AKO 372920

AKO Sun Power S 250 Solar Fence Energizer

ഉപയോക്തൃ മാനുവൽ

ആമുഖം

The AKO Sun Power S 250 is a highly efficient, compact solar fence energizer designed for reliable operation in various agricultural settings. This device is ideal for managing paddocks and small fences, particularly those without dense vegetation, ensuring the safety and containment of your animals.

Equipped with intelligent battery management, the Sun Power S 250 offers extended autonomy, capable of operating for up to two weeks without direct sunlight. It also features deep discharge protection, indicated by a red flashing light when battery voltage drops below 11.2 V, safeguarding the battery's lifespan.

AKO Sun Power S 250 Solar Fence Energizer front view

ചിത്രം 1: മുൻഭാഗം view of the AKO Sun Power S 250 Solar Fence Energizer, showcasing its integrated solar panel and robust green casing.

സജ്ജമാക്കുക

Proper setup is crucial for the optimal performance of your AKO Sun Power S 250. Follow these steps to ensure effective operation:

  1. പ്ലേസ്മെൻ്റ്: Choose a location for the energizer that receives maximum direct sunlight throughout the day. Avoid shaded areas from trees, buildings, or dense vegetation. The solar panel should face south (in the Northern Hemisphere) for best results.
  2. മൗണ്ടിംഗ്: The energizer can be mounted on a fence post or a dedicated stand. Ensure it is securely fastened to prevent movement or damage from wind or animals.
  3. ഗ്രൗണ്ടിംഗ്: Connect the energizer's ground terminal (usually marked with a ground symbol or "EARTH") to a suitable ground rod. The ground rod should be driven deep into moist soil, away from other electrical grounds. A good ground system is essential for effective fence performance.
  4. വേലി കണക്ഷൻ: Connect the energizer's fence terminal (usually marked with a lightning bolt or "FENCE") to your electric fence line. Use insulated wire designed for electric fences to prevent energy loss.
  5. ബാറ്ററി കണക്ഷൻ: Ensure the internal 12V battery is properly connected. The intelligent battery management system will optimize charging from the solar panel.
AKO Sun Power S 250 mounted on a fence post with horses in the background

Figure 2: The AKO Sun Power S 250 installed on a wooden fence post, demonstrating its use in a pasture with horses. The solar panel is clearly visible, positioned to capture sunlight.

AKO Sun Power S 250 mounted on a fence post with electric fence tape

ചിത്രം 3: ഒരു അടുത്ത് view of the AKO Sun Power S 250 attached to a fence post, with white electric fence tape extending from it. This illustrates a typical installation scenario for small fences.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once properly set up, the AKO Sun Power S 250 operates largely autonomously. Here are key operational aspects:

പിൻഭാഗം view of AKO Sun Power S 250 showing battery compartment and terminals

ചിത്രം 4: പിൻഭാഗം view of the AKO Sun Power S 250, showing the battery compartment, power switch, and connection terminals for fence and ground wires. This view is essential for understanding wiring and controls.

മെയിൻ്റനൻസ്

Regular maintenance ensures the longevity and efficiency of your solar fence energizer:

ട്രബിൾഷൂട്ടിംഗ്

If your AKO Sun Power S 250 is not performing as expected, consider the following common issues and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
No fence pulse / Weak pulse
  • കുറഞ്ഞ ബാറ്ററി വോള്യംtage
  • മോശം ഗ്രൗണ്ടിംഗ്
  • Fence shorting out (vegetation, broken insulators)
  • അയഞ്ഞ കണക്ഷനുകൾ
  • Ensure solar panel is clean and receiving direct sunlight. Allow time for battery to charge.
  • Check ground rod connection and ensure it's in moist soil. Add more ground rods if necessary.
  • Inspect fence line for vegetation touching wires or damaged insulators. Clear vegetation and repair insulators.
  • Tighten all connections at the energizer and along the fence line.
Red light flashing (low battery indicator)
  • ചാർജുചെയ്യാൻ മതിയായ സൂര്യപ്രകാശം ഇല്ല
  • Excessive fence load (short circuit)
  • ബാറ്ററി ജീവിതാവസാനത്തിലേക്ക് അടുക്കുന്നു
  • Relocate energizer to a sunnier spot or clear obstructions.
  • Check fence for shorts.
  • Consider replacing the 12V battery if it no longer holds a charge.
Energizer not turning on
  • പവർ സ്വിച്ച് ഓഫാണ്
  • പൂർണ്ണമായും ഡിസ്ചാർജ് ചെയ്ത ബാറ്ററി
  • ആന്തരിക തകരാർ
  • പവർ സ്വിച്ച് "ഓൺ" സ്ഥാനത്താണെന്ന് ഉറപ്പാക്കുക.
  • Allow unit to charge in direct sunlight for at least 24-48 hours.
  • If issues persist after charging and checking connections, contact customer support.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡൽ നമ്പർ372920
ബ്രാൻഡ്എ.കെ.ഒ
പവർ ഉറവിടം12V Solar Powered
Maximum Fence Length (without vegetation)3 കിലോമീറ്റർ വരെ
ബാറ്ററി മാനേജ്മെൻ്റ്Intelligent battery management with deep discharge protection
കുറഞ്ഞ ബാറ്ററി സൂചകംRed flashing light at <11.2 V
പാക്കേജ് അളവുകൾ31 x 25 x 17 സെ.മീ
ഇനത്തിൻ്റെ ഭാരം3.91 കിലോഗ്രാം
നിർമ്മാതാവ്ആൽബർട്ട് കെർബ്ൾ ജിഎംബിഎച്ച്

വാറൻ്റിയും പിന്തുണയും

For specific warranty details and customer support, please refer to the documentation provided with your purchase or visit the official AKO website. Warranty terms typically cover manufacturing defects and vary by region and retailer.

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact AKO customer service or your authorized dealer. Keep your purchase receipt and model number (372920) handy when contacting support.

Note: Information regarding spare parts availability was not provided in the product data. Please consult the manufacturer for details.

അനുബന്ധ രേഖകൾ - 372920

പ്രീview AKO ഗ്യാസ് ലീക്ക് കണ്ടെത്തൽ അലാറം ഉപയോക്തൃ മാനുവൽ: മോഡലുകൾ AKO-55624 & AKO-55724
AKO-55624, AKO-55724 എന്നീ മോഡലുകൾ ഉൾക്കൊള്ളുന്ന AKO ഗ്യാസ് ലീക്ക് ഡിറ്റക്ഷൻ അലാറം സിസ്റ്റങ്ങൾക്കായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവലിൽ ഉപകരണ വിവരണം, ഇൻസ്റ്റാളേഷൻ, കോൺഫിഗറേഷൻ, പ്രവർത്തനം, സാങ്കേതിക സവിശേഷതകൾ, ആക്‌സസറികൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview മാനുവൽ ഡി ഉസുവാരിയോ ട്രാൻസ്മിസർ ഡി ഗ്യാസ് V3 AKO-575xxx
മാനുവൽ ഡി ഉസുവാരിയോ ഡെറ്റല്ലാഡോ പാരാ എൽ ട്രാൻസ്മിസർ ഡി ഗ്യാസ് V3 AKO-575xxx de AKO ഇലക്ട്രോമെക്കനിക്ക. ക്യൂബ്രെ ഇൻസ്റ്റാളേഷൻ, ഫൺസിയോണമിൻ്റൊ, കോൺഫിഗറേഷൻ, മാൻടെനിമിയൻ്റൊ, സ്പെസിഫിക്കേഷൻസ് ടെക്നിക്കസ് വൈ ആക്‌സിസോറിയോസ്.
പ്രീview AKO-575xxx Gas Transmitter User Manual
Comprehensive user manual for the AKO-575xxx Gas Transmitter, covering installation, operation, configuration, maintenance, technical specifications, and troubleshooting.
പ്രീview AKO V3 ഗ്യാസ് ട്രാൻസ്മിറ്റർ ഉപയോക്തൃ മാനുവൽ
AKO V3 ഗ്യാസ് ട്രാൻസ്മിറ്ററിനായുള്ള (മോഡൽ AKO-575xxx) ഉപയോക്തൃ മാനുവൽ, കൃത്യമായ ഗ്യാസ് കണ്ടെത്തലിനുള്ള ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, കോൺഫിഗറേഷൻ, സാങ്കേതിക സവിശേഷതകൾ എന്നിവ വിശദീകരിക്കുന്നു. NB-IoT ക്ലൗഡ് ഇന്റഗ്രേഷൻ വിവരങ്ങൾ ഉൾപ്പെടുന്നു.
പ്രീview AKO-575xxx Gasgeber V3 ബെനുത്സർഹാൻഡ്ബുച്ച്
Umfassendes Benutzerhandbuch für den AKO-575xxx Gasgeber V3 von AKO. Enthält detailslierte Anleitungen zu Installation, Configuration, Betrieb, Wartung und technischen Daten für professionelle Anwendungen.
പ്രീview AKO-555244 Alarm Control Unit - Instructions and Technical Manual
Comprehensive instructions and technical specifications for the AKO-555244 alarm control unit, designed for machine rooms and chamber safety. Covers installation, connections, configuration, operation, parameters, and technical details.