AlorAir CleanShield HEPA 550 Air Scrubber HEPA/Activated Carbon Filter Replacement Manual

ആമുഖം

This manual provides essential instructions for the proper installation, maintenance, and understanding of your AlorAir HEPA/Activated Carbon Filter Replacement Set for the CleanShield HEPA 550 Air Scrubber. Adhering to these guidelines will ensure optimal performance and longevity of your air purification system.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The AlorAir HEPA/Activated Carbon Filter Replacement Set is specifically designed for the AlorAir CleanShield HEPA 550 Air Scrubber. This set includes three filters, combining the benefits of HEPA filtration with activated carbon to effectively capture airborne particles and odors.

Figure 1: AlorAir HEPA and Activated Carbon Filter Replacement Set (Pack of 3).

പ്രധാന സവിശേഷതകൾ:

• Dual Filtration: Combines a HEPA filter for particulate capture and an activated carbon filter for odor absorption.
• Enhanced Air Quality: Plays a crucial role in maintaining a clean and safe environment by removing dust, dangerous particles, and volatile organic compounds (VOCs).
• കൃത്യമായ ഫിറ്റ്: Designed for seamless integration with the AlorAir CleanShield HEPA 550 Air Scrubber, requiring no modifications.

Filter Components:

ചിത്രം 2: മുൻഭാഗം view of the pleated blue HEPA filter component.

ചിത്രം 3: പിൻഭാഗം view of the activated carbon filter component with honeycomb mesh.

Product Details Video:

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to correctly replace the filters in your AlorAir CleanShield HEPA 550 Air Scrubber:

1. പവർ ഓഫ്: Ensure the AlorAir CleanShield HEPA 550 Air Scrubber is turned off and unplugged from the power source before attempting any filter replacement.
2. Open the Unit: Locate and unlatch the clips securing the filter compartment cover. Carefully open the cover to access the filters.
3. പഴയ ഫിൽട്ടറുകൾ നീക്കം ചെയ്യുക: Gently remove the used pre-filter, HEPA filter, and activated carbon filter. Dispose of them according to local regulations.
4. പുതിയ ഫിൽട്ടറുകൾ ചേർക്കുക: Place the new HEPA/Activated Carbon filters into the unit. Ensure they are seated correctly and the "FRONT" indicator on the filter is facing the correct direction (typically towards the air intake). No modification of the air scrubber is required; simply place the new filter.
5. കവർ സുരക്ഷിതമാക്കുക: Close the filter compartment cover and secure all latches firmly.
6. ഇൻഡിക്കേറ്റർ ലൈറ്റ് പരിശോധിക്കുക: If the "Change HEPA Filter" indicator light was on, it should reset after proper filter replacement. If it remains on, ensure filters are correctly installed and the unit is properly sealed.

Figure 4: Proper insertion of the filter into the air scrubber.

Filter Replacement Video:

Operating Instructions (Filter Function)

Once the new filters are installed, the AlorAir CleanShield HEPA 550 Air Scrubber is ready for operation. The filters work in conjunction with the air scrubber to:

• Capture 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, pet dander, and mold spores.
• Absorb odors, smoke, and volatile organic compounds (VOCs) through the activated carbon layer.
• Maintain optimal air quality in various environments, including construction sites, water damage restoration areas, and during home renovations.

Refer to your AlorAir CleanShield HEPA 550 Air Scrubber's main instruction manual for detailed operating procedures of the unit itself.

മെയിൻ്റനൻസ്

Regular filter maintenance is crucial for the efficiency and effectiveness of your AlorAir CleanShield HEPA 550 Air Scrubber.

• മാറ്റിസ്ഥാപിക്കൽ ആവൃത്തി: It is recommended to change the HEPA/Activated Carbon filter every 6-8 months, depending on usage and air quality conditions.
• ഇൻഡിക്കേറ്റർ ലൈറ്റ്: Always change the Activated Filter when the "Change HEPA Filter" indicator light on your air scrubber illuminates.
• Remediation Use: When using the CleanShield for remediation purposes (e.g., water damage, mold), replace both filters at the same time and thoroughly clean the machine between jobs to prevent cross-contamination.

Figure 5: Visual reminder for recommended filter change frequency.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues after replacing your filters, consider the following:

• "Change HEPA Filter" Light Remains On:
  • Ensure the new filters are correctly seated and the compartment cover is securely latched.
  • Verify that the unit was powered off and unplugged during replacement.
  • If the issue persists, consult the main AlorAir CleanShield HEPA 550 Air Scrubber manual or contact AlorAir customer support.
• Reduced Airflow or Filtration Efficiency:
  • Check if the filters are installed in the correct orientation (airflow direction).
  • Confirm that the filters are genuine AlorAir replacements to ensure proper fit and performance.
  • Inspect the filters for any damage or manufacturing defects.

Figure 6: Importance of using genuine AlorAir filters for optimal performance.

സ്പെസിഫിക്കേഷനുകൾ

Figure 7: Detailed dimensions of the replacement filter.

പ്രധാനപ്പെട്ട അറിയിപ്പുകൾ

California Sales Restriction Notice: This product is not compliant with California Air Resources Board (CARB) regulations and is not available for sale in the state of California. It is, however, compliant with U.S. Environmental Protection Agency (EPA) standards for sale in other regions.

പിന്തുണ

For further assistance, technical support, or inquiries regarding your AlorAir products, please visit the official AlorAir website or contact their customer service team. AlorAir is committed to providing high-quality products and dedicated after-sales support.

കൂടുതൽ വിവരങ്ങൾക്ക്, സന്ദർശിക്കുക ALORAIR Store on Amazon.