moofit HR6 Heart Rate Monitor User Manual

ആമുഖം

Thank you for choosing the moofit HR6 Heart Rate Monitor. This device is designed to provide accurate heart rate data for various fitness activities, helping you optimize your training. This manual provides essential information on setting up, operating, maintaining, and troubleshooting your HR6 monitor.

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• moofit HR6 Heart Rate Sensor x 1
• CR2032 Battery (pre-installed in sensor) x 1
• Adjustable Elastic Chest Strap x 1

ഉൽപ്പന്നം കഴിഞ്ഞുview

The moofit HR6 Heart Rate Monitor consists of a sensor and an adjustable chest strap. It utilizes advanced technology to provide precise heart rate measurements.

Image: The moofit HR6 Heart Rate Monitor sensor attached to its black elastic chest strap.

പ്രധാന സവിശേഷതകൾ:

• Accurate Heart Rate Monitoring: Provides precision up to ±1 bpm, superior to optical heart rate sensors.
• ഇരട്ട കണക്റ്റിവിറ്റി: Supports both Bluetooth and ANT+ protocols for wide compatibility.
• സുഖപ്രദമായ ഡിസൈൻ: Lightweight (47g) fabric chest strap, adjustable from 65 to 95 cm.
• IP67 ജല പ്രതിരോധം: Protects against sweat and water splashes, suitable for most sports (not swimming).
• നീണ്ട ബാറ്ററി ലൈഫ്: Replaceable CR2032 battery offers 10-12 months of use.

Image: A woman exercising while wearing the moofit HR6 heart rate monitor, with icons indicating Bluetooth, ANT+, Live HR Tracking, Calories, App Compatibility, and IP67 water resistance.

ചിത്രം: വിശദമായത് views of the HR6 sensor, showing the front, back with ANT+ ID and metal connectors, the CR2032 replaceable battery compartment, and the adjustable buckle on the strap.

Image: The moofit HR6 sensor with water droplets on its surface, demonstrating its IP67 sweat and water resistance.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ (മുൻകൂട്ടി ഇൻസ്റ്റാൾ ചെയ്തിട്ടില്ലെങ്കിൽ)

The CR2032 battery is typically pre-installed. If you need to install or replace it:

1. സെൻസറിന്റെ പിൻഭാഗത്ത് ബാറ്ററി കവർ കണ്ടെത്തുക.
2. Use a coin to gently twist the cover counter-clockwise to open.
3. പോസിറ്റീവ് (+) വശം മുകളിലേക്ക് അഭിമുഖീകരിക്കുന്ന തരത്തിൽ CR2032 ബാറ്ററി തിരുകുക.
4. Replace the cover and twist clockwise to secure it.

2. Attaching and Adjusting the Chest Strap

1. Attach the sensor to the two snap fasteners on the chest strap.
2. Moisten the two electrode areas on the back of the chest strap with water or electrode gel. This ensures good contact with your skin.
3. Place the chest strap around your chest, just below your pectoral muscles. The sensor should be centered on your chest.
4. Adjust the strap length using the buckle for a snug, comfortable fit. It should be tight enough to stay in place but not restrict breathing.

Image: A four-step diagram illustrating how to attach the sensor to the strap, moisten the electrodes, adjust the strap, and wear the monitor correctly around the chest.

Image: A woman running while wearing the moofit HR6 heart rate monitor, alongside diagrams showing the adjustable strap length (65-95cm) and sensor dimensions (5.8cm x 3.4cm).

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. Pairing with Devices and Apps

The moofit HR6 supports both Bluetooth and ANT+ connectivity. Ensure the monitor is worn correctly and active (heart rate detected) before attempting to pair.

• For Bluetooth Pairing:
  1. Enable Bluetooth on your smartphone, sports watch, or fitness equipment.
  2. Open your preferred fitness app (e.g., Strava, Zwift, Wahoo Fitness, Peloton, etc.) or navigate to the sensor pairing menu on your device.
  3. ഇതിനായി തിരയുക new sensors. The moofit HR6 should appear as "moofit HR6" or a similar identifier.
  4. Select the device to pair.
• For ANT+ Pairing:
  1. Ensure your cycling computer, GPS watch, or fitness equipment supports ANT+.
  2. Navigate to the sensor pairing menu on your ANT+ compatible device.
  3. ഇതിനായി തിരയുക new sensors. The moofit HR6 will be detected automatically.
  4. Select the device to pair.

Note: The moofit HR6 can connect to multiple Bluetooth devices simultaneously (e.g., a phone and a watch) and an unlimited number of ANT+ devices.

Image: Illustration showing the moofit HR6 sensor connecting via Bluetooth and ANT+ to a smartphone app displaying heart rate data, a sports watch, a cycling computer, and a treadmill.

Image: A person running while wearing the moofit HR6, with a smartphone displaying fitness data and logos of various compatible third-party fitness applications.

2. During Exercise

Once paired, your device or app will display your real-time heart rate. The HR6 continuously transmits data, allowing you to monitor your intensity and calorie consumption.

• Ensure the strap remains snug to maintain good skin contact.
• Refer to your connected device or app for heart rate zones, training metrics, and workout summaries.

മെയിൻ്റനൻസ്

1. Cleaning the Chest Strap

After each use, detach the sensor from the strap. Rinse the elastic strap under running water and hang it to dry. Do not machine wash or tumble dry the strap, as this can damage the electrodes.

2. Cleaning the Sensor

ഒരു സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് സെൻസർ തുടച്ചു വൃത്തിയാക്കുക.amp cloth. Do not use abrasive cleaners or solvents. Ensure the sensor is dry before storing.

3. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

When the battery is low, your connected device or app may indicate a weak signal or no heart rate data. Replace the CR2032 battery as described in the "Setup" section. Dispose of used batteries responsibly.

Image: The moofit HR6 heart rate sensor separated from its elastic chest strap, ready for cleaning or battery replacement.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information and customer support, please refer to the documentation provided with your purchase or contact moofit customer service directly. The product typically includes a standard manufacturer's warranty.

If you have any questions or encounter issues with your moofit HR6 Heart Rate Monitor, please reach out to moofit customer support via the Amazon messaging system or their official website. They offer 24/7 online customer service.