HTRC T400 Pro Dual Touch Screen Battery Charger User Manual

1. ആമുഖം

The HTRC T400 Pro is an advanced dual-channel balance charger and discharger designed for various battery types, including LiPo, LiFe, Lilon, LiHV, NiCd, NiMH, and Pb batteries. Featuring a responsive touch screen interface, it offers intuitive control and comprehensive charging modes to ensure efficient and safe battery management. Its robust design and intelligent features make it suitable for hobbyists and professionals alike.

പ്രധാന സവിശേഷതകൾ:

• Dual Channel Operation: Charge two different battery types simultaneously.
• High Power Output: Up to 200W per single port (AC mode) or 400W total (DC mode).
• Wide Battery Compatibility: Supports LiPo, LiFe, Lilon, NiCd, NiMh, Pb, and LiHV batteries.
• Automatic Cell Count Recognition for LiPo batteries.
• Adjustable Digital DC Power.
• Integrated Smart Cooling Fan for effective heat dissipation.
• Built-in High-Efficiency PFC AC Adapter with power switch.
• Graphical Display of Charging Status.
• Multiple Charging Modes: Balance Charge, Charge, Storage, Discharge, Cycle, Trickle.

2. സജ്ജീകരണം

2.1 പാക്കേജ് ഉള്ളടക്കം

Before proceeding with the setup, please verify that all items listed below are present in your package:

• 1 x HTRC T400 Pro Charger
• 2 x Banana plug to T-plug charging cables
• 2 x Connectors (T-plug to XT60 cable)
• 2 x Balance boards with pin wire
• 1 x എസി പവർ കേബിൾ
• 1 x DC power cable
• 1 x ഉപയോക്തൃ മാനുവൽ

2.2 പ്രാരംഭ കണക്ഷൻ

1. Place the charger on a stable, flat, and heat-resistant surface.
2. Connect the appropriate power cable (AC or DC) to the charger's input port.
3. If using AC power, plug the AC cable into a wall outlet (100-240V). If using DC power, connect the DC cable to a compatible power source (11-18V).
4. Turn on the charger using the integrated power switch. The touch screen will illuminate.
5. Connect your battery to the appropriate charging port (CH1 or CH2) using the provided charging cables and connectors. Ensure correct polarity.
6. For balance charging, connect the battery's balance lead to the corresponding balance port on the charger or balance board.

Figure 1: HTRC T400 Pro Dual Touch Screen Battery Charger. A black, rectangular battery charger with a central blue LCD touch screen displaying charging information. Below the screen are three buttons: 'Start/Stop' for channel 1, 'Switch CH' for channel selection, and 'Start/Stop' for channel 2. The charger has a textured, ergonomic design with four fan-like vents on the corners.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 ടച്ച് സ്ക്രീൻ ഇന്റർഫേസ്

The HTRC T400 Pro features a user-friendly touch screen. Navigate through menus and settings by tapping on the screen. The main display shows real-time charging data, including voltage, current, and elapsed time.

3.2 Selecting Battery Type and Mode

1. After powering on, select the desired charging channel (CH1 or CH2) using the 'Switch CH' button or by tapping the corresponding channel on the screen.
2. On the selected channel's screen, tap to enter the battery type selection menu. Choose the correct battery chemistry (e.g., LiPo, NiMH, Pb) that matches your connected battery. പ്രധാനപ്പെട്ടത്: Always select the correct battery type to prevent damage to the battery or charger.
3. Once the battery type is selected, choose the desired operating mode. Available modes vary by battery type:
• LiPo/Lilon/LiFe/LiHV: Balance Charge, Charge, Storage, Discharge.
• NiMH/NiCd: Charge, Discharge, Cycle.
• PB: Charge, Discharge, Trickle.
4. Adjust charging parameters such as charge current (0.1-12A) and discharge current (0.1-2A) as needed. The charger can automatically recognize LiPo cell count.
5. Press the 'Start/Stop' button for the selected channel to begin the operation. The screen will display the charging progress graphically.
6. To stop an operation, press the 'Start/Stop' button again. The charger will automatically stop charging when the battery is full.

3.3 Dual Channel Operation

The T400 Pro allows simultaneous charging of two different batteries. Follow the steps above for each channel independently. Ensure that you do not attempt to charge two different batteries on the same channel at the same time.

4. പരിപാലനം

To ensure the longevity and optimal performance of your HTRC T400 Pro charger, follow these maintenance guidelines:

• ചാർജർ വൃത്തിയായും പൊടിയും അവശിഷ്ടങ്ങളും ഇല്ലാതെയും സൂക്ഷിക്കുക. വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക.
• ചാർജറിൽ ഈർപ്പം, തീവ്രമായ താപനില, നേരിട്ടുള്ള സൂര്യപ്രകാശം എന്നിവ ഏൽക്കരുത്.
• Ensure proper ventilation around the charger during operation. The built-in smart cooling fan helps dissipate heat, but obstructions can hinder its effectiveness.
• Regularly inspect cables and connectors for any signs of wear or damage. Replace damaged components immediately.
• ഉപയോഗത്തിലില്ലാത്തപ്പോൾ തണുത്തതും ഉണങ്ങിയതുമായ സ്ഥലത്ത് ചാർജർ സൂക്ഷിക്കുക.

5. പ്രശ്‌നപരിഹാരം

If you encounter issues with your HTRC T400 Pro charger, refer to the following common problems and solutions:

ഈ പരിഹാരങ്ങൾ പരീക്ഷിച്ചതിനുശേഷവും പ്രശ്നം നിലനിൽക്കുകയാണെങ്കിൽ, ദയവായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

HTRC products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the contact details provided with your purchase or visit the official HTRC webവാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.