Turck NI3-EG08K-AP6X-V1131

TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor User Manual

Model: NI3-EG08K-AP6X-V1131

1. ആമുഖം

This manual provides essential information for the proper installation, operation, and maintenance of the TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor. This inductive sensor is designed for non-contact detection of metallic objects.

സുരക്ഷിതവും കാര്യക്ഷമവുമായ പ്രവർത്തനം ഉറപ്പാക്കാൻ ഉൽപ്പന്നം ഉപയോഗിക്കുന്നതിന് മുമ്പ് ദയവായി ഈ മാനുവൽ നന്നായി വായിക്കുക.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: Failure to follow these safety instructions may result in personal injury or equipment damage.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The TURCK NI3-EG08K-AP6X-V1131 is an inductive proximity sensor with the following key features:

This sensor is designed for reliable detection of metallic targets in industrial environments.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

4.1 മൗണ്ടിംഗ്

  1. Select a mounting location where the sensor is protected from physical damage and excessive heat.
  2. Mount the M8x1 barrel sensor using appropriate mounting hardware, ensuring it is securely fastened.
  3. Maintain adequate clearance around the sensor head to prevent interference from surrounding metallic objects, especially for flush-mountable sensors. Refer to the sensor's datasheet for specific mounting distances.

4.2 വയറിംഗ്

The sensor features a 3-pin M8 male connector. Follow the standard wiring color code for PNP sensors:

Connect the sensor to the control system according to the wiring diagram provided by the system manufacturer. Ensure all connections are secure and properly insulated.

5. ഓപ്പറേഷൻ

Once properly installed and wired, apply power to the sensor. The integrated LED indicator will provide status feedback:

The sensor operates by generating an electromagnetic field. When a metallic object enters this field, it causes a change in oscillation, triggering the output. The 3mm sensing range ensures reliable detection for small to medium-sized metallic targets.

6. പരിപാലനം

The TURCK NI3-EG08K-AP6X-V1131 sensor is designed for minimal maintenance. However, regular inspection can prolong its lifespan and ensure reliable operation.

7. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Sensor not detecting objects / LED always OFF
  • വൈദ്യുതി വിതരണം ഇല്ല
  • തെറ്റായ വയറിംഗ്
  • Object out of sensing range
  • സെൻസർ കേടായി
  • Check power supply (10-30VDC).
  • സെക്ഷൻ 4.2 അനുസരിച്ച് വയറിംഗ് പരിശോധിക്കുക.
  • Adjust target position within 3mm range.
  • Replace sensor if damaged.
Sensor always ON / LED always ON
  • Metallic object permanently in sensing range
  • Interference from surrounding metal
  • സെൻസർ തകരാർ
  • Remove any metallic objects from the sensing area.
  • Check mounting clearances.
  • സെൻസർ തകരാറിലാണെങ്കിൽ മാറ്റിസ്ഥാപിക്കുക.
ഇടവിട്ടുള്ള കണ്ടെത്തൽ
  • അയഞ്ഞ കണക്ഷനുകൾ
  • വൈബ്രേഷൻ
  • Target speed too high
  • എല്ലാ വയറിംഗ് കണക്ഷനുകളും സുരക്ഷിതമാക്കുക.
  • Ensure stable mounting.
  • Verify target speed is within sensor capabilities (refer to datasheet).

8 സ്പെസിഫിക്കേഷനുകൾ

പരാമീറ്റർമൂല്യം
മോഡൽ നമ്പർNI3-EG08K-AP6X-V1131
നിർമ്മാതാവ്ടർക്ക്
സെൻസിംഗ് റേഞ്ച്3 മി.മീ
ഭവന തരംM8x1 Barrel, 8mm stainless steel full threading short barrel
ഔട്ട്പുട്ട് തരംPNP, സാധാരണയായി തുറന്നത് (NO)
ഓപ്പറേറ്റിംഗ് വോളിയംtage10-30 വി.ഡി.സി
കണക്ഷൻM8 Male Connector (Picofast 3-Pin QD)
സൂചകം1 എൽ.ഇ.ഡി
ASINB0898TS8W2
ആദ്യ തീയതി ലഭ്യമാണ്മെയ് 27, 2020

9. വാറൻ്റിയും പിന്തുണയും

For specific warranty information, please refer to the documentation provided with your purchase or contact Turck customer support directly. General warranty terms typically cover defects in materials and workmanship for a specified period from the date of purchase.

For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact Turck customer service or your authorized distributor. Have your model number (NI3-EG08K-AP6X-V1131) ready when contacting support.

