RAMUC EP എപ്പോക്സി ഹൈ ഗ്ലോസ് എപ്പോക്സി പൂൾ പെയിന്റ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ആമുഖം

This manual provides comprehensive instructions for the proper use and application of RAMUC EP Epoxy High Gloss Epoxy Pool Paint. This two-part epoxy coating is designed for durability and a high-gloss finish on pool surfaces. Please read all instructions carefully before beginning your project to ensure optimal results and safety.

This image displays two cans of RAMUC EP Epoxy Pool Paint. The top can is labeled 'Part A' and indicates a volume of 1 Gallon (3.785 Liters). The bottom can is labeled 'Part B' and indicates a volume of 0.33 Gallon (1.25 Liters). Both cans feature the 'Pool Paint' and 'TYPE EP Epoxy Pool Paint' branding, with a graphic of a person swimming in a pool on the upper can.

സുരക്ഷാ വിവരങ്ങൾ

Always prioritize safety when working with paints and chemicals. RAMUC EP Epoxy Pool Paint contains combustible liquid and vapor and can be harmful if swallowed. Adhere to the following safety guidelines:

• ജോലിസ്ഥലത്ത് ആവശ്യത്തിന് വായുസഞ്ചാരം ഉറപ്പാക്കുക.
• Wear appropriate personal protective equipment (PPE), including gloves, eye protection, and a respirator.
• ചൂട്, തീപ്പൊരി, തുറന്ന തീജ്വാലകൾ, ചൂടുള്ള പ്രതലങ്ങൾ എന്നിവയിൽ നിന്ന് അകറ്റി നിർത്തുക. പുകവലി പാടില്ല.
• വിഴുങ്ങരുത്. വിഴുങ്ങിയാൽ ഉടൻ വൈദ്യസഹായം തേടുക.
• കുട്ടികൾക്കും വളർത്തുമൃഗങ്ങൾക്കും ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• Refer to the product's Safety Data Sheet (SDS) for detailed safety information.

തയ്യാറാക്കൽ

Proper surface preparation is critical for the adhesion and longevity of the paint. This product is recommended for tile surfaces and is suitable for interior pool applications.

ഉപരിതല ശുചീകരണം:

• Drain the pool completely.
• Remove all loose paint, dirt, grease, oil, and other contaminants from the pool surface.
• Clean the surface thoroughly with a suitable cleaner and rinse completely with fresh water. Allow to dry fully.
• For previously painted surfaces, ensure compatibility with epoxy paint. Sand or abrade existing coatings to provide a profile for new paint adhesion.

Surface Repair:

• Repair any cracks, chips, or imperfections in the pool surface using appropriate patching compounds. Allow repairs to cure fully according to manufacturer's instructions.

Drying Conditions:

• Ensure the pool surface is completely dry before painting. Moisture can compromise paint adhesion.
• Avoid painting in direct sunlight or when surface temperatures are extremely hot or cold. Ideal application temperatures are typically between 50°F (10°C) and 90°F (32°C).

സജ്ജമാക്കുക

RAMUC EP Epoxy Pool Paint is a two-component system that requires proper mixing before application.

മിക്സിംഗ് നിർദ്ദേശങ്ങൾ:

1. Open Part A and Part B cans.
2. Pour the entire contents of Part B into the Part A container.
3. Mix thoroughly with a mechanical mixer for at least 3-5 minutes until a uniform color and consistency are achieved. Scrape the sides and bottom of the can to ensure all material is incorporated.
4. Allow the mixed paint to "induct" or "sweat-in" for 30 minutes before use. This allows the chemical reaction to begin.
5. Once mixed, the pot life of the paint is limited. Work quickly and only mix as much paint as can be applied within the recommended pot life (refer to product label for specific times, typically 4-8 hours depending on temperature).

ഉപകരണങ്ങളും വസ്തുക്കളും:

• RAMUC EP Epoxy Pool Paint (Part A & B)
• Mechanical mixer or drill with mixing paddle
• Applicators (rollers, brushes, or spray equipment) - Applicators are included with the product.
• വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (PPE)
• Cleaning solvents (e.g., xylene or lacquer thinner for cleanup)

Operating (Application)

Apply the paint evenly to achieve the best finish and protection.

അപേക്ഷാ രീതി:

• Apply the first coat of paint using a roller, brush, or airless spray equipment. Ensure even coverage.
• The coverage rate is approximately up to 450 sq. ft. per gallon, depending on surface porosity and texture.
• Allow the first coat to dry for the recommended recoat time (typically 8-24 hours, but check product label for exact times based on temperature and humidity). The surface should be tack-free before applying the second coat.
• Apply a second coat following the same procedure as the first. Two coats are generally recommended for optimal durability and appearance.
• Maintain consistent film thickness for a uniform finish.

ക്യൂറിംഗ് സമയം:

• Do not fill the pool until the paint has fully cured. This typically takes 5-7 days, but can vary with temperature and humidity. Refer to the product label for precise curing times.
• Premature filling can lead to blistering, poor adhesion, and reduced paint life.

മെയിൻ്റനൻസ്

Proper maintenance will extend the life and appearance of your RAMUC EP Epoxy Pool Paint.

• Regularly clean the pool surface to prevent algae and mineral buildup. Use non-abrasive pool cleaning tools and chemicals.
• Maintain proper pool water chemistry. Imbalanced pH or high chlorine levels can degrade paint over time.
• Inspect the paint annually for any signs of wear, blistering, or peeling. Address small issues promptly to prevent larger problems.
• When repainting is necessary, follow the preparation and application instructions carefully.

ട്രബിൾഷൂട്ടിംഗ്

This section addresses common issues that may arise during or after painting.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

Specific warranty information for RAMUC EP Epoxy High Gloss Epoxy Pool Paint is typically provided on the product packaging or through the manufacturer's official channels. Please refer to the product label for any explicit warranty details.

For technical support, product inquiries, or assistance with application, please contact RAMUC directly:

• നിർമ്മാതാവ്: RAMUC
• Webസൈറ്റ്: www.ramucpaint.com (കുറിപ്പ്: ഇതൊരു പ്ലെയ്‌സ്‌ഹോൾഡറാണ് URL, please verify the official RAMUC website for accurate contact information.)
• കസ്റ്റമർ സർവീസ്: നിർമ്മാതാവിന്റെ webഫോൺ നമ്പറുകൾക്കോ ​​ഇമെയിൽ കോൺടാക്റ്റുകൾക്കോ ​​ഉള്ള സൈറ്റ്.