ഷ്നഗിൾ ബേബി ബാത്തിന്റെ ബീബ (മോഡൽ ഷ്നഗ്ഗ്ലെറ്റബ്സ്) ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

Thank you for choosing the BEABA by Shnuggle Baby Bath. This manual provides essential information for the safe and effective use of your baby bath. Designed for comfort and safety, this bath features an integrated bump support and a soft foam backrest, making bath time enjoyable for infants from 0 to 12 months.

ഫ്രണ്ട് view of the BEABA by Shnuggle Baby Bath in pink, showing the integrated bump support and soft backrest.

2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety warnings before using the product. Failure to follow these instructions could result in serious injury or death.

• WARNING: Never leave your child unattended in the bath, even for a moment. Drowning can occur quickly and in very shallow water.
• Always keep your child within arm's reach.
• Before placing your child in the bath, always check the water temperature to ensure it is safe and comfortable (approximately 37°C / 98.6°F).
• Ensure the bath is placed on a stable, flat, and non-slip surface.
• Do not overfill the bath. Always adhere to the maximum fill line indicated inside the bath.
• Keep all bath products (shampoo, soap, etc.) out of reach of your child.
• Inspect the bath for any damage or wear before each use. Discontinue use if any damage is found.
• This product is intended for bathing infants only. Do not use for any other purpose.

3. പാക്കേജ് ഉള്ളടക്കം

Your BEABA by Shnuggle Baby Bath package should contain the following:

• 1 x BEABA by Shnuggle Baby Bath with integrated bump support and soft foam backrest.
• 1 x Drain plug (pre-installed).

4. സജ്ജീകരണം

Setting up your baby bath is simple:

1. ഒരു ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a stable, flat, and safe surface for the bath. This can be inside a larger adult bathtub, on a sturdy bathroom floor, or in a large sink.
2. പരിശോധിക്കുക: Before first use, and before each subsequent use, inspect the bath for any signs of damage or manufacturing defects.
3. Ensure Drain Plug is Secure: Verify that the drain plug at the bottom of the bath is securely closed before filling with water.

The BEABA by Shnuggle Baby Bath can be placed on a stable surface for use.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps for a safe and comfortable bath time:

1. വെള്ളം നിറയ്ക്കുക: Begin by filling the bath with water. Always test the water temperature with your elbow or a bath thermometer to ensure it is between 36-38°C (97-100°F). Do not exceed the maximum fill line indicated inside the bath.
2. Place Your Baby: Gently place your baby into the bath, ensuring their bottom rests against the integrated bump support and their back is comfortably supported by the soft foam backrest. This design helps prevent your baby from sliding down.
3. Bathe Your Baby: While keeping one hand on your baby at all times, use your other hand to wash your baby. The upright position allows for easy access and interaction.
4. Remove Your Baby: Once bath time is complete, carefully lift your baby out of the bath. Wrap them immediately in a towel to keep them warm.
5. വെള്ളം ഒഴിക്കുക: Once your baby is safely out of the bath, open the drain plug at the bottom of the bath to empty the water.

A baby comfortably seated in the BEABA by Shnuggle Baby Bath, smiling during bath time.

Diagram illustrating the recommended water fill line for safe use.

6. വൃത്തിയാക്കലും പരിപാലനവും

Proper cleaning and maintenance will ensure the longevity and hygiene of your baby bath:

• ഓരോ ഉപയോഗത്തിനും ശേഷം: Empty the bath completely. Rinse thoroughly with clean water to remove any soap residue.
• വൃത്തിയാക്കൽ: Wipe the bath clean with a soft cloth and mild soap or a non-abrasive cleaner. Avoid harsh chemicals or abrasive sponges, as these can damage the surface.
• ഉണക്കൽ: Allow the bath to air dry completely after cleaning to prevent mold or mildew growth.
• സംഭരണം: Store the bath in a clean, dry place away from direct sunlight and extreme temperatures.

7. പ്രശ്‌നപരിഹാരം

നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങൾക്കുള്ള പരിഹാരങ്ങൾ ഇതാ:

8. ഉൽപ്പന്ന സവിശേഷതകൾ

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, product support, or to inquire about replacement parts, please refer to the official Béaba webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

നിർമ്മാതാവ്: ബീബ

Webസൈറ്റ്: www.beaba.com (Please note: This link is provided as a general reference and may not be specific to your region.)