Sunbeam Heated Throw Blanket (Blue Plaid)

Sunbeam Heated Throw Blanket User Manual

Model: Heated Throw Blanket (Blue Plaid)

ആമുഖം

Thank you for choosing the Sunbeam Heated Throw Blanket. This manual provides important information for the safe and efficient use of your new heated throw. Designed for comfort and warmth, this fleece throw features Sunbeam's ThermoFine warming system, which senses and adjusts to deliver consistent warmth. It includes a controller with three heat settings and a 3-hour auto-off function for peace of mind.

പ്രധാനപ്പെട്ട സുരക്ഷാ നിർദ്ദേശങ്ങൾ

ഇലക്ട്രിക്കൽ വീട്ടുപകരണങ്ങൾ ഉപയോഗിക്കുമ്പോൾ, താഴെപ്പറയുന്നവയുൾപ്പെടെ, തീ, വൈദ്യുതാഘാതം, പരിക്കുകൾ എന്നിവയുടെ അപകടസാധ്യത കുറയ്ക്കുന്നതിന് അടിസ്ഥാന മുൻകരുതലുകൾ എല്ലായ്പ്പോഴും പാലിക്കണം:

സജ്ജമാക്കുക

  1. Unpack the Throw: Carefully remove the heated throw and controller from its packaging.
    Sunbeam Heated Throw Blanket, folded, with controller

    Image: The Sunbeam Heated Throw Blanket, folded, showing its blue plaid pattern and the attached controller.

  2. കൺട്രോളർ ബന്ധിപ്പിക്കുക: Locate the connector on the heated throw and the corresponding plug on the controller cord. Ensure they are aligned correctly and push firmly until they click into place.
    Sunbeam Heated Throw Blanket controller and power cord

    Image: The Sunbeam heated throw blanket's controller and power cord, showing the connection point for the blanket and the wall plug.

  3. പവറിൽ പ്ലഗ് ഇൻ ചെയ്യുക: Plug the power cord into a 120V AC electrical outlet. Ensure the cord is not pinched or covered by the blanket or furniture.
  4. Position the Throw: Lay the heated throw flat on a sofa, chair, or bed. Avoid bunching or folding the blanket excessively, as this can concentrate heat and potentially damage the internal wiring.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your Sunbeam Heated Throw Blanket is designed for ease of use with its intuitive controller.

Close-up of Sunbeam Heated Throw Blanket controller

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the Sunbeam heated throw blanket's controller, showing the power button and indicators for High, Med, and Low heat settings, along with the "Auto-Off 3 Hours" label.

  1. ഓണാക്കുന്നു: Press the power button (large circular button) on the controller to turn on the heated throw. The indicator light will illuminate.
  2. ചൂട് ക്രമീകരണങ്ങൾ ക്രമീകരിക്കുന്നു:
    • Press the power button repeatedly to cycle through the heat settings: High, Med, Low.
    • The corresponding indicator light (High, Med, Low) will light up to show the selected setting.
    • Allow a few minutes for the blanket to reach the desired temperature.
  3. ഓട്ടോ-ഓഫ് സവിശേഷത: The heated throw is equipped with a 3-hour auto-off feature for safety and energy conservation. After approximately 3 hours of continuous use, the throw will automatically turn off. To restart, simply press the power button again.
  4. ഓഫാക്കുന്നു: To turn off the heated throw manually, press the power button until all indicator lights are off, or unplug the unit from the wall outlet.

പരിപാലനവും പരിചരണവും

Proper care will ensure the longevity and performance of your Sunbeam Heated Throw Blanket.

