സ്റ്റീൽമേറ്റ് 1 വെർട്ടിക്കൽ റീബാർ സ്റ്റെബിലൈസർ യൂസർ മാനുവൽ

ആമുഖം

The STEELMATE 1 Vertical Rebar Stabilizer is designed to ensure accurate and stabilized placement of vertical rebar, particularly when transitioning from a concrete foundation to a vertical wall. This product is engineered for durability and reusability, offering a time and cost-effective solution for construction projects.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

• Ideal for accurate placement of vertical rebar for foundation to wall construction.
• Durable and reusable design.
• Contributes to significant time and money savings.
• Provides the fastest method for accurately tying vertical rebar.

ഉൽപ്പന്നം കഴിഞ്ഞുview

Each STEELMATE unit is a robust, safety orange-colored component made of steel, designed to securely hold rebar in place. The unique design allows for use with various rebar sizes and is suitable for different construction methods.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The STEELMATE system is designed for quick and accurate installation of vertical rebar. Follow these steps for optimal results:

Measure and Install:

1. Measure for Rebar Layout: Use a 2x4 template to accurately measure and mark the rebar layout on your foundation. This ensures precise spacing for the vertical rebar.
2. Attach STEELMATE: Place the STEELMATE units onto the 2x4 template. The units are designed to fit securely.
3. Fasten All Tools: Securely fasten all STEELMATE units to the 2x4 template using 6D Duplex nails. This creates a stable and unified assembly.
4. Clamp Rebar in Place: Position the vertical rebar into the STEELMATE units and clamp them securely. Repeat this process for all necessary rebar placements.

STEELMATE is compatible with rebar sizes 3, 4, 5, 6, 7, and 8, providing versatility for various project requirements.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed, STEELMATE units provide a stable framework for pouring concrete, ensuring that vertical rebar remains straight and correctly positioned. This system is ideal for:

• Form & Pour construction.
• CMU (Concrete Masonry Unit) Block construction.
• ICF (Insulated Concrete Form) construction.

The system significantly reduces the time required for rebar setup, allowing for faster project completion and improved accuracy.

Maintenance and Reusability

STEELMATE units are designed for multiple uses, contributing to their cost-effectiveness. Proper removal ensures their longevity.

Removal and Reuse:

Individual Removal:

1. Remove 6D Duplex Nail: Carefully remove the 6D Duplex nail from the 2x4 template.
2. Use Hammer Claw: Use a hammer claw to lift off the STEELMATE tool from the rebar.

Template Removal:

1. Leave All Tools Fastened: Keep all STEELMATE units fastened to the 2x4 template.
2. Firmly Knock Off: Firmly knock off the entire 2x4 template with a hammer, ensuring all units detach cleanly.

After removal, clean any concrete residue from the STEELMATE units and store them in the provided bucket for future use. This practice ensures the tools remain in good condition for repeated applications.

ട്രബിൾഷൂട്ടിംഗ്

While STEELMATE is designed for straightforward use, here are some common considerations:

• Rebar Not Fitting Securely: Ensure you are using rebar sizes 3, 4, 5, 6, 7, or 8. Verify that the rebar is properly seated within the STEELMATE's hooks.
• Template Instability: Make sure the 6D Duplex nails are fully driven and the 2x4 template is stable on the foundation. Uneven surfaces can affect stability.
• Difficulty Removing Units: If units are difficult to remove, ensure all nails are extracted first. For template removal, a firm, even strike with a hammer should dislodge the assembly.
• Damage to Units: Inspect units for any damage before reuse. While durable, extreme force or improper handling can cause wear. Discard any visibly damaged units to maintain structural integrity.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി വിവരങ്ങൾ

Specific warranty details for the STEELMATE 1 Bucket of 40 Pcs. are not provided in the product information. For any warranty-related inquiries, please contact the manufacturer directly using the support information below.

പിന്തുണയും കോൺടാക്‌റ്റും

For further assistance, technical support, or product inquiries, please contact STEELMATE:

• നിർമ്മാതാവ്: സ്റ്റീൽമേറ്റ്
• Webസൈറ്റ്: www.steelmate.com
• വിലാസം: 4020 Palos Verdes Dr. North, Ste. 205, Rolling Hills Estates, CA 90274, USA
• ഉൽപ്പന്ന യുപിസി: 0860002591605

Please refer to the product's packaging or the official STEELMATE webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിവരങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കുമുള്ള സൈറ്റ്.