BFT SB-BAT P125002 24V DC ബാറ്ററി ബാക്കപ്പ് കിറ്റ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides essential instructions for the installation, operation, and maintenance of the BFT SB-BAT P125002 24V DC Battery Backup Kit. This kit is designed to ensure continuous operation of compatible BFT gate openers during temporary power outages. Please read this manual thoroughly before proceeding with installation or use.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The BFT SB-BAT P125002 is a 24V DC battery backup system that integrates with specific BFT gate operators. It includes a smart charger board that manages battery charging when main power is available and automatically switches to battery power when the main supply is interrupted.

ചിത്രം 1: ഓവർview of the BFT SB-BAT P125002 Battery Backup Kit, showing the product box, two batteries, wiring, and mounting hardware.

2.1 കിറ്റ് ഘടകങ്ങൾ

• 2x 12V 1.2Ah Sealed Lead-Acid Batteries
• Smart Charger Board
• വയറിംഗ് ഹാർനെസുകൾ
• Battery Holder/Mounting Base
• മൗണ്ടിംഗ് ബ്രാക്കറ്റുകൾ
• Fasteners (screws, keys)
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

ചിത്രം 2: വിശദമായി view of the BFT SB-BAT P125002 kit components, including batteries, wiring, mounting brackets, and the battery holder.

3 അനുയോജ്യത

This battery backup system is compatible with the following BFT gate operator series:

• Deimos BT series of slide gate operators
• VIRGO - LINX
• EOS-SCE
• HYDRA N
• DEIMOS BT-QSC D-NETTUNO S
• SB BAT/SB CARBAT (DEIMOS BT-SB 300)
• BT BAT 2 (URANO BT ARES 1000 & ARES 1500)
• NETTUNO B
• VENERE D
• ARGO
• LIBRA C MA - LIBRA C LX

Ensure your gate operator model is listed above for proper functionality.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Installation of the BFT SB-BAT P125002 kit is designed to be straightforward. However, it is recommended that installation be performed by a qualified technician to ensure safety and correct operation. Always disconnect main power to the gate operator before beginning installation.

4.1. സുരക്ഷാ മുൻകരുതലുകൾ

• പവർ വിച്ഛേദിക്കുക: Always turn off the main power supply to the gate operator before installation or maintenance.
• ശരിയായ ഉപകരണങ്ങൾ: Use appropriate tools for electrical connections and mounting.
• വയറിംഗ്: Ensure all wiring connections are secure and correctly polarized.
• പരിസ്ഥിതി: Install the kit in a dry, protected location, away from direct weather exposure.

4.2. ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ (പൊതു മാർഗ്ഗനിർദ്ദേശങ്ങൾ)

1. Mount the Battery Holder: Secure the battery holder/mounting base within the gate operator's control box or an appropriate enclosure using the provided mounting brackets and fasteners. Ensure it is stable and accessible.
2. ബാറ്ററികൾ ചേർക്കുക: Place the two 12V 1.2Ah batteries into the battery holder.
3. ബാറ്ററികൾ ബന്ധിപ്പിക്കുക: Connect the batteries in series to achieve 24V DC, following the wiring diagram provided with your specific gate operator or the kit's smart charger board. Ensure correct polarity.
4. Connect Smart Charger Board: Integrate the smart charger board into the gate operator's control unit. Refer to your gate operator's manual for the specific connection points for the battery backup system.
5. സുരക്ഷിത വയറിംഗ്: Route and secure all wiring to prevent pinching or damage.
6. പവർ പുന ore സ്ഥാപിക്കുക: Once all connections are verified and secure, restore main power to the gate operator. The smart charger board will begin charging the batteries.
7. ടെസ്റ്റ് സിസ്റ്റം: Perform a power outage simulation to verify the battery backup system activates correctly and powers the gate operator.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The BFT SB-BAT P125002 operates automatically once installed correctly.

5.1. Normal Operation (Power On)

When main power is supplied to the gate operator, the smart charger board within the SB-BAT kit continuously monitors the battery charge level. It will charge the batteries as needed to maintain them at full capacity.

5.2 പവർ ഔtage Operation (Power Off)

ഒരു പവർ ഈ സാഹചര്യത്തിൽtage, the smart charger board automatically detects the loss of main power and switches the gate operator to battery power. The gate operator will then function normally using the stored energy in the batteries. The duration of operation on battery power depends on the frequency of gate usage and the charge level of the batteries.

6. പരിപാലനം

Regular maintenance ensures the longevity and reliability of your battery backup system.

6.1. ബാറ്ററി റീചാർജിംഗ്

ഒരു ശക്തിക്ക് ശേഷംtage, once main power is restored, the smart charger board will automatically begin recharging the batteries. A full recharge typically takes 12 മുതൽ 14 മണിക്കൂർ വരെ. It is important to allow sufficient time for batteries to fully recharge after use.

6.2. Fuse Check

സിസ്റ്റത്തിൽ എ ഉൾപ്പെടുന്നു 20എ ഫ്യൂസ് for protection. If the battery backup system fails to operate or charge, inspect the fuse for continuity. Replace with a fuse of the exact same rating if necessary. Always disconnect power before checking or replacing fuses.

6.3. ബാറ്ററി ലൈഫും മാറ്റിസ്ഥാപിക്കലും

Batteries have a finite lifespan. Periodically test the system by simulating a power outage to ensure batteries hold a charge and can power the gate operator. If performance degrades significantly, consider replacing the batteries. Use only recommended replacement batteries (2x 12V 1.2Ah sealed lead-acid).

7. പ്രശ്‌നപരിഹാരം

If your BFT SB-BAT P125002 battery backup system is not functioning as expected, consider the following:

• No Power During Outage:
  • എല്ലാ വയറിംഗ് കണക്ഷനുകളും സുരക്ഷിതവും കൃത്യവുമാണെന്ന് ഉറപ്പാക്കുക.
  • Check the 20A fuse.
  • Ensure batteries are fully charged. If recently discharged, allow 12-14 hours for recharging.
  • ബാറ്ററി വോളിയം പരിശോധിക്കുകtage. If below 20.4V (exhausted battery protection threshold), batteries may need replacement.
• ബാറ്ററികൾ ചാർജുചെയ്യുന്നില്ല:
  • Confirm main power supply to the gate operator is active.
  • Check all connections to the smart charger board.
  • Inspect the 20A fuse.
• Reduced Operation Time:
  • Batteries may be aging and losing capacity. Consider replacement.
  • Ensure batteries are fully charged before testing.

For persistent issues, contact BFT technical support or a qualified service technician.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, please refer to the documentation provided with your original purchase or contact BFT customer support directly. For technical assistance, installation queries, or troubleshooting beyond the scope of this manual, please contact your authorized BFT dealer or BFT technical support.

BFT Contact Information: Please visit the official BFT webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കുമുള്ള സൈറ്റ്.