ആമുഖം
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Poolex PC-NAN heat pump. The Poolex Nano heat pump is specifically designed for small pools and offers efficient heating with a high Coefficient of Performance (COP) similar to larger heat pumps.
സുരക്ഷാ വിവരങ്ങൾ
Please read all safety warnings and instructions carefully before installing and operating this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- ഏതെങ്കിലും അറ്റകുറ്റപ്പണികൾ അല്ലെങ്കിൽ സേവനം നടത്തുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും വൈദ്യുതി വിച്ഛേദിക്കുക.
- Ensure the electrical system is safe and properly grounded.
- ഏതെങ്കിലും ഭാഗത്തിന് കേടുപാടുകൾ സംഭവിച്ചാൽ യൂണിറ്റ് പ്രവർത്തിപ്പിക്കരുത്.
- പ്രവർത്തന സമയത്ത് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും യൂണിറ്റിൽ നിന്ന് അകറ്റി നിർത്തുക.
- Installation must be performed by a qualified professional in accordance with local regulations.
സജ്ജമാക്കുക
The Poolex PC-NAN heat pump is designed for easy installation.
അൺപാക്കിംഗും പ്ലേസ്മെന്റും
Carefully remove the heat pump from its packaging. Ensure all components are present. Place the unit on a stable, level surface near your pool, allowing adequate air circulation around the unit.

ചിത്രം: മുൻഭാഗം view of the Poolex PC-NAN heat pump, showing the fan grille, control panel, and water inlet/outlet connections.
വൈദ്യുതി ബന്ധം
Connect the heat pump to a conventional electrical socket. The unit comes with a 5-meter power cable equipped with 10mA differential protection for enhanced safety.

Image: Close-up of the 5-meter power cable with integrated differential protection.
ജല കണക്ഷനുകൾ
Connect the heat pump to your pool's filtration system using the provided PVC connectors (Ø 32-38). Ensure all connections are secure and leak-free.

Image: A set of PVC connectors and clamps used for connecting the heat pump to the pool's water circulation system.

Image: An outdoor scene showing the Poolex PC-NAN heat pump connected to a small, above-ground wooden pool, demonstrating a typical setup.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
പ്രാരംഭ ആരംഭം
Once all connections are secure and the pool's filtration system is running, plug in the heat pump. The unit will begin to heat the pool water.
താപനില നിയന്ത്രണം
The heat pump is designed to efficiently raise your pool's temperature. Allow several hours for the water to reach the desired temperature, depending on the pool volume and initial water temperature.

Image: A graphic highlighting the 3000W heating capacity and 600W consumption of the Poolex PC-NAN heat pump, indicating its efficiency.
Economic and Quiet Operation
The Poolex PC-NAN is designed to be economical and quiet during operation, making it suitable for residential use.
മെയിൻ്റനൻസ്
Regular maintenance ensures optimal performance and longevity of your heat pump.
- Keep the area around the heat pump clear of debris to ensure proper airflow.
- ഇടയ്ക്കിടെ യൂണിറ്റിന്റെ പുറംഭാഗം മൃദുവായ, ഡി-ക്ലാസ്സർ ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp തുണി.
- Inspect water connections for leaks and tighten if necessary.
- During winterization, follow specific instructions for draining and storing the unit to prevent frost damage.
ട്രബിൾഷൂട്ടിംഗ്
യൂണിറ്റ് ഓണാക്കുന്നില്ല
- പവർ കണക്ഷൻ പരിശോധിച്ച് പ്ലഗ് പൂർണ്ണമായും സോക്കറ്റിൽ ചേർത്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Verify that the differential protection on the power cable has not tripped. Reset if necessary.
- Ensure there is power to the electrical outlet.
അപര്യാപ്തമായ താപനം
- Check if the pool's filtration system is running, as the heat pump requires water flow to operate.
- Verify that the ambient air temperature is within the operating range for the heat pump.
- Ensure the heat pump is appropriately sized for your pool volume.
അസാധാരണമായ ശബ്ദങ്ങൾ
- Check for any obstructions in the fan or around the unit.
- Ensure the unit is placed on a stable and level surface to minimize vibrations.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | PC-NAN020 |
| വലിപ്പം | 3000 വാട്ട്സ് |
| മെറ്റീരിയൽ തരം | ഉരുക്ക് |
| ബാഹ്യ മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| ബ്രാൻഡ് | പൂലെക്സ് |
| നിർമ്മാതാവ് | പൂൾസ്റ്റാർ |
| ASIN | B084MLDVVZ |
| ആദ്യം ലഭ്യമായത് | 19. ഫെബ്രുവരി 2020 |
വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please refer to the official POOLEX webനിങ്ങളുടെ സൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ പ്രാദേശിക വിതരണക്കാരനെ ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
A detailed installation and usage manual is included with your product to provide further guidance.





