moofit HR6 Heart Rate Monitor Chest Strap User Manual

1. ആമുഖം

The moofit HR6 Heart Rate Monitor Chest Strap is designed to provide accurate, real-time heart rate and calorie consumption data during your workouts. Featuring both Bluetooth and ANT+ connectivity, it offers broad compatibility with a wide range of fitness devices and applications, helping you optimize your training and achieve your fitness goals.

This manual provides detailed instructions on how to set up, operate, and maintain your moofit HR6 heart rate monitor, along with important safety information and troubleshooting tips.

Figure 1: moofit HR6 Heart Rate Monitor in use.

2. സജ്ജീകരണ ഗൈഡ്

2.1 പായ്ക്ക് ചെയ്യൽ, ഘടകങ്ങൾ എന്നിവ അൺപാക്ക് ചെയ്യുന്നു

Carefully unpack your moofit HR6 Heart Rate Monitor. Ensure all components are present:

• Heart Rate Sensor (the main unit with 'MOOFIT' logo)
• ക്രമീകരിക്കാവുന്ന ഇലാസ്റ്റിക് ചെസ്റ്റ് സ്ട്രാപ്പ്
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Figure 2: Main components of the moofit HR6 Heart Rate Monitor.

2.2 സ്ട്രാപ്പിൽ സെൻസർ ഘടിപ്പിക്കൽ

Align the two snap fasteners on the back of the heart rate sensor with the corresponding snaps on the elastic chest strap. Press firmly until they click into place. Ensure the 'MOOFIT' logo on the sensor is facing outwards when worn.

2.3 Moistening the Electrodes

Before wearing, lightly moisten the two electrode areas on the back of the chest strap with water or electrode gel. This improves conductivity and ensures accurate heart rate readings.

2.4 Wearing and Adjusting the Chest Strap

Place the chest strap around your chest, just below your pectoral muscles or bra line. The sensor should be centered on your sternum. Adjust the strap length to ensure a snug, comfortable fit that does not restrict breathing. The strap is adjustable from 65 to 95 cm.

Figure 3: Step-by-step guide for attaching the sensor, moistening electrodes, and wearing the strap.

2.5 Connecting to Devices and Apps

The moofit HR6 supports both Bluetooth and ANT+ connectivity, allowing it to pair with a wide range of fitness equipment and applications simultaneously.

2.5.1 ബ്ലൂടൂത്ത് വഴി ബന്ധിപ്പിക്കുന്നു

To connect to a smartphone, tablet, or Bluetooth-enabled fitness app (e.g., Wahoo Fitness, Endomondo, Peloton):

1. നിങ്ങളുടെ ഉപകരണത്തിൽ ബ്ലൂടൂത്ത് പ്രവർത്തനക്ഷമമാക്കിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
2. Open your preferred fitness app and navigate to its sensor or device pairing settings.
3. The moofit HR6 should appear in the list of available devices. Select it to pair.
4. Once connected, the app will display your real-time heart rate data.

2.5.2 Connecting via ANT+

To connect to ANT+-enabled bike computers, GPS watches, or other fitness equipment:

1. Ensure the ANT+ feature is active on your fitness device.
2. On your device, go to the sensor pairing menu and search for new sensors.
3. The moofit HR6 should be detected. Select it to establish the connection.

Figure 4: moofit HR6 supports both Bluetooth and ANT+ for versatile connectivity.

Figure 5: The moofit HR6 is compatible with popular fitness applications.

2.6 വീഡിയോ ഗൈഡ് സജ്ജീകരിക്കുക

For a visual guide on setting up your moofit HR6, please watch the official product video below:

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once your moofit HR6 is properly set up and connected to your desired device or app, it will automatically begin tracking your heart rate. Ensure the electrodes remain moist during your workout for continuous and accurate data transmission.

• തത്സമയ ഡാറ്റ: Your connected device/app will display your current heart rate, and often provide additional metrics like calorie consumption, training zones, and workout duration.
• Workout Analysis: Utilize the features of your chosen fitness app to analyze your performance, track progress over time, and adjust your training intensity based on heart rate zones.

