റോബോടൈം RBT-DG145

ROBOTIME Emily's Flower Shop DIY Dollhouse Kit Instruction Manual

മോഡൽ: RBT-DG145

1. ആമുഖം

This manual provides comprehensive instructions for assembling and maintaining your ROBOTIME Emily's Flower Shop DIY Dollhouse Kit. This 1:24 scale craft kit is designed for enthusiasts aged 14 and up, offering a detailed and engaging building experience. Please read all instructions carefully before beginning assembly.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ: This kit contains small parts and is not suitable for children under 3 years old due to choking hazards. Adult supervision is recommended for users under 14. Keep all materials away from open flames and excessive heat. Batteries are not included and must be purchased separately.

Assembled ROBOTIME Emily's Flower Shop dollhouse kit with LED lights on, showcasing the detailed interior and exterior.

Figure 1: Fully assembled Emily's Flower Shop dollhouse kit.

2. ഭാഗങ്ങളുടെ പട്ടിക

Before starting assembly, verify that all components listed below are present in your kit. Refer to the included diagram for visual identification of parts.

Layout of all components included in the ROBOTIME Emily's Flower Shop DIY kit, showing various wooden pieces, paper cutouts, wires, and small accessories.

ചിത്രം 2: ഓവർview of all kit components. Note: Batteries are not included.

  • ഘടനാ ഘടകങ്ങൾക്കും ഫർണിച്ചറുകൾക്കും വേണ്ടി മുൻകൂട്ടി മുറിച്ച മര ഷീറ്റുകൾ.
  • Paper cutouts for decorative elements, plants, and books.
  • എൽഇഡി ലൈറ്റ് ഘടകങ്ങളും വയറിംഗും.
  • Small accessories (e.g., miniature tools, vases, pots).
  • Glue and paint (small quantities for specific parts).
  • Tweezers and other small assembly tools.
  • ഡയഗ്രമുകളുള്ള വിശദമായ നിർദ്ദേശ ലഘുലേഖ.

ഏതെങ്കിലും ഭാഗങ്ങൾ നഷ്ടപ്പെട്ടാലോ കേടുപാടുകൾ സംഭവിച്ചാലോ, സഹായത്തിനായി ROBOTIME ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

3. അസംബ്ലി നിർദ്ദേശങ്ങൾ

Follow these steps carefully to assemble your dollhouse kit. Each step is crucial for proper construction and stability.

3.1 തയ്യാറാക്കൽ

  1. Unpack all components and organize them by type and number as indicated in the parts list.
  2. വൃത്തിയുള്ളതും നല്ല വെളിച്ചമുള്ളതുമായ ഒരു ജോലിസ്ഥലം തയ്യാറാക്കുക.
  3. Gather necessary tools: scissors, ruler, and additional quick-drying glue if desired.

3.2 ഘട്ടം ഘട്ടമായുള്ള അസംബ്ലി

  1. അടിസ്ഥാന നിർമ്മാണം: Assemble the main floor and wall panels according to the diagrams in the instruction booklet. Ensure all tabs and slots align perfectly for a secure fit.
  2. ഫർണിച്ചർ അസംബ്ലി: Construct individual furniture pieces (e.g., shelves, tables, counters) as detailed in the manual. Pay close attention to the small details and adhesive application.
  3. Close-up images showing various stages of miniature furniture and plant assembly, including cutting paper, bending wires, and gluing small parts.

    Figure 3: Detailed steps for assembling miniature elements.

  4. അലങ്കാര ഘടകങ്ങൾ: Cut out and assemble all paper-based decorative items, such as plants, books, and wall art. Use the provided glue sparingly to avoid warping.
  5. Wiring and Lighting: Install the LED light components. Carefully follow the wiring diagram to connect the lights. The battery case is typically located at the back or base of the model.
  6. അന്തിമ അസംബ്ലി: Integrate all assembled furniture and decorative elements into the main dollhouse structure. Secure any remaining loose parts.

For a visual guide on the assembly process, please watch the official ROBOTIME DIY Miniature Dollhouse Kit video:

Video 1: ROBOTIME DIY Miniature Dollhouse Kit with Furniture - An overview of the assembly process and final product.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 LED ലൈറ്റ് ഓപ്പറേഷൻ

  1. ബാറ്ററികൾ ചേർക്കുക: Open the battery case located at the back of the dollhouse. Insert the required batteries (not included, typically AAA or button cell) according to the polarity markings.
  2. പവർ ഓൺ/ഓഫ്: Locate the small switch on the battery case or a designated switch on the dollhouse base. Flip the switch to the 'ON' position to illuminate the LED lights. Flip to 'OFF' to turn them off.
A beautifully lit miniature dollhouse, Emily's Flower Shop, placed on a wooden table, demonstrating the effect of the integrated LED lighting.

