ഓൺ ഒഎൻഎ18TM003

ONN ONA18TM003 ഫുൾ മോഷൻ ടിവി മൗണ്ട് യൂസർ മാനുവൽ

മോഡൽ: ONA18TM003

1. ആമുഖം

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONN ONA18TM003 Full Motion TV Mount. This mount is designed to securely hold televisions ranging from 32 to 47 inches, offering full motion capability for optimal viewing angles and integrated cable management for a tidy setup. Please read all instructions carefully before beginning installation.

2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

WARNING: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

  • Do not install this product on walls that are not structurally sound. Ensure the mounting surface can support the combined weight of the mount and the television.
  • This mount is intended for use with televisions weighing up to the specified maximum load capacity. Exceeding this weight limit may result in instability and possible injury.
  • Always use the provided mounting hardware. If you are unsure about the type of hardware required for your wall, consult a professional.
  • ഇൻസ്റ്റാളേഷൻ സമയത്ത് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അകറ്റി നിർത്തുക.
  • എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമായി തുടരുന്നുവെന്ന് ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക.

3. പാക്കേജ് ഉള്ളടക്കം

Verify that all components are present and undamaged before installation. If any parts are missing or defective, do not proceed with installation and contact customer support.

  • വാൾ പ്ലേറ്റ് അസംബ്ലി
  • ടിവി ബ്രാക്കറ്റ് അസംബ്ലി
  • മൗണ്ടിംഗ് ഹാർഡ്‌വെയർ കിറ്റ് (സ്ക്രൂകൾ, ആങ്കറുകൾ, വാഷറുകൾ, സ്‌പെയ്‌സറുകൾ)
  • Built-in Leveler
  • ഇൻസ്ട്രക്ഷൻ മാനുവൽ
ONN ONA18TM003 Full Motion TV Mount components

ചിത്രം 1: കഴിഞ്ഞുview of the ONN ONA18TM003 Full Motion TV Mount, showing the wall plate, articulating arm, and TV bracket.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Professional installation is recommended. If you choose to install it yourself, ensure you have the necessary tools and follow these steps carefully.

4.1 ആവശ്യമായ ഉപകരണങ്ങൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല)

  • സ്റ്റഡ് ഫൈൻഡർ
  • ഉചിതമായ ഡ്രിൽ ബിറ്റുകൾ ഉപയോഗിച്ച് തുളയ്ക്കുക
  • സോക്കറ്റ് റെഞ്ച് അല്ലെങ്കിൽ ക്രമീകരിക്കാവുന്ന റെഞ്ച്
  • ഫിലിപ്സ് ഹെഡ് സ്ക്രൂഡ്രൈവർ
  • പെൻസിൽ
  • അളക്കുന്ന ടേപ്പ്

4.2 Attaching the Wall Plate to the Wall

  1. മൗണ്ടിംഗ് ലൊക്കേഷൻ നിർണ്ണയിക്കുക: Use a stud finder to locate the center of a wooden stud. Mark the desired height for the top of your TV. Ensure the location allows for full motion of the TV without obstruction.
  2. വാൾ പ്ലേറ്റിന്റെ സ്ഥാനം: Hold the wall plate assembly against the wall at the marked location. Use the built-in leveler to ensure it is perfectly horizontal. Mark the drill holes with a pencil.
  3. ഡ്രിൽ പൈലറ്റ് ദ്വാരങ്ങൾ: Drill pilot holes into the marked locations. For wood studs, use a 5/32 inch (4 mm) drill bit. For concrete or brick walls, use a 3/8 inch (10 mm) masonry drill bit and insert wall anchors (if provided and suitable for your wall type).
  4. സുരക്ഷിതമായ വാൾ പ്ലേറ്റ്: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten securely, but do not overtighten.

4.3 Attaching TV Brackets to the Television

  1. ടിവി സ്ക്രൂകൾ തിരഞ്ഞെടുക്കുക: Choose the correct diameter and length of screws that fit your TV's mounting holes. Refer to your TV's manual for VESA pattern and screw size. Use spacers if the TV back is uneven or if screws are too long.
  2. ബ്രാക്കറ്റുകൾ അറ്റാച്ചുചെയ്യുക: Carefully place your TV face down on a soft, clean surface. Align the TV bracket assembly with the mounting holes on the back of your TV. Secure the brackets using the selected screws and washers. Ensure the brackets are centered and level.

4.4 Hanging the Television on the Wall Mount

  1. ലിഫ്റ്റും ഹുക്കും: With assistance, carefully lift the television with the attached brackets. Hook the TV brackets onto the wall plate assembly.
  2. സുരക്ഷിത ടിവി: Locate the safety screws or locking mechanisms on the TV brackets. Tighten these to secure the TV to the wall mount, preventing accidental dislodgement.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The ONN ONA18TM003 mount offers flexible viewing options once installed.

5.1 ക്രമീകരിക്കുന്നു Viewing ആംഗിൾ

  • വിപുലീകരണം: Gently pull the TV away from the wall to extend the articulating arm.
  • സ്വിവൽ: Pivot the TV left or right to achieve your desired viewing ആംഗിൾ.
  • ടിൽറ്റ്: The mount may allow for vertical tilt adjustment. Loosen the tilt knobs (if present), adjust the TV to the desired angle, and re-tighten the knobs.
  • ലെവലിംഗ്: The built-in leveler helps ensure your TV is perfectly horizontal. Minor adjustments can be made if needed after installation.

5.2 കേബിൾ മാനേജ്മെന്റ്

Utilize the integrated cable management guides on the mount's arm to route and secure your TV cables. This helps maintain a clean appearance and prevents cables from interfering with the mount's movement.

6. പരിപാലനം

  • വൃത്തിയാക്കൽ: മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് മൗണ്ട് തുടയ്ക്കുക. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
  • ആനുകാലിക പരിശോധനകൾ: Periodically check all screws and connections to ensure they are tight and secure. Re-tighten if necessary.
  • ലൂബ്രിക്കേഷൻ: The articulating joints are designed for smooth operation. Avoid applying lubricants unless specifically instructed by the manufacturer.

7. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഇൻസ്റ്റാൾ ചെയ്തതിന് ശേഷം ടിവി ലെവൽ അല്ല.Wall plate not perfectly level; minor adjustment needed.Use the built-in leveler for fine adjustments. If significant, re-check wall plate installation.
Mount movement is stiff.Joints may need to be loosened slightly (if adjustable) or require break-in.Gently move the arm back and forth. Do not force. Check for any obstructions.
TV feels unstable.Mounting screws not fully tightened; TV weight exceeds capacity.Immediately remove TV. Re-check all wall and TV bracket connections. Ensure TV weight is within specifications. Contact a professional if unsure.

8 സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ്:ഒഎൻഎൻ
മോഡൽ:ഒഎൻഎ18TM003
അനുയോജ്യമായ ടിവി വലുപ്പങ്ങൾ:32 - 47 ഇഞ്ച്
മൗണ്ടിംഗ് തരം:മതിൽ മൗണ്ട്
ചലന തരം:Articulating / Full Motion
ഉൽപ്പന്ന അളവുകൾ (LxWxH):93.98 x 7.62 x 45.72 സെ.മീ (ഏകദേശം 37 x 3 x 18 ഇഞ്ച്)
ഇനത്തിൻ്റെ ഭാരം:3.68 കി.ഗ്രാം (ഏകദേശം. 8.11 പൗണ്ട്)
UPC:681131010856

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official ONN webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: Please refer to your product packaging or the ONN official webഏറ്റവും പുതിയ ഉപഭോക്തൃ പിന്തുണ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായുള്ള സൈറ്റ്.

അനുബന്ധ രേഖകൾ - ഒഎൻഎ18TM003

പ്രീview Onn 17LY80 ബ്ലൂടൂത്ത് ഇൻ-ഇയർ ഹെഡ്‌ഫോണുകളുടെ ഉപയോക്തൃ ഗൈഡ്
Onn 17LY80 ബ്ലൂടൂത്ത് ഇൻ-ഇയർ ഹെഡ്‌ഫോണുകൾ ഉപയോഗിക്കുന്നതിനുള്ള ഒരു സംക്ഷിപ്ത ഗൈഡ്, ചാർജിംഗ്, ജോടിയാക്കൽ, നിയന്ത്രണങ്ങൾ, ധരിക്കൽ, ട്രബിൾഷൂട്ടിംഗ്, FCC പാലിക്കൽ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ONN 17LY81 ബ്ലൂടൂത്ത് ഓൺ-ഇയർ ഹെഡ്‌ഫോണുകളുടെ ഉൽപ്പന്ന ഗൈഡ്
ചാർജിംഗ്, ബ്ലൂടൂത്ത് കണക്ഷൻ, മ്യൂസിക് പ്ലേബാക്ക്, പവർ ഫംഗ്‌ഷനുകൾ, കോളിംഗ്, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്ന ONN 17LY81 ബ്ലൂടൂത്ത് ഓൺ-ഇയർ ഹെഡ്‌ഫോണുകൾക്കായുള്ള ഉപയോക്തൃ ഗൈഡ്.
പ്രീview Onn VIZIO OS ഓപ്പറേറ്റിംഗ് സിസ്റ്റം മാനുവൽ
VIZIO OS നൽകുന്ന നിങ്ങളുടെ Onn സ്മാർട്ട് ടിവി സജ്ജീകരിക്കുന്നതിനും പ്രവർത്തിപ്പിക്കുന്നതിനുമുള്ള സമഗ്രമായ ഒരു ഗൈഡ്. ഈ മാനുവലിൽ ആദ്യ തവണ സജ്ജീകരണം, Wi-Fi-യിലേക്ക് കണക്റ്റുചെയ്യൽ, ബ്ലൂടൂത്ത് ഉപകരണങ്ങൾ ജോടിയാക്കൽ, WatchFree+ പോലുള്ള VIZIO OS സവിശേഷതകൾ നാവിഗേറ്റ് ചെയ്യൽ, പൊതുവായ പ്രശ്നങ്ങൾ പരിഹരിക്കൽ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview 13-32 ഇഞ്ച് ടിൽറ്റിംഗ് ടിവി വാൾ മൗണ്ട് ONA16TM008 ഉൽപ്പന്ന ഗൈഡ്
ഓണ്‍ 13-32 ഇഞ്ച് ടിൽറ്റിംഗ് ടിവി വാൾ മൗണ്ടിനായുള്ള വിശദമായ ഉൽപ്പന്ന ഗൈഡ് (മോഡൽ: ONA16TM008). സുരക്ഷാ നിർദ്ദേശങ്ങൾ, ഭാഗങ്ങളുടെ പട്ടിക, അളവുകൾ, വുഡ് സ്റ്റഡ്, കോൺക്രീറ്റ് ഭിത്തികൾക്കുള്ള ഘട്ടം ഘട്ടമായുള്ള ഇൻസ്റ്റാളേഷൻ നിർദ്ദേശങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview ONN സ്വിവൽ ടിവി ബേസ് 32-65 ഇഞ്ച് ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്
32-65 ഇഞ്ച് ടിവികൾക്ക് അനുയോജ്യമായ, ONN സ്വിവൽ ടിവി ബേസിനായുള്ള ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ, VESA പാറ്റേൺ അനുയോജ്യത, ഭാര പരിധികൾ, വാറന്റി വിവരങ്ങൾ, പാർട്സ് ലിസ്റ്റ് എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ഓൺ പ്രോ എക്സ്-ലാർജ് ബൂംബോക്സ് ഉപയോക്തൃ ഗൈഡ്
ഓൺ പ്രോ എക്സ്-ലാർജ് ബൂംബോക്‌സിനായുള്ള ഉപയോക്തൃ ഗൈഡ്, സവിശേഷതകൾ, പ്രവർത്തനം, സുരക്ഷാ മുൻകരുതലുകൾ, വൃത്തിയാക്കൽ, സ്പെസിഫിക്കേഷനുകൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.