ആമുഖം
This manual provides detailed instructions for the safe installation, operation, and maintenance of your ProCom Dual Fuel Ventless Gas Fireplace System with Mantle. This system is designed to operate efficiently using either Natural Gas (NG) or Liquid Propane (LP) and features a thermostat control for consistent heating. Please read all instructions carefully before installation and use.

ചിത്രം: മുൻഭാഗം view of the ProCom Dual Fuel Ventless Gas Fireplace System in Antique White, showcasing the mantle and the firebox with realistic logs and flames.
സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: അനുചിതമായ ഇൻസ്റ്റാളേഷൻ, ക്രമീകരണം, മാറ്റം, സേവനം, അല്ലെങ്കിൽ അറ്റകുറ്റപ്പണികൾ എന്നിവ പരിക്കുകളോ വസ്തുവകകളോ നശിപ്പിക്കുന്നതിന് കാരണമാകും. ഈ മാനുവൽ കാണുക. സഹായത്തിനോ കൂടുതൽ വിവരങ്ങൾക്കോ, യോഗ്യതയുള്ള ഒരു ഇൻസ്റ്റാളറെയോ സേവന ഏജൻസിയെയോ ഗ്യാസ് വിതരണക്കാരനെയോ സമീപിക്കുക.
- ഈ ഉപകരണം ഇൻഡോർ ഉപയോഗത്തിന് മാത്രമുള്ളതാണ്.
- ഈ അല്ലെങ്കിൽ മറ്റേതെങ്കിലും ഉപകരണത്തിൻ്റെ പരിസരത്ത് ഗ്യാസോലിൻ അല്ലെങ്കിൽ മറ്റ് കത്തുന്ന നീരാവി, ദ്രാവകങ്ങൾ എന്നിവ സൂക്ഷിക്കുകയോ ഉപയോഗിക്കുകയോ ചെയ്യരുത്.
- ഉയർന്ന താപനില കാരണം, അപ്ലയൻസ് ട്രാഫിക്കിൽ നിന്നും ഫർണിച്ചറുകൾക്കും ഡ്രെപ്പറികൾക്കും പുറത്ത് സ്ഥിതിചെയ്യണം.
- ഉയർന്ന ഉപരിതല താപനിലയുടെ അപകടങ്ങളെക്കുറിച്ച് കുട്ടികളും മുതിർന്നവരും മുന്നറിയിപ്പ് നൽകുകയും പൊള്ളലേറ്റതോ വസ്ത്രങ്ങൾ കത്തിക്കുന്നതോ ഒഴിവാക്കാൻ അകന്നു നിൽക്കുകയും വേണം.
- ഉപകരണത്തിന്റെ അതേ മുറിയിൽ ആയിരിക്കുമ്പോൾ ചെറിയ കുട്ടികളെ ശ്രദ്ധാപൂർവ്വം നിരീക്ഷിക്കണം.
- വസ്ത്രങ്ങളോ മറ്റ് തീപിടിക്കുന്ന വസ്തുക്കളോ ഉപകരണത്തിനോ സമീപത്തോ സ്ഥാപിക്കരുത്.
- This appliance is equipped with an Oxygen Depletion Sensor (ODS) safety system. Do not attempt to bypass or tamper with the ODS.
- Ensure adequate ventilation as specified in the installation instructions.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
അൺപാക്കിംഗും പരിശോധനയും
Carefully remove all components from the packaging. Inspect for any shipping damage. If any damage is found, contact your retailer immediately. Ensure all parts listed in the "What's in the Box" section are present.
- Ventless Fireplace Insert - Qty. 1
- Ceramic Fiber Log Set - Qty. 1 (4 realistic hand painted Concrete Logs)
- Hardware Pack - Qty. 1
- Fireplace Mantel (Antique White Furniture Grade Finish) - Qty. 1
അസംബ്ലി
Some assembly is required for the mantle and the fireplace insert. Refer to the general assembly instructions provided with the product. Ensure the fireplace insert is securely placed within the mantle.

Image: The ProCom fireplace system integrated into a living room setting, demonstrating its aesthetic appeal.
Fuel Type Selection (Dual Fuel Technology)
This fireplace system is designed for use with either Natural Gas (NG) or Liquid Propane (LP). It is crucial to select the correct fuel type and ensure the appliance is configured accordingly before connecting to a gas supply.
പ്രധാനപ്പെട്ടത്: Conversion between NG and LP must be performed by a qualified service technician. Incorrect conversion can lead to unsafe operation and void the warranty.

Image: Close-up of the gas inlet ports, labeled NG (Natural Gas) and LP (Liquid Propane), showing the blue cap for LP. This indicates the current configuration or the port for LP connection.

