1. ആമുഖം
The DAB FEKA 300 MA is a robust submersible pump designed for efficient drainage and lifting of clear, grey, or rainwater in various settings, including domestic and residential environments. This pump is capable of handling moderately dirty water containing solids up to 25mm in diameter. Its versatile design makes it suitable for both fixed and mobile installations. The FEKA 300 MA features an integrated float switch for automatic operation and is engineered to run dry for up to 1 minute without damage.
2 സുരക്ഷാ വിവരങ്ങൾ
- Always disconnect the pump from the power supply before any installation, maintenance, or cleaning operations.
- Ensure the power cable is intact and free from damage. Do not use the pump if the cable is damaged.
- പമ്പ് ശരിയായി നിലത്തിരിക്കണം.
- Do not operate the pump in explosive atmospheres or with flammable liquids.
- കുട്ടികളെയും അനധികൃത വ്യക്തികളെയും പ്രവർത്തന മേഖലയിൽ നിന്ന് അകറ്റി നിർത്തുക.
- Ensure the pump is fully submerged during operation to prevent overheating, except for the specified 1-minute dry run capability.
3. സജ്ജീകരണം
- അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the pump and all accessories from the packaging. Inspect for any signs of damage.
- ഡിസ്ചാർജ് കണക്ഷൻ: Connect a suitable discharge hose to the pump's outlet. Ensure a secure, watertight connection. The pump is designed with a discharge outlet for easy hose attachment.
- ഫ്ലോട്ട് സ്വിച്ച് ക്രമീകരണം: The pump features an integrated float switch for automatic operation. Adjust the cable length of the float switch to set the desired start and stop levels for the pump. The pump will start when the water level rises and lift the float, and stop when the water level drops and the float falls.
- പ്ലേസ്മെൻ്റ്: Place the pump on a stable, flat surface in the area to be drained. Ensure the suction grille is clear of obstructions.
- പവർ കണക്ഷൻ: Connect the pump to a suitable power outlet. Ensure the power supply matches the pump's requirements (230V ~ 50Hz).
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- യാന്ത്രിക പ്രവർത്തനം: Once connected to power and placed in water, the pump will automatically start when the water level reaches the activation point of the float switch. It will continue to pump until the water level drops below the deactivation point.
- Manual Operation (if applicable): If your model supports manual operation (without a float switch or with a manual override), ensure the pump is continuously monitored to prevent dry running for extended periods.
- നിരീക്ഷണം: Periodically check the pump's operation and the water level to ensure proper functioning.
5. പരിപാലനം
- പതിവ് വൃത്തിയാക്കൽ: Periodically clean the pump's suction grille to remove any debris, leaves, or solids that may obstruct water intake.
- പരിശോധന: Regularly inspect the power cable, float switch, and pump body for any signs of wear, damage, or corrosion.
- ശൈത്യകാല സംഭരണം: If storing the pump for an extended period, especially in freezing temperatures, ensure it is thoroughly cleaned, drained of all water, and stored in a dry, frost-free location.
- പ്രൊഫഷണൽ സേവനം: For any internal repairs or complex issues, contact a qualified service technician.
6. പ്രശ്നപരിഹാരം
- പമ്പ് ആരംഭിക്കുന്നില്ല: Check the power supply, ensure the plug is securely inserted, and verify that the float switch is not stuck in the 'off' position (if applicable).
- Pump runs but no water is discharged: Check for blockages in the suction grille or discharge hose. Ensure the water level is sufficient for the pump to operate.
- Reduced flow rate: Clean the suction grille and check the discharge hose for kinks or partial blockages.
- Pump stops unexpectedly: Check for thermal overload protection activation (allow to cool down). Verify the float switch position.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| നിർമ്മാതാവ് | DAB പമ്പുകൾ |
| മോഡൽ നമ്പർ | FEKA 300 |
| ഉൽപ്പന്ന അളവുകൾ | 18.9 x 30.3 x 32.9 സെ.മീ |
| ഇനത്തിൻ്റെ ഭാരം | 4.6 കിലോഗ്രാം |
| നിറം | കറുപ്പ് / പച്ച |
| ശൈലി | മുങ്ങിപ്പോകാവുന്ന |
| Material (Pump Body) | ടെക്നോപോളിമർ |
| Material (Motor Casing/Shaft) | AISI 304 Stainless Steel / AISI 431 Steel |
| പവർ ഉറവിടം | കോർഡഡ് ഇലക്ട്രിക് |
| Flow Rate (Min/Max) | 1 m³/h to 16 m³/h |
| പരമാവധി തല | 7.5 മീറ്റർ |
| പരമാവധി നിമജ്ജന ആഴം | 7 Meters (with adequate cable length) |
| ലിക്വിഡ് തരം | Wastewater, Dirty Water, Rainwater |
| Free Passage for Solids | 25 മി.മീ |
| Minimum Suction Level | 38 മി.മീ |
| Liquid Temperature (Domestic Use) | +0 ° C മുതൽ + 35 ° C വരെ |
| Liquid Temperature (Other Uses) | +0 ° C മുതൽ + 50 ° C വരെ |
| മോട്ടോർ സംരക്ഷണ റേറ്റിംഗ് | IP 68 |
8. വാറൻ്റിയും പിന്തുണയും
Specific warranty details and support contact information are typically provided with the product packaging or on the manufacturer's official website. Please refer to the documentation included with your purchase for precise warranty terms and conditions. For technical assistance or service inquiries, contact DAB PUMPS customer support.
9. ഉൽപ്പന്ന വീഡിയോകൾ
No relevant product videos from the seller were found for this specific model in the provided data. Please refer to the manufacturer's webലഭ്യമായ വീഡിയോ ഉറവിടങ്ങൾക്കായുള്ള സൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പേജ്.