കഴുകുന്നതിനുള്ള നിർദ്ദേശങ്ങൾ:

  1. വിച്ഛേദിക്കുക: Always disconnect the controller from the throw and unplug the power cord from the wall outlet before washing.
  2. മുൻകൂട്ടി കുതിർക്കുക (ഓപ്ഷണൽ): For best results, pre-soak the throw for 15 minutes in cold water with a mild detergent.
  3. മെഷീൻ വാഷ്: Machine wash on the "delicate" or "gentle" cycle in cold water (30°C / 86°F) using a small amount of mild detergent. Do not use bleach.
  4. കഴുകുക: Rinse on the "normal" cycle.
  5. മെഷീൻ ഡ്രൈ: Tumble dry on low heat (delicate/gentle cycle) for 5-10 minutes. Remove while still damp and gently stretch to original size.
  6. എയർ ഡ്രൈ: Drape the heated throw over a clothesline or shower rod. Do not use clothespins. Ensure the throw is completely dry before reconnecting the controller and plugging it back in.

സംഭരണം:

When not in use, store the heated throw loosely in a cool, dry place. Do not wrap the power cord tightly around the controller, as this can damage the cord.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Heated throw does not heat.
  • പ്ലഗ് ഇൻ ചെയ്തിട്ടില്ല.
  • Controller not properly connected to throw.
  • ഓട്ടോ-ഓഫ് സവിശേഷത സജീവമാക്കി.
  • പവർ യൂtage.
  • പവർ കോർഡ് പ്രവർത്തിക്കുന്ന ഒരു ഔട്ട്‌ലെറ്റിൽ സുരക്ഷിതമായി പ്ലഗ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Check that the controller plug is firmly connected to the throw.
  • Press the power button to restart the throw.
  • വീട്ടിലെ സർക്യൂട്ട് ബ്രേക്കർ പരിശോധിക്കുക.
Controller lights blink or flash.Product malfunction or error.Unplug the throw from the wall outlet for 30 seconds, then plug it back in. If the issue persists, contact customer service.
Blanket feels unevenly heated.Heating wires may be bunched or folded.Lay the throw flat and smooth out any bunched areas. Ensure it is not tucked in or folded excessively.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

This Sunbeam Heated Throw Blanket comes with a 5 വർഷത്തെ പരിമിത വാറൻ്റി. For warranty claims, technical support, or any questions regarding your product, please contact Sunbeam Customer Service.

Please visit the official Sunbeam webഏറ്റവും കാലികമായ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കുമുള്ള സൈറ്റ്: www.sunbeam.com

അനുബന്ധ രേഖകൾ - Heated Throw Blanket (Blue Plaid)

