WORKPRO W114016 20-Inch Universal Lug Wrench Instruction Manual

1. ആമുഖം

The WORKPRO W114016 20-inch Universal Lug Wrench is designed for efficient removal and installation of lug nuts on vehicle wheels. Its cross-bar design provides enhanced leverage and torque compared to standard L-shaped wrenches. This tool features four different lug nut socket sizes to accommodate a wide range of vehicles, constructed from heat-treated, chrome-vanadium plated steel for durability and corrosion resistance. This manual provides essential information for safe and effective use of your lug wrench.

2 സുരക്ഷാ വിവരങ്ങൾ

• Always consult your vehicle's owner's manual for proper jack placement and tire changing instructions.
• Ensure the vehicle is on a flat, stable surface and the parking brake is engaged before attempting to loosen or tighten lug nuts.
• Use wheel chocks to prevent the vehicle from rolling.
• പരിക്ക് തടയാൻ കയ്യുറകൾ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ ധരിക്കുക.
• Do not use extension pipes or other unauthorized tools to increase leverage, as this can damage the lug wrench or lug nuts.
• Verify the correct socket size for your lug nuts to prevent rounding or damage.
• After changing a tire, re-check lug nut tightness after the first 50 miles of driving.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The WORKPRO W114016 Lug Wrench is a robust tool designed for tire maintenance. Its key features include:

• യൂണിവേഴ്സൽ ഫിറ്റ്: Equipped with four common lug nut sizes (11/16 inch, 3/4 inch, 13/16 inch, 7/8 inch SAE and 17 mm, 19 mm, 21 mm, 22 mm).
• Enhanced Torque: The 20-inch cross-bar design provides superior leverage for easier loosening and tightening of stubborn lug nuts.
• നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Made from heat-treated, chrome-vanadium plated steel for high strength and resistance to corrosion.
• ബഹുമുഖ ഉപയോഗം: Ideal for use when power or air tools are unavailable.

Figure 1: WORKPRO W114016 20-Inch Universal Lug Wrench. This image shows the full cross-shaped lug wrench, highlighting its four different socket ends.

ചിത്രം 2: ക്ലോസപ്പ് view of the lug wrench ends, clearly showing the various SAE and metric sizes stamped on each socket for easy identification.

4 സ്പെസിഫിക്കേഷനുകൾ

5. സജ്ജീകരണം

The WORKPRO W114016 Lug Wrench is ready for immediate use upon unboxing. No assembly is required.

1. Identify Lug Nut Size: Determine the correct size of your vehicle's lug nuts. The lug wrench provides four different sizes on its ends.
2. ശരിയായ സോക്കറ്റ് തിരഞ്ഞെടുക്കുക: Choose the socket on the lug wrench that fits snugly over your vehicle's lug nuts. A proper fit is crucial to prevent rounding the lug nuts.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1. Loosening Lug Nuts

1. വാഹനം തയ്യാറാക്കുക: Park the vehicle on a flat, stable surface. Engage the parking brake. If changing a flat tire, place wheel chocks on the