ഐഡിപെൻ 2-പോർട്ട് പിസിഐ-ഇ മുതൽ യുഎസ്ബി 3.0 എക്സ്പാൻഷൻ കാർഡ് യൂസർ മാനുവൽ

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and troubleshooting of your Aideepen 2-Port PCI-E to USB 3.0 Expansion Card. This card is designed to add two high-speed USB 3.0 ports to your computer system, enhancing connectivity and data transfer capabilities. Please read this manual thoroughly before installation and retain it for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

• Always disconnect your computer from the power source before opening the case or installing any internal components.
• Wear an anti-static wrist strap or frequently touch a grounded metal object (like the computer case) to discharge static electricity before handling the expansion card. Static discharge can damage electronic components.
• Handle the expansion card by its edges to avoid touching the gold connectors or components on the circuit board.
• Ensure proper ventilation inside your computer case to prevent overheating.
• Do not attempt to modify or repair the card yourself. Refer to qualified service personnel if issues arise.

3. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• Aideepen 2-Port PCI-E to USB 3.0 Expansion Card
• ലോ-പ്രോfile bracket (for small form factor cases)

ചിത്രം 3.1: The Aideepen 2-Port PCI-E to USB 3.0 Expansion Card, shown with both the standard and optional low-profile മൗണ്ടിംഗ് ബ്രാക്കറ്റുകൾ.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

4.1 ഫിസിക്കൽ ഇൻസ്റ്റലേഷൻ

1. നിങ്ങളുടെ കമ്പ്യൂട്ടർ തയ്യാറാക്കുക: നിങ്ങളുടെ കമ്പ്യൂട്ടർ പൂർണ്ണമായും ഓഫ് ചെയ്ത് വാൾ ഔട്ട്‌ലെറ്റിൽ നിന്ന് പവർ കോർഡ് അൺപ്ലഗ് ചെയ്യുക.
2. Open the computer case: മദർബോർഡിലേക്ക് പ്രവേശിക്കാൻ നിങ്ങളുടെ കമ്പ്യൂട്ടർ കേസിന്റെ സൈഡ് പാനൽ നീക്കം ചെയ്യുക.
3. Locate an available PCI-E slot: Identify an empty PCI-E x1, x4, x8, or x16 slot on your motherboard. This card is compatible with various PCI-E slot sizes.

ചിത്രം 4.1: The expansion card is compatible with PCI-E x1, x4, x8, and x16 slots. Ensure you select an available slot on your motherboard.
4. Remove the slot cover: Unscrew and remove the metal slot cover corresponding to the chosen PCI-E slot on the back of your computer case.
5. Insert the expansion card: Carefully align the gold connectors of the expansion card with the PCI-E slot. Press down firmly and evenly until the card is securely seated in the slot.
6. കാർഡ് സുരക്ഷിതമാക്കുക: Fasten the expansion card to the computer case using the screw from the removed slot cover.
7. പവർ ബന്ധിപ്പിക്കുക: Connect a 4-pin Molex power connector from your power supply unit (PSU) to the corresponding port on the expansion card. This connection is essential for stable operation and sufficient power delivery to the USB ports.


ചിത്രം 4.2: The 4-pin Molex power connector (white) on the expansion card must be connected to your power supply for proper functionality. The blue connector is a 20-pin USB 3.0 header for front panel USB ports.

8. കമ്പ്യൂട്ടർ കേസ് അടയ്ക്കുക: നിങ്ങളുടെ കമ്പ്യൂട്ടർ കേസിന്റെ സൈഡ് പാനൽ മാറ്റി പവർ കോർഡ് വീണ്ടും ബന്ധിപ്പിക്കുക.
9. പവർ ഓൺ: നിങ്ങളുടെ കമ്പ്യൂട്ടർ ഓണാക്കുക.

4.2 ഡ്രൈവർ ഇൻസ്റ്റലേഷൻ

For optimal performance and compatibility, especially with Windows operating systems, driver installation may be required. While some operating systems may detect the card automatically, manual driver installation ensures full functionality.

1. ഡ്രൈവറുകൾ ഡൗൺലോഡ് ചെയ്യുക: Access the latest drivers from the following link: Google Drive Driver Folder.
2. എക്സ്ട്രാക്റ്റ് Files: ഡൗൺലോഡ് ചെയ്താൽ file is compressed (e.g., .zip), extract its contents to a temporary folder on your computer.
3. ഡ്രൈവർ ഇൻസ്റ്റാൾ ചെയ്യുക: Follow the instructions provided within the driver package. This typically involves running a setup executable or manually updating the driver through Device Manager.
4. കമ്പ്യൂട്ടർ പുനരാരംഭിക്കുക: After successful driver installation, restart your computer to apply the changes.

അനുയോജ്യതയെക്കുറിച്ചുള്ള കുറിപ്പ്: This card is compatible with Windows XP, Vista, 7, 8, 8.1, Server 2003, and Server 2008. For Windows 10 and newer versions, drivers may be automatically detected, but manual installation using the provided link is recommended if issues occur.

5. Operating the Expansion Card

Once the Aideepen 2-Port PCI-E to USB 3.0 Expansion Card is installed and its drivers are configured, the two external USB 3.0 ports and the internal 20-pin header will be ready for use.

• ബന്ധിപ്പിക്കുന്ന ഉപകരണങ്ങൾ: Plug your USB 3.0 compatible devices (e.g., external hard drives, flash drives, cameras, printers) into the available USB 3.0 ports on the back of the card.
• ഹൈ-സ്പീഡ് ഡാറ്റ ട്രാൻസ്ഫർ: The USB 3.0 ports support a maximum data transfer speed of 5Gbps, significantly faster than USB 2.0, ideal for large file transfers and high-bandwidth devices.
• Internal Header: The 20-pin internal USB 3.0 header allows you to connect front panel USB 3.0 ports from your computer case, providing convenient access.
• ഹോട്ട്-സ്വാപ്പ് പിന്തുണ: The card supports hot-swapping, meaning you can connect and disconnect USB devices while the computer is running without needing to restart.

ചിത്രം 5.1: Examples of devices that can be connected to the USB 3.0 expansion card, including external hard drives, cameras, printers, and USB flash drives.

6. പരിപാലനം

The Aideepen 2-Port PCI-E to USB 3.0 Expansion Card requires minimal maintenance. Follow these guidelines to ensure its longevity:

• വൃത്തിയായി സൂക്ഷിക്കുക: Periodically open your computer case (after disconnecting power) and use compressed air to gently remove dust accumulation from the expansion card and surrounding components. Dust can impede airflow and lead to overheating.
• ശാരീരിക സമ്മർദ്ദം ഒഴിവാക്കുക: Ensure that no cables or other components are putting undue stress on the card or its connectors.
• പാരിസ്ഥിതിക സാഹചര്യങ്ങൾ: Operate your computer in a clean, dry environment with stable temperatures to prevent damage to electronic components.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your expansion card, refer to the following troubleshooting steps:

• Card not detected / No power:
  • Ensure the 4-pin Molex power connector is securely attached to the card and your PSU. This is a common cause of non-detection or unstable operation.
  • Verify the card is fully seated in the PCI-E slot.
  • Try installing the card in a different PCI-E slot if available.
• USB devices not working:
  • Confirm that the necessary drivers have been installed (refer to Section 4.2). Check Device Manager for any yellow exclamation marks next to USB controllers.
  • Test the USB device on another port or computer to ensure the device itself is functional.
  • Ensure the 4-pin Molex power connector is providing power to the card.
• കുറഞ്ഞ ട്രാൻസ്ഫർ വേഗത:
  • Ensure you are using USB 3.0 compatible devices and cables. USB 2.0 devices will operate at USB 2.0 speeds.
  • Verify that the drivers are correctly installed and up to date.
• "Device Not Migrated" error (Windows):
  • This error often indicates a driver issue. Reinstall the drivers from the provided Google Drive link (Section 4.2).
  • വിൻഡോസ് പൂർണ്ണമായും അപ്ഡേറ്റ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.

8 സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 8.1: Physical dimensions of the expansion card for reference.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the retailer where you purchased the Aideepen 2-Port PCI-E to USB 3.0 Expansion Card. You may also visit the official Aideepen store on Amazon for product updates and additional resources: Aideepen Amazon Store.