EDUP PCI-E WiFi 6 Network Card AX1800Mbps Bluetooth 5.2 User Manual

ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EDUP PCI-E WiFi 6 Network Card. This advanced network card integrates WiFi 6 (802.11AX) technology with Bluetooth 5.2, offering high-speed wireless connectivity and enhanced performance for desktop computers running Windows 10/11 64-bit.

Image: The EDUP PCI-E WiFi 6 Network Card, featuring a black heatsink and two external antennas.

പ്രധാന സവിശേഷതകൾ

• വൈഫൈ 6 സാങ്കേതികവിദ്യ: Optimized power consumption and coverage, supporting multi-user high-speed concurrency for improved performance in user-intensive scenarios. Offers longer transmission distances, higher transmission rates, low latency, and high access count.
• MTK7921LEN Chipset: Utilizes the new generation MTK7921LEN chip, supporting 2.4GHz/5.8GHz dual band. The 5.8GHz band can reach speeds of up to 1200Mbps, and the 2.4GHz band up to 600Mbps. Backward compatible with IEEE 802.11 ac/b/g/n.
• ബ്ലൂടൂത്ത് 5.2 സാങ്കേതികവിദ്യ: Expands Bluetooth signal range by 4x, ensuring strong signal reception throughout your space. Facilitates faster transfer of large files and seamless connection with various Bluetooth devices such as mice, earphones, and keyboards.
• ഓപ്പറേറ്റിംഗ് സിസ്റ്റം പിന്തുണ: Exclusively supports Windows 10 64-bit and Windows 11 64-bit for desktop computers.
• Heat Sink Design: Integrated heat sink ensures optimal performance and stable temperatures for the Intel AX210 6e SoC chip, especially during high data rates.

Image: Comparison showing WiFi 6 speeds up to 1800Mbps versus WiFi 5 at 1200Mbps.

Image: Diagram illustrating Bluetooth 5.2's 2x faster speeds, 4x broader range, and 8x throughput compared to previous generations.

പാക്കേജ് ഉള്ളടക്കം

• 1x EDUP PCI-E WiFi 6 Network Card (EP-9658GS)
• 2x High Gain Antennas
• 1x Bluetooth Cable (9-pin USB)
• 1x ലോ പ്രോfile ബ്രാക്കറ്റ്
• 1x സ്ക്രൂ ഡ്രൈവർ
• ഇൻസ്റ്റാളേഷനുള്ള സ്ക്രൂകൾ
• 1x Driver CD (Note: Drivers can also be downloaded from the official webസൈറ്റ്)

Image: All components included in the product package, including the network card, antennas, Bluetooth cable, low profile bracket, screwdriver, and driver CD.

ഇൻസ്റ്റലേഷൻ ഗൈഡ്

Follow these steps carefully to install your EDUP PCI-E WiFi 6 Network Card into your desktop computer.

ഹാർഡ്‌വെയർ ഇൻസ്റ്റാളേഷൻ

1. ബ്ലൂടൂത്ത് കേബിൾ ബന്ധിപ്പിക്കുക: Connect the white end of the Bluetooth 9-pin cable to the corresponding port on the PCIe card. Ensure a secure connection.

   

   ചിത്രം: ക്ലോസ്-അപ്പ് view of the Bluetooth cable being connected to the white port on the PCIe network card.

2. Insert Network Card: Carefully insert the PCIe network card into an available PCI Express slot (e.g., PCIe x1, x4, x8, or x16) on your motherboard. Press firmly until it is fully seated.

   

   Image: The EDUP network card installed in a desktop computer's PCIe slot, with antennas attached.

3. Connect USB Cable to Motherboard: Insert the USB end of the 9-pin Bluetooth cable into a 9-pin USB header (often labeled F_USB or USB2.0) on your motherboard. This connection is essential for the Bluetooth function to work.

   

   Image: A hand connecting the 9-pin USB end of the Bluetooth cable to a USB header on the motherboard.

4. ബ്രാക്കറ്റ് സുരക്ഷിതമാക്കുക: Twist the screws on the bracket to securely fix the network card in place within your PC case.

5. ആൻ്റിനകൾ അറ്റാച്ചുചെയ്യുക: Screw on the two high-gain antennas to the connectors on the back of the network card. Adjust them to the best angle for optimal signal reception.

ഡ്രൈവർ ഇൻസ്റ്റാളേഷൻ

After hardware installation, you need to install the necessary drivers for WiFi and Bluetooth functionality.

1. ഡ്രൈവറുകൾ ഡൗൺലോഡ് ചെയ്യുക: Visit the official EDUP webസൈറ്റ്: https://www.szedup.com/. Navigate to "Support" -> "Download Center" -> "PCIE Card" and download the driver for model EP-9658GS (or the appropriate driver for your specific model, often labeled 9655GS driver).

2. അൺസിപ്പ് ചെയ്യുക Files: Use a compression tool (e.g., WinRAR, 7-Zip) to unzip the downloaded driver file.

3. ഡ്രൈവറുകൾ ഇൻസ്റ്റാൾ ചെയ്യുക: കണ്ടെത്തി ക്ലിക്ക് ചെയ്യുക setup.exe files within the unzipped folders for both WiFi and Bluetooth to begin the installation process. Follow the on-screen prompts.

4. Verify Installation (Device Manager): Open Device Manager (Right-click "This PC" -> "Manage" -> "Device Manager") to check if the hardware is recognized and the drivers are installed correctly.

   • If a "Network Controller" with a yellow exclamation mark appears, right-click it, select "Update driver," and choose to browse your computer for driver software. Navigate to the unzipped driver folder (e.g., C drive path where you extracted the drivers).
   • Once installed, the WiFi adapter should be displayed as "MediaTek Wi-Fi 6/6E Wireless LAN Card" under "Network adapters."
   • For Bluetooth, right-click the "Generic Bluetooth Adapter" (or similar) under "Bluetooth" and select "Update driver." After successful installation, it should be displayed as "MediaTek Bluetooth Adapter."

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the drivers are successfully installed, your EDUP network card is ready for use.

• വൈഫൈയിലേക്ക് കണക്റ്റുചെയ്യുന്നു:

  Click on the Wi-Fi icon in your system tray (usually bottom-right corner of the screen). Select your desired Wi-Fi network (2.4GHz or 5GHz band) from the list and enter the password to connect. The card supports WLAN 6 for optimal performance.

  

  Image: A user interacting with a computer, demonstrating the use of the WiFi 6 card for high-speed internet access.

• ബ്ലൂടൂത്ത് ഉപയോഗിക്കുന്നത്:

  Ensure the 9-pin USB cable is correctly connected to both the card and the motherboard. Go to your computer's Bluetooth settings (Settings > Devices > Bluetooth & other devices) to pair and connect your Bluetooth devices such as headphones, speakers, keyboards, or mice.

  

  Image: Diagram showing various devices like printers, keyboards, mice, phones, and audio devices connecting via Bluetooth 5.2 to a PC with the EDUP network card.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your EDUP PCI-E WiFi 6 Network Card, refer to the following common solutions:

• Q1: How to use the Bluetooth function?

  A1: Please insert the USB 9-pin cable that comes with the package into the USB 9-pin port of the motherboard. Also, install the Bluetooth driver.
• Q2: Bluetooth is not working, what should I do?

  A2: Please check whether the Bluetooth 9-pin cable is inserted into the 9-pin USB port of the motherboard, and the white end is connected to the PCIe card. Then install the Bluetooth driver.

• Q3: The Bluetooth works fine, but there is no Wi-Fi?

  A3:

  1. First, check whether the device Wi-Fi is recognized by the computer in the Device Manager. If a network controller with a yellow exclamation mark appears, install the Wi-Fi driver. If the driver is installed, and the yellow warning is still displayed, right-click, click "Update," and select the C drive path to manually update.
  2. Check whether there is an M.2 hard disk on the motherboard, which may cause a hardware function conflict. M.2 hardware in parallel channel needs to be unplugged.
  3. You may need to enter the BIOS to set some options for PCIe.
• Q4: Does it not recognize after a period of use or the Wi-Fi speed is slow?

  A4: You can try different things by plugging the device into different PCIe slots.

• Q5: Can't connect to 5G?

  A5: Insert into different PCIe slots for testing.

• Driver Installation Tips: If the CD cannot be used, please contact EDUP support to get the driver via Amazon message.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the official EDUP webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. PDF ഫോർമാറ്റിലുള്ള വിശദമായ ഒരു ഉപയോക്തൃ മാനുവൽ ഡൗൺലോഡ് ചെയ്യാൻ ലഭ്യമാണ്:

ഉപയോക്തൃ മാനുവൽ (PDF) ഡൗൺലോഡ് ചെയ്യുക

നിങ്ങൾക്ക് സന്ദർശിക്കാനും കഴിയും EDUP Store on Amazon കൂടുതൽ ഉൽപ്പന്ന വിവരങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കും.