ആമുഖം
The eBikeling Pedal Assist Sensor (PAS) is designed to seamlessly integrate with your electric bicycle, providing efficient and eco-friendly pedal assistance. This accessory transforms your conventional bike into a high-performance e-bike by activating the motor based on your pedaling input. It is universally compatible with most electric bikes and is crafted from high-quality, durable materials to ensure reliable operation and resistance to impacts and dust.
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your eBikeling PAS.
പാക്കേജ് ഉള്ളടക്കം
Image: All components of the eBikeling Pedal Assist Sensor kit, including the sensor unit, the magnetic disc (split into two halves), and zip ties for installation.
- Pedal Assist Sensor (PAS) Unit
- Magnetic Disc (split for easy installation)
- Mounting Zip Ties
- Metal Ring (for securing the magnetic disc)
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The eBikeling PAS is designed for easy installation. Follow these steps carefully to ensure proper function.
- നിങ്ങളുടെ സൈക്കിൾ തയ്യാറാക്കുക: Ensure your bicycle is stable, preferably on a stand. You may need to remove the left crank arm to install the magnetic disc.
- Install the Magnetic Disc:
Image: The magnetic disc and the sensor unit, showing how they interact. The disc has multiple magnets embedded.
The magnetic disc is split into two halves for convenient installation without removing the bottom bracket. Place the two halves of the magnetic disc around the bicycle's bottom bracket spindle, ensuring the magnets face outwards towards where the sensor will be mounted. Secure the two halves together using the provided metal ring or by snapping them firmly into place if designed to do so.
- Mount the PAS Sensor Unit:
Image: The eBikeling PAS sensor unit mounted on the bicycle frame, adjacent to the magnetic disc on the crank arm.
Position the PAS sensor unit on the bicycle frame, typically near the bottom bracket, so that it is in close proximity to the magnetic disc. The sensor should be aligned with the magnets on the disc, allowing for accurate detection of pedal rotation. Use the provided zip ties to securely fasten the sensor unit to the frame. Ensure the sensor is stable and does not interfere with pedaling or chain movement.
- വയറിംഗ് ബന്ധിപ്പിക്കുക:
ചിത്രം: വിശദമായ ഒരു ചിത്രം view of the PAS sensor's cable and its waterproof connector, ready for connection to the e-bike controller.
Locate the PAS input port on your e-bike controller. Connect the cable from the eBikeling PAS sensor unit to this port. Ensure the connection is firm and secure. Most eBikeling kits use waterproof connectors; align the pins correctly before pushing them together. Route the cable neatly along the frame, securing it with additional zip ties if necessary, to prevent snagging or damage.
- ഇൻസ്റ്റലേഷൻ പരിശോധിക്കുക: After installation, manually rotate the pedals to ensure the magnetic disc spins freely and the sensor detects the rotation. If your e-bike display shows a PAS level or motor activation, the installation is successful.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The eBikeling PAS works by detecting your pedaling motion and signaling the e-bike controller to provide motor assistance. Here’s how to operate your e-bike with the PAS installed:
- സജീവമാക്കൽ: The PAS system typically activates automatically when you begin pedaling forward. There is no on/off switch directly on the sensor itself.
- Pedal Assistance Levels: Your e-bike's display or control panel will allow you to select different levels of pedal assistance (e.g., 1-5). Higher levels provide more motor power for less pedaling effort.
- നിർജ്ജീവമാക്കൽ: The motor assistance will typically cease when you stop pedaling, apply the brakes, or reach the maximum assisted speed set by your e-bike system. You can also deactivate assistance via your e-bike's display buttons.
- സുഗമമായ പ്രവർത്തനം: For the smoothest experience, pedal consistently. The PAS sensor provides feedback from the pedals to the controller, which then assists with electric power based on the selected level.
മെയിൻ്റനൻസ്
The eBikeling PAS sensor is designed to be durable and low-maintenance. However, regular checks can prolong its lifespan and ensure optimal performance.
- വൃത്തിയായി സൂക്ഷിക്കു: Periodically wipe down the sensor unit and magnetic disc to remove dirt, dust, and debris. While designed to resist dust buildup, excessive grime can interfere with sensor readings.
- കണക്ഷനുകൾ പരിശോധിക്കുക: Ensure all cable connections are secure and free from corrosion. Loose connections can lead to intermittent or no pedal assistance.
- കേടുപാടുകൾക്കായി പരിശോധിക്കുക: Regularly check the sensor unit, magnetic disc, and cables for any signs of physical damage, cracks, or fraying. Replace any damaged components immediately.
- സെൻസർ വിന്യാസം: Verify that the sensor unit remains properly aligned with the magnetic disc. If it shifts, gently reposition it and re-secure the zip ties.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your eBikeling PAS, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| No pedal assist / PAS not working |
|
|
| Intermittent pedal assist |
|
|
| Motor continues to assist after stopping pedaling |
|
|
സ്പെസിഫിക്കേഷനുകൾ
- മോഡലിൻ്റെ പേര്: A-PAS
- ഭാഗം നമ്പർ: A-EZPAS_CB
- ബ്രാൻഡ്: EBIKELING
- മെറ്റീരിയൽ: പ്ലാസ്റ്റിക്
- ഇനത്തിൻ്റെ ഭാരം: 0.07 കിലോഗ്രാം
- പാക്കേജ് അളവുകൾ: 4.49 x 3.46 x 1.14 ഇഞ്ച്
- അനുയോജ്യത: Universal with most pedal-assisted electric bicycle drive systems
- Assist Ratio: 1:1 power assist
- ഡിസൈൻ: Compact, lightweight, durable, impact-resistant, dust-resistant
വാറൻ്റിയും പിന്തുണയും
The eBikeling Pedal Assist Sensor (PAS) comes with a 2 വർഷത്തെ വാറൻ്റി from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or improper installation.
For technical support, warranty claims, or any questions regarding your eBikeling product, please contact EBIKELING customer service. You can find more information and contact details on the official EBIKELING store page: EBIKELING Store on Amazon.