4. പരിപാലനം

4.1 നെഞ്ച് സ്ട്രാപ്പ് വൃത്തിയാക്കൽ

After each use, detach the sensor from the strap. Rinse the elastic chest strap under running water and hang it to dry. For a more thorough cleaning, the strap can be hand-washed with mild soap and water. Do not machine wash or tumble dry, as this may damage the electrodes.

4.2 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The moofit HR6 uses a replaceable CR2032 coin cell battery. The battery life is approximately 10-12 months with typical use. When the battery is low, your connected device/app may indicate a weak signal or loss of connection.

1. Using a coin, gently twist the battery cover on the back of the sensor counter-clockwise to open.
2. പഴയ ബാറ്ററി നീക്കം ചെയ്യുക.
3. പോസിറ്റീവ് (+) വശം മുകളിലേക്ക് അഭിമുഖീകരിക്കുന്ന ഒരു പുതിയ CR2032 ബാറ്ററി ഇടുക.
4. Replace the battery cover and twist clockwise to secure it. Ensure the seal is tight to maintain water resistance.

4.3 ജല പ്രതിരോധം

The moofit HR6 sensor is designed with an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. It is suitable for use during sweaty workouts and in rainy conditions. However, it is not recommended for swimming.

Figure 6: The moofit HR6 is designed to be water-resistant for active use.

5. പ്രശ്‌നപരിഹാരം

5.1 No Heart Rate Reading / Intermittent Readings

• ഈർപ്പമുള്ള ഇലക്ട്രോഡുകൾ: Ensure the electrodes on the strap are sufficiently moistened with water or electrode gel before and during your workout.
• ശരിയായ ഫിറ്റ്: Verify the chest strap is worn snugly and correctly positioned on your chest.
• ബാറ്ററി പരിശോധന: The battery might be low or depleted. Replace the CR2032 battery if necessary.
• ഉപകരണം വീണ്ടും ജോടിയാക്കുക: Disconnect and re-pair the heart rate monitor with your fitness device/app.
• ഇടപെടൽ: Move away from strong electromagnetic fields or other wireless devices that might cause interference.

5.2 Difficulty Connecting via Bluetooth/ANT+

• സെൻസർ സജീവമാക്കുക: The sensor activates when worn and detects a heart rate. Ensure it is worn correctly.
• ഉപകരണ അനുയോജ്യത: Confirm your device/app supports Bluetooth 4.0 (or higher) and/or ANT+.
• സാമീപ്യം: Keep the heart rate monitor close to your receiving device during pairing.
• മുൻ കണക്ഷനുകൾ: If previously paired with another device, ensure it is disconnected from that device before attempting to pair with a new one.
• ഉപകരണങ്ങൾ പുനരാരംഭിക്കുക: Try restarting your smartphone, fitness watch, or bike computer.

6 സ്പെസിഫിക്കേഷനുകൾ

Figure 7: Physical dimensions and battery details of the moofit HR6.

7. വാറൻ്റിയും പിന്തുണയും

7.1 വാറൻ്റി വിവരങ്ങൾ

The moofit HR6 Heart Rate Monitor Chest Strap comes with a 1 വർഷത്തെ നിർമ്മാതാവിൻ്റെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ. സാധാരണ ഉപയോഗത്തിലുള്ള മെറ്റീരിയലുകളിലെയും പ്രവർത്തനങ്ങളിലെയും തകരാറുകൾ ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു. ദുരുപയോഗം, അപകടം, അനധികൃത പരിഷ്കരണം അല്ലെങ്കിൽ അനുചിതമായ അറ്റകുറ്റപ്പണികൾ എന്നിവ മൂലമുണ്ടാകുന്ന നാശനഷ്ടങ്ങൾക്ക് ഇത് പരിരക്ഷ നൽകുന്നില്ല.

7.2 ഉപഭോക്തൃ പിന്തുണ

For any questions, concerns, or assistance with your moofit HR6, please contact moofit customer service. We offer 24/7 online customer service to ensure you receive prompt and helpful support.

ബന്ധപ്പെടാനുള്ള രീതി: Please reach out to us via Amazon message for the quickest response.