Turck Official Webസൈറ്റ്: www.turck.com

അനുബന്ധ രേഖകൾ - NI3-EG08K-AP6X-V1131

പ്രീview TURCK TBEC-LL-4RFID-8DXP RFID Interface: Instructions for Use
This document provides comprehensive instructions for the TURCK TBEC-LL-4RFID-8DXP RFID Interface, detailing its installation, connection, operation, and safety guidelines for industrial automation applications.
പ്രീview ടർക്ക് നിംഫെ-ഇഎം12/4.6L88-UP6X-H1141/S1182 മാഗ്നറ്റിക് ഫീൽഡ് സെൻസർ - സാങ്കേതിക ഡാറ്റയും മൗണ്ടിംഗും
ഫെറോ മാഗ്നറ്റിക് ഭാഗങ്ങൾ കണ്ടെത്തുന്നതിനുള്ള TIN കോട്ടിംഗുള്ള TURCK NIMFE-EM12/4.6L88-UP6X-H1141/S1182 മാഗ്നറ്റിക് ഫീൽഡ് സെൻസറിന്റെ വിശദമായ സാങ്കേതിക സവിശേഷതകൾ, സവിശേഷതകൾ, വയറിംഗ് ഡയഗ്രം, പ്രവർത്തന തത്വം, മൗണ്ടിംഗ് നിർദ്ദേശങ്ങൾ.
പ്രീview ടർക്ക് ഫെൻ20-4ഐഒഎൽ ഐഒ-ലിങ്ക് മാസ്റ്റർ മൊഡ്യൂൾ: ഉപയോഗത്തിനുള്ള നിർദ്ദേശങ്ങൾ
TURCK FEN20-4IOL IO-ലിങ്ക് മാസ്റ്റർ മൊഡ്യൂളിനായുള്ള സമഗ്രമായ നിർദ്ദേശങ്ങൾ, അതിന്റെ സവിശേഷതകൾ, സിസ്റ്റം ആർക്കിടെക്ചർ, ഇൻസ്റ്റാളേഷൻ, കമ്മീഷൻ ചെയ്യൽ, വ്യാവസായിക ഓട്ടോമേഷൻ ആപ്ലിക്കേഷനുകൾക്കായുള്ള പ്രവർത്തനം എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ടർക്ക് എംആർ... റഡാർ സ്കാനർ ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്
ടർക്ക് എംആർ... റഡാർ സ്കാനറിനായുള്ള ദ്രുത ആരംഭ ഗൈഡ്, സമ്പർക്കമില്ലാത്ത വസ്തുക്കൾ കണ്ടെത്തൽ, ദൂരം, ആംഗിൾ, വേഗത അളക്കൽ എന്നിവയ്ക്കുള്ള അതിന്റെ സവിശേഷതകൾ വിശദീകരിക്കുന്നു. വ്യാവസായിക ഓട്ടോമേഷൻ ആപ്ലിക്കേഷനുകൾക്കായുള്ള ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, സാങ്കേതിക സവിശേഷതകൾ, സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ, അനുസരണ വിവരങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു. IO-Link, SAE J1939 പ്രോട്ടോക്കോളുകൾ എന്നിവ പിന്തുണയ്ക്കുന്നു.
പ്രീview TURCK NIC...-EM30-IOL-... Inductive Couplers Quick Start Guide
Quick start guide for TURCK NIC...-EM30-IOL-... inductive couplers, detailing intended use, safety precautions, product features, installation, connection, operation, LED indicators, troubleshooting, and technical specifications. Includes information on IO-Link and SIO modes.
പ്രീview TBPN-L5-4FDI-4FDX സേഫ്റ്റി ബ്ലോക്ക് I/O മൊഡ്യൂൾ: ഉപയോഗത്തിനുള്ള നിർദ്ദേശങ്ങൾ
TURCK TBPN-L5-4FDI-4FDX സേഫ്റ്റി ബ്ലോക്ക് I/O മൊഡ്യൂളിനുള്ള ഉപയോഗത്തിനുള്ള നിർദ്ദേശങ്ങൾ ഈ പ്രമാണം നൽകുന്നു. ഇത് ഉൽപ്പന്ന വിവരണം, സുരക്ഷാ വിവരങ്ങൾ, ഇൻസ്റ്റാളേഷൻ, കോൺഫിഗറേഷൻ, പ്രവർത്തനം, വ്യാവസായിക ഓട്ടോമേഷൻ ആപ്ലിക്കേഷനുകൾക്കായുള്ള സാങ്കേതിക ഡാറ്റ എന്നിവ ഉൾക്കൊള്ളുന്നു.