Figure 4: Emily's Flower Shop illuminated by LED lights.

5. പരിപാലനം

To ensure the longevity and appearance of your ROBOTIME dollhouse, follow these maintenance guidelines:

  • വൃത്തിയാക്കൽ: Gently dust the dollhouse and its components with a soft, dry cloth or a soft brush. Avoid using water or chemical cleaners, as they may damage the materials.
  • സംഭരണം: Store the dollhouse in a dry, cool place away from direct sunlight and extreme temperatures to prevent warping or fading of colors.
  • കൈകാര്യം ചെയ്യൽ: Handle the assembled dollhouse with care, especially when moving it, to prevent delicate parts from breaking.

6. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
LED വിളക്കുകൾ ഓണാക്കുന്നില്ല.
  • Batteries are not inserted or are dead.
  • തെറ്റായ ബാറ്ററി പോളാരിറ്റി.
  • അയഞ്ഞ വയറിംഗ് കണക്ഷൻ.
  • Insert new batteries or replace old ones.
  • Check and correct battery polarity.
  • Inspect all wiring connections and re-secure any loose ones.
ഭാഗങ്ങൾ പരസ്പരം യോജിക്കുന്നില്ല.
  • Incorrect part selection.
  • Excess glue obstructing fit.
  • Part is warped or damaged.
  • Double-check part numbers against the manual.
  • Carefully remove excess dried glue.
  • Contact customer support for replacement parts if damaged.
Assembled structure is unstable.
  • Insufficient glue application.
  • Parts not fully seated.
  • Apply more glue to joints and hold until set.
  • Press parts firmly into place to ensure full seating.

7 സ്പെസിഫിക്കേഷനുകൾ

  • മോഡലിൻ്റെ പേര്: Emily's Flower Shop
  • മോഡൽ നമ്പർ: RBT-DG145
  • ബ്രാൻഡ്: റോബോടൈം
  • സ്കെയിൽ: 1:24
  • കൂട്ടിച്ചേർത്ത അളവുകൾ: 8.6 x 6.5 x 8.2 ഇഞ്ച് (നീളം x വീതി x ഉയരം)
  • ഇനത്തിൻ്റെ ഭാരം: 2.24 പൗണ്ട്
  • ശുപാർശ ചെയ്യുന്ന പ്രായം: 14 വർഷവും അതിൽ കൂടുതലും
  • കഷണങ്ങളുടെ എണ്ണം: Approximately 258 (as per product image)
  • അസംബ്ലി സമയം: Approximately 35 hours (as per product image)
Product image showing the dimensions of the assembled dollhouse: 8.6 inches length, 7.5 inches width, 8.2 inches height, along with icons indicating 35 hours assembly time, 258 pieces, and 14+ age recommendation.

Figure 5: Key specifications and assembly details.

8. വാറൻ്റിയും പിന്തുണയും

ROBOTIME stands behind the quality of its products. For any manufacturing defects or missing parts, please contact our customer support team. Keep your purchase receipt as proof of purchase.

ഉപഭോക്തൃ പിന്തുണ: For assistance with assembly, troubleshooting, or replacement parts, please visit the official ROBOTIME store or contact us through the platform where you purchased the product. We aim to respond to all inquiries within 24 hours.

Visit the official ROBOTIME Store: ആമസോണിലെ റോബോടൈം സ്റ്റോർ

അനുബന്ധ രേഖകൾ - RBT-DG145

പ്രീview കാത്തിസ് ഫ്ലവർ ഹൗസ് DG104: മിനിയേച്ചർ DIY അസംബ്ലി ഗൈഡ്
റോബോട്ടൈമിന്റെ കാത്തിസ് ഫ്ലവർ ഹൗസ് DG104 മിനിയേച്ചർ DIY ക്രാഫ്റ്റ് കിറ്റിനായുള്ള സമഗ്രമായ അസംബ്ലി നിർദ്ദേശങ്ങൾ. നിങ്ങളുടെ സ്വന്തം മനോഹരമായ പുഷ്പ വീട് നിർമ്മിക്കാൻ സഹായിക്കുന്നതിന് വിശദമായ ഘട്ടങ്ങൾ, നുറുങ്ങുകൾ, ഭാഗങ്ങളുടെ ലിസ്റ്റുകൾ എന്നിവ ഈ ഗൈഡ് നൽകുന്നു.
പ്രീview ROKR AMK52 സീക്രട്ട് ഗാർഡൻ DIY മെക്കാനിക്കൽ മ്യൂസിക് ബോക്സ് അസംബ്ലി നിർദ്ദേശങ്ങൾ
റോബോട്ടൈമിന്റെ ROKR AMK52 സീക്രട്ട് ഗാർഡൻ DIY മെക്കാനിക്കൽ മ്യൂസിക് ബോക്സിനായുള്ള സമഗ്രമായ അസംബ്ലി നിർദ്ദേശങ്ങൾ. പാർട്സ് ലിസ്റ്റ്, ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങൾ, വിജയകരമായ നിർമ്മാണത്തിനുള്ള സഹായകരമായ നുറുങ്ങുകൾ എന്നിവയുൾപ്പെടെ അസംബ്ലി പ്രക്രിയയുടെ വിശദമായ വാക്ക്ത്രൂ ഈ ഗൈഡ് നൽകുന്നു.
പ്രീview ഒലിവിയയുടെ അടുക്കള അസംബ്ലി നിർദ്ദേശങ്ങൾ - ROBOTIME WCF09
ROBOTIME Olivia's Kitchen പ്ലേ സെറ്റിന്റെ (മോഡൽ WCF09) വിശദമായ അസംബ്ലി നിർദ്ദേശങ്ങൾ. ഈ മരം കൊണ്ടുള്ള കളിപ്പാട്ട അടുക്കള നിർമ്മിക്കുന്നതിനുള്ള ഭാഗങ്ങളുടെ പട്ടിക, ഘട്ടം ഘട്ടമായുള്ള മാർഗ്ഗനിർദ്ദേശം, സുരക്ഷാ മുന്നറിയിപ്പുകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview റോബോട്ടൈം ഇസി ഡിക്ലറേഷൻ ഓഫ് കൺഫോമിറ്റി - മിനിയേച്ചർ ഹൗസ് കിറ്റുകൾ
മൈൻഡ്-ഫൈൻഡ് ബുക്ക്‌സ്റ്റോർ, ഹോളിഡേ പാർട്ടി ടൈം തുടങ്ങിയ മോഡലുകൾ ഉൾപ്പെടെ, റോബോട്ടൈം ടെക്‌നോളജി (സുഷൗ) കമ്പനി ലിമിറ്റഡിന്റെ DIY മിനിയേച്ചർ ഹൗസ് കിറ്റുകളുടെ ശ്രേണി, യോജിച്ച മാനദണ്ഡങ്ങൾ പാലിക്കുന്നതായി ഔദ്യോഗിക EC പ്രഖ്യാപനം.
പ്രീview റോബോട്ടൈം LG504 ഉൽപ്പന്ന സുരക്ഷാ മുന്നറിയിപ്പുകളും നിർമ്മാതാവിന്റെ വിശദാംശങ്ങളും
റോബോടൈം LG504-നെക്കുറിച്ചുള്ള അവശ്യ സുരക്ഷാ വിവരങ്ങൾ, അതിൽ പ്രായ നിയന്ത്രണങ്ങൾ, ചെറിയ ഭാഗങ്ങളെക്കുറിച്ചുള്ള മുന്നറിയിപ്പുകൾ, EC പ്രതിനിധി (ROBOTIME EUROPE LTD), നിർമ്മാതാവ് (Robotime C&C (iangsu) Co.. Ltd) എന്നിവർക്കുള്ള വിശദാംശങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview റോബോട്ടൈം ഇസി അനുരൂപതയുടെ പ്രഖ്യാപനം - ഉൽപ്പന്ന പട്ടികയും അനുസരണവും
റോബോട്ടൈം ടെക്നോളജി (സുഷൗ) CO., LTD യിൽ നിന്നുള്ള ഔദ്യോഗിക EC പ്രഖ്യാപനം, അനുയോജ്യമായ തടി മോഡൽ കിറ്റുകൾ, അവയുടെ ഉൽപ്പന്ന വിശദാംശങ്ങൾ, ബാധകമായ ഹാർമോണൈസ്ഡ് സ്റ്റാൻഡേർഡുകളും ടെസ്റ്റ് റിപ്പോർട്ടുകളും പട്ടികപ്പെടുത്തുന്നു.