Image: Close-up of the gas inlet ports, labeled NG (Natural Gas) and LP (Liquid Propane), showing both yellow and blue caps. This illustrates the dual fuel capability and the distinct caps for each gas type.
ഗ്യാസ് കണക്ഷൻ
Connect the fireplace to the appropriate gas supply (Natural Gas or Liquid Propane) using approved gas connectors and fittings. Ensure all connections are tight and leak-free. A gas pressure test must be performed by a qualified technician.
- Maximum inlet gas pressure: 1/2 PSIG (3.5 kPa).
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
പ്രാരംഭ സ്റ്റാർട്ടപ്പ്
- ഗ്യാസ് വിതരണ വാൽവ് തുറന്നിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Press and hold the control knob (refer to image below) to the "PILOT" position.
- While holding the knob, press the Piezo ignitor button repeatedly until the pilot flame ignites.
- Continue to hold the control knob for approximately 30-60 seconds after the pilot ignites to allow the thermocouple to heat up.
- കൺട്രോൾ നോബ് വിടുക. പൈലറ്റ് ജ്വാല അണഞ്ഞാൽ, 2-4 ഘട്ടങ്ങൾ ആവർത്തിക്കുക.

Image: Close-up of the control panel showing the main control knob with settings for "OFF", "PILOT", and numbered temperature settings (1-5), alongside the Piezo ignitor button.
Thermostat Control Operation
Once the pilot is lit, turn the control knob to the desired temperature setting (1-5). The thermostat will automatically cycle the main burner on and off to maintain the set room temperature. Setting 1 is the lowest heat output, and setting 5 is the highest.
- 15,000 BTU Maximum Output: 600 ചതുരശ്ര അടി വരെ ചൂടാക്കാം.
- 99.9% Efficient: Provides economical supplemental heat.
Shutting Down the Fireplace
- To turn off the main burner, turn the control knob to the "PILOT" position. The pilot flame will remain lit.
- To completely turn off the fireplace, turn the control knob to the "OFF" position. This will extinguish both the main burner and the pilot flame.
- For extended periods of non-use, it is recommended to close the main gas supply valve.
മെയിൻ്റനൻസ്
ജനറൽ ക്ലീനിംഗ്
- ജ്വലന വസ്തുക്കൾ, ഗ്യാസോലിൻ, മറ്റ് കത്തുന്ന നീരാവി, ദ്രാവകങ്ങൾ എന്നിവയിൽ നിന്ന് ഉപകരണത്തിൻ്റെ പ്രദേശം വ്യക്തവും സ്വതന്ത്രവുമായി സൂക്ഷിക്കുക.
- Periodically clean the exterior surfaces of the mantle with a soft, damp തുണി. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകൾ ഒഴിവാക്കുക.
- Ensure the air openings of the appliance are not obstructed.
Log Set Care
The ceramic fiber logs are designed for durability. Handle them carefully to avoid breakage. Do not rearrange the logs from their factory-set positions, as this can affect flame appearance and efficiency.
വാർഷിക പരിശോധന
It is recommended to have the fireplace inspected annually by a qualified service technician to ensure proper operation and safety.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| പൈലറ്റ് പ്രകാശിക്കില്ല |
|
|
| Pilot lights but main burner will not ignite |
|
|
| Fireplace produces odors |
|
|
If troubleshooting steps do not resolve the issue, contact a qualified service technician or ProCom customer support.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ProCom |
| മോഡലിൻ്റെ പേര് | ഇരട്ട ഇന്ധനം |
| ഇനം മോഡൽ നമ്പർ | PCS150T-1-AW |
| ഹീറ്റ് ഔട്ട്പുട്ട് | 15,000 ബ്രിട്ടീഷ് തെർമൽ യൂണിറ്റുകൾ (BTU) |
| ചൂടാക്കൽ കവറേജ് | 600 ചതുരശ്ര അടി വരെ. |
| ഇന്ധന തരം | പ്രകൃതി വാതകം (NG) അല്ലെങ്കിൽ ലിക്വിഡ് പ്രൊപ്പെയ്ൻ (LP) |
| കാര്യക്ഷമത | 99.9% Vent Free |
| നിയന്ത്രണ തരം | തെർമോസ്റ്റാറ്റ് നിയന്ത്രണം |
| ഇഗ്നിഷൻ തരം | Battery-assisted Piezo ignition |
| സുരക്ഷാ സവിശേഷതകൾ | ഓക്സിജൻ ഡിപ്ലീഷൻ സെൻസർ (ODS) |
| ഉൽപ്പന്ന അളവുകൾ | 12.5"D x 28"W x 36.5"H |
| ഇനത്തിൻ്റെ ഭാരം | 84.5 പൗണ്ട് |
| മെറ്റീരിയൽ | Wood (mantle), Concrete (logs) |
| നിറം | പുരാതന വെള്ള |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Burner, Log Set, Mantel |
| അസംബ്ലി ആവശ്യമാണ് | Yes (General assembly instructions provided) |
വാറൻ്റി വിവരങ്ങൾ
This ProCom Dual Fuel Ventless Gas Fireplace System is covered by a 1 വർഷത്തെ പരിമിത വാറൻ്റി. For specific terms and conditions, please refer to the warranty documentation included with your product or contact ProCom customer support.
ഉപഭോക്തൃ പിന്തുണ
For technical assistance, parts, or warranty claims, please contact ProCom customer support. Have your model number (PCS150T-1-AW) and purchase date available when contacting support.
നിർമ്മാതാവ്: ProCom
Refer to the product packaging or the official ProCom webഏറ്റവും പുതിയ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കായി സൈറ്റ്.