms.