TC Electronic Hall of Fame 2 Mini Reverb Pedal User Manual

ആമുഖം

The TC Electronic Hall of Fame 2 Mini Reverb is an ultra-compact reverb pedal designed for electric guitars, featuring a groundbreaking MASH footswitch and new shimmer reverb algorithms. This manual provides essential information for setting up, operating, and maintaining your pedal.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

• Innovative pressure-sensitive MASH footswitch for real-time parameter control.
• Next-generation reverb algorithms, including the new Shimmer reverb.
• Dedicated knobs for Decay, Tone, and Mix for easy reverb fine-tuning.
• Compatibility with the free TonePrint App for beaming custom reverbs.

സജ്ജമാക്കുക

Follow these steps to connect your Hall of Fame 2 Mini Reverb pedal:

1. പവർ കണക്ഷൻ: Connect a standard 9V DC power supply (not included) to the power input jack on the side of the pedal. Ensure the power supply provides at least 100mA and has a center-negative polarity.
2. ഇൻപുട്ട് കണക്ഷൻ: Connect your guitar or other instrument to the 1/4-inch input jack on the right side of the pedal using a standard instrument cable.
3. ഔട്ട്പുട്ട് കണക്ഷൻ: Connect the 1/4-inch output jack on the left side of the pedal to your amplifier or the next pedal in your signal chain using a standard instrument cable.

Once all connections are made, the pedal is ready for operation.

പെഡൽ പ്രവർത്തിപ്പിക്കുന്നു

The Hall of Fame 2 Mini Reverb features three control knobs and a unique MASH footswitch:

• ഡെക്കേ നോബ്: Controls the length of the reverb tail. Turning it clockwise increases the decay time, making the reverb last longer.
• ടോൺ നോബ്: Adjusts the brightness or darkness of the reverb. Clockwise rotation brightens the reverb, while counter-clockwise rotation darkens it.
• മിക്സ് നോബ്: Determines the blend between your dry (unaffected) signal and the wet (reverb) signal. Fully counter-clockwise is dry signal only, fully clockwise is wet signal only.
• മാഷ് ഫുട്‌സ്വിച്ച്: This pressure-sensitive footswitch acts as an expression pedal. Pressing and holding the footswitch with varying pressure allows you to control specific reverb parameters in real-time, such as swell, modulation, or other dynamic effects, depending on the selected TonePrint. A quick tap toggles the effect on/off.

TonePrint Technology

The Hall of Fame 2 Mini Reverb supports TC Electronic's TonePrint technology. This allows you to load custom reverb sounds created by professional artists or design your own using the free TonePrint App (available for iOS, Android, Mac, and PC).

• Beaming TonePrints: Use the TonePrint App on your smartphone to "beam" TonePrints directly into your pedal via your guitar's pickup.
• USB കണക്ഷൻ: Connect the pedal to your computer via a mini-USB cable to access the TonePrint Editor for in-depth sound design and management.

മെയിൻ്റനൻസ്

To ensure the longevity and optimal performance of your Hall of Fame 2 Mini Reverb pedal, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
• സംഭരണം: നേരിട്ടുള്ള സൂര്യപ്രകാശം, തീവ്രമായ താപനില, ഉയർന്ന ഈർപ്പം എന്നിവയിൽ നിന്ന് മാറി തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് പെഡൽ സൂക്ഷിക്കുക.
• വൈദ്യുതി വിതരണം: Always use a regulated 9V DC, center-negative power supply with sufficient current (100mA minimum). Incorrect power can damage the unit.
• കണക്ഷനുകൾ: എല്ലാ കേബിൾ കണക്ഷനുകളിലും തേയ്മാനം സംഭവിച്ചിട്ടുണ്ടോയെന്ന് ഇടയ്ക്കിടെ പരിശോധിക്കുക. ജാക്കുകൾ പൊടിയും അവശിഷ്ടങ്ങളും ഇല്ലാത്തതാണെന്ന് ഉറപ്പാക്കുക.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Hall of Fame 2 Mini Reverb, refer to the following common problems and solutions:

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the official TC Electronic website or contact their customer service. You can also visit the official TC Electronic store on Amazon for additional product information and resources.

Visit TC Electronic Store on Amazon