പ്രീview സൺബീം ചൂടാക്കിയ കിടക്ക ഉൽപ്പന്ന ഉപയോക്തൃ മാനുവൽ & സുരക്ഷാ ഗൈഡ്
വിശദമായ സുരക്ഷാ മുന്നറിയിപ്പുകൾ, സജ്ജീകരണ നിർദ്ദേശങ്ങൾ, ഓപ്പറേറ്റിംഗ് ഗൈഡ്, പരിചരണം, വൃത്തിയാക്കൽ നടപടിക്രമങ്ങൾ, 5 വർഷത്തെ പരിമിത വാറന്റി എന്നിവയുൾപ്പെടെ സൺബീം ചൂടാക്കിയ കിടക്ക ഉൽപ്പന്നങ്ങൾക്കായുള്ള ഔദ്യോഗിക ഉപയോക്തൃ മാനുവൽ. പോളറൈസ്ഡ് പ്ലഗ് വിവരങ്ങളും IMT21ES-B, TL21, TY21 മോഡൽ നമ്പറുകളും ഉൾക്കൊള്ളുന്നു.
പ്രീview സൺബീം ഹീറ്റഡ് ബെഡ്ഡിംഗ് ഓപ്പറേഷൻ ആൻഡ് കെയർ മാനുവൽ
സൺബീം ഹീറ്റഡ് ബെഡ്ഡിംഗിനായുള്ള സമഗ്രമായ ഗൈഡ്, സുരക്ഷാ നിർദ്ദേശങ്ങൾ, സജ്ജീകരണം, പ്രവർത്തനം, കൺട്രോളർ ഉപയോഗം, പരിചരണവും വൃത്തിയാക്കലും, വാറന്റി വിവരങ്ങൾ, മോഡലായ IMGY22-ES-നുള്ള FCC പാലിക്കൽ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview സൺബീം ഫീൽ പെർഫെക്റ്റ് ഹീറ്റഡ് ത്രോ ബ്ലാങ്കറ്റ് യൂസർ ഗൈഡ് - സുരക്ഷ, ഫീച്ചറുകൾ, പരിചരണം
സൺബീം ഫീൽ പെർഫെക്റ്റ് ഹീറ്റഡ് ത്രോ ബ്ലാങ്കറ്റ് മോഡലുകളായ TRF4000, TRF4100, TRF4200, TRF4300, TRP4400 എന്നിവയ്‌ക്കായുള്ള സമഗ്ര ഉപയോക്തൃ ഗൈഡ്. സുരക്ഷാ മുൻകരുതലുകൾ, സ്ലീപ്പ്‌പെർഫെക്റ്റ്® സാങ്കേതികവിദ്യ, ഉപയോഗം, ട്രബിൾഷൂട്ടിംഗ്, പരിചരണ നിർദ്ദേശങ്ങൾ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview സൺബീം ചൂടാക്കിയ ബെഡ്ഡിംഗ് ഉപയോക്തൃ മാനുവൽ: സുരക്ഷ, സജ്ജീകരണം, പരിചരണം, വാറന്റി
ബ്ലാങ്കറ്റുകൾ, മെത്ത പാഡുകൾ, ത്രോകൾ എന്നിവയുൾപ്പെടെ സൺബീം ചൂടാക്കിയ കിടക്ക ഉൽപ്പന്നങ്ങൾക്കായുള്ള ഔദ്യോഗിക ഉപയോക്തൃ മാനുവലിൽ. പ്രധാനപ്പെട്ട സുരക്ഷാ മുന്നറിയിപ്പുകൾ, ദ്രുത സജ്ജീകരണ ഗൈഡുകൾ, നിയന്ത്രണ വിശദീകരണങ്ങൾ, പരിചരണ, വൃത്തിയാക്കൽ നിർദ്ദേശങ്ങൾ, പതിവുചോദ്യങ്ങൾ, വാറന്റി വിവരങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു. പിന്തുണയ്ക്കായി www.sunbeambedding.com സന്ദർശിക്കുക.
പ്രീview സൺബീം കണക്റ്റഡ് ഹീറ്റഡ് ബെഡ്ഡിംഗ് യൂസർ മാനുവൽ
സൺബീം കണക്റ്റഡ് ഹീറ്റഡ് ബെഡ്ഡിംഗിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സജ്ജീകരണം, വയർഡ് കൺട്രോളർ, മൊബൈൽ ആപ്പ് വഴിയുള്ള പ്രവർത്തനം, വോയ്‌സ് അസിസ്റ്റന്റ് ഇന്റഗ്രേഷൻ, പരിചരണ നിർദ്ദേശങ്ങൾ, ട്രബിൾഷൂട്ടിംഗ്, വാറന്റി വിവരങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview സൺബീം ചൂടാക്കിയ കിടക്ക ഉപയോക്തൃ മാനുവൽ: സുഖകരവും സുരക്ഷാ ഗൈഡും
സൺബീം ചൂടാക്കിയ കിടക്ക ഉൽപ്പന്നങ്ങൾക്കായുള്ള സമഗ്രമായ മാർഗ്ഗനിർദ്ദേശം ഈ ഉപയോക്തൃ മാനുവൽ നൽകുന്നു, ചൂടാക്കിയ പുതപ്പുകൾ, മെത്ത പാഡുകൾ, ത്രോകൾ എന്നിവയുടെ സജ്ജീകരണം, സുരക്ഷ, പരിചരണം, നിയന്ത്രണ സവിശേഷതകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു. സൺബീം ഉപയോഗിച്ച് സുഖസൗകര്യങ്ങൾ പരമാവധിയാക്കാനും സുരക്ഷിതമായ പ്രവർത്തനം ഉറപ്പാക്കാനും എങ്ങനെയെന്ന് അറിയുക.