എലിടെക് STC-1000 TH താപനില, ഈർപ്പം കൺട്രോളർ ഉപയോക്തൃ മാനുവൽ

1. ആമുഖവും അവസാനവുംview

The Elitech STC-1000 TH is a versatile temperature and humidity controller designed for precise environmental management. This non-WiFi model features a 2-in-1 sensor for both temperature and humidity, offering a wide control range suitable for various applications such as reptile habitats, home brewing, and freezers. Its pre-wired design ensures ease of use with a simple plug-and-play setup, eliminating complex wiring. The device includes dual relay outputs, allowing simultaneous control of temperature and humidity devices, and offers multi-functional settings including alarms, start delay, and calibration options. Built with safety in mind, it complies with CE, FCC, WEEE standards and features a fireproof ABS case.

Figure 1.1: Elitech STC-1000 TH Controller with its sensor and dual power outlets.

2 പ്രധാന സവിശേഷതകൾ

• വിശാലമായ നിയന്ത്രണ ശ്രേണി: Temperature & humidity 2 in 1 Sensor; Temperature control range 23℉～158℉, humidity control range 5%RH～99%RH. It starts cooling or heating; humidifying or dehumidifying according to configured parameters, which helps to keep a desired temperature/humidity anytime.
• വയറിംഗ് ഇല്ല: Its large LCD screen, simple 3-button, and pre-wired design making it easier for use with plug and play.
• ഡ്യുവൽ റിലേ ഔട്ട്പുട്ട്: Be able to connect two types of equipments at the same time, work1 for temperature controlling; and work 2 for humidity controlling.
• Multi-functional Setting: Its functions include high or low alarms, start delay, temperature or humidity calibration, Temperature unit ℃/℉ and continuous working time for humidity.
• സുരക്ഷിതവും വിശ്വസനീയവും: Comply with CE, FCC, WEEE standard and adopt fireproof ABS case for safety when in use. Flame Retardant UL94 V-0.

Figure 2.1: Visual representation of key features including large screen, buzzer alarm, compressor delay protection, power off memory, and real-time monitoring.

3. സജ്ജീകരണം

The Elitech STC-1000 TH is designed for straightforward setup, requiring no complex wiring. Simply plug in your heating/cooling and humidifying/dehumidifying devices into the designated outlets.

1. കൺട്രോളർ അൺപാക്ക് ചെയ്യുക: Carefully remove the controller, sensor, and power cables from the packaging.
2. Connect the Sensor: Plug the combined temperature and humidity sensor into the designated port on the controller.
3. സെൻസർ സ്ഥാപിക്കുക: Place the sensor in the environment where you wish to monitor and control temperature and humidity. Ensure it is not directly exposed to heat sources or moisture outlets for accurate readings.
4. ഉപകരണങ്ങൾ ബന്ധിപ്പിക്കുക: Plug your temperature control device (e.g., heat lamp, fan) into the 'WORK1' outlet and your humidity control device (e.g., humidifier, dehumidifier) into the 'WORK2' outlet.
5. പവർ ഓൺ: Plug the controller's main power cord into a standard 110V electrical outlet. The LCD screen will illuminate, displaying current temperature and humidity readings.
6. മൗണ്ടിംഗ് (ഓപ്ഷണൽ): The controller features a convenient hanging hole at the top for easy mounting on a wall or suitable surface using a nail or screw.

Figure 3.1: The controller's plug-and-play design simplifies installation.

Figure 3.2: The integrated hanging tab allows for easy and secure placement.

Figure 3.3: Product dimensions and cable lengths for planning your setup.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The STC-1000 TH features an intuitive interface for setting your desired temperature and humidity parameters. The large LCD screen provides clear readings and easy navigation.

Figure 4.1: The large LCD screen ensures easy readability of all parameters.

4.1 Setting Temperature and Humidity

1. ക്രമീകരണ മോഡ് നൽകുക: അമർത്തിപ്പിടിക്കുക സെറ്റ് button for 3 seconds until the setting icon (a small cloud with a wrench) appears on the display.

Figure 4.2: Hold the SET button for 3 seconds to enter setting mode.
2. Set Temperature (TS): ഉപയോഗിക്കുക Up or താഴേക്ക് arrows to navigate to the 'TS' parameter (Temperature Setpoint). Press സെറ്റ് once to select it. Use the arrows to adjust the desired temperature. Press സെറ്റ് again to confirm and move to the next parameter or exit.
3. Set Humidity (HS/HD): Similarly, navigate to 'HS' (Humidity Setpoint) for humidifying or 'HD' (Humidity Differential) for dehumidifying. Press സെറ്റ് once, adjust the value with the arrows, and press സെറ്റ് സ്ഥിരീകരിക്കാൻ വീണ്ടും.


Figure 4.3: Steps to set the humidity setpoint (HS).



Figure 4.4: Steps to set the humidity differential (HD).

4. ക്രമീകരണ മോഡിൽ നിന്ന് പുറത്തുകടക്കുക: The controller will automatically exit setting mode after a period of inactivity, or you can press and hold the സെറ്റ് button for 3 seconds to exit manually. The setting icon will disappear.

4.2 ഓട്ടോമാറ്റിക് പ്രവർത്തനം

Once parameters are set, the controller will automatically activate or deactivate the connected devices (via WORK1 and WORK2 outlets) to maintain the desired temperature and humidity levels. For example, if the temperature drops below your setpoint, the heating device connected to WORK1 will turn on until the setpoint is reached. The same logic applies to cooling, humidifying, and dehumidifying based on your configured settings.

Figure 4.5: The STC-1000 TH helps maintain optimal conditions for various projects.

5. പരിപാലനം

To ensure the longevity and accurate performance of your Elitech STC-1000 TH controller, follow these general maintenance guidelines:

• പതിവ് വൃത്തിയാക്കൽ: Wipe the controller and sensor with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
• സെൻസർ പരിചരണം: Keep the sensor clean and free from obstructions. Do not submerge the sensor in water or expose it to extreme physical impact.
• കേബിൾ പരിശോധന: Periodically check all cables for any signs of wear, cuts, or damage. Replace damaged cables immediately to prevent electrical hazards.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: Ensure the controller is used within its specified operating temperature and humidity ranges to prevent damage. Avoid placing it in direct sunlight or near strong electromagnetic fields.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Elitech STC-1000 TH controller, consider the following troubleshooting steps:

• ഡിസ്പ്ലേ/പവർ ഇല്ല:
  • Check if the power cord is securely plugged into a live electrical outlet.
  • പവർ സ്രോതസ്സ് സജീവമാണെന്ന് ഉറപ്പാക്കുക.
• കൃത്യമല്ലാത്ത വായനകൾ:
  • സെൻസർ വൃത്തിയുള്ളതാണെന്നും തടസ്സമില്ലെന്നും ഉറപ്പാക്കുക.
  • Verify the sensor is correctly positioned and not influenced by direct heat/cold sources or excessive moisture.
  • Perform a temperature or humidity calibration if you have a trusted reference thermometer/hygrometer. Refer to the detailed user manual for calibration procedures.
• Devices Not Activating/Deactivating:
  • Check if the devices are correctly plugged into the 'WORK1' (temperature) and 'WORK2' (humidity) outlets.
  • Confirm that the setpoints and differentials are configured correctly for your desired operation (e.g., heating vs. cooling, humidifying vs. dehumidifying).
  • Ensure the current temperature/humidity is outside the set range, triggering the controller.
• അലാറം ശബ്ദങ്ങൾ:
  • The alarm indicates that the temperature or humidity has exceeded or fallen below the set high/low alarm limits.
  • Adjust your setpoints or alarm limits as needed.

If these steps do not resolve the issue, please refer to the detailed user manual or contact Elitech customer support.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

Elitech is committed to providing high-quality products and excellent customer service. For any technical assistance or warranty inquiries, please utilize the following resources:

• സാങ്കേതിക സഹായം: Elitech offers 24/7 US Technician Support via Email and Phone. Contact information can be found on the official Elitech webസൈറ്റ് അല്ലെങ്കിൽ പൂർണ്ണ ഉപയോക്തൃ മാനുവലിൽ.
• ഉപയോക്തൃ മാനുവൽ: For detailed instructions, advanced settings, and comprehensive troubleshooting, please download the official user manual in PDF format: ഉപയോക്തൃ മാനുവൽ (PDF) ഡൗൺലോഡ് ചെയ്യുക

9. About Elitech

Elitech is an international enterprise originating from Silicon Valley in the United States. With subsidiaries in the United Kingdom, Brazil, Italy, Poland, and Russia, and a 100-acre production site in China, Elitech has a global presence. With over 27 years of experience in HVAC product manufacturing, Elitech produces a comprehensive line of HVAC tools and refrigeration solutions, leading the new generation of smart HVAC tools. Our mission is to combine intelligence and innovation with the refrigeration industry to simplify work processes.

Figure 9.1: Elitech Company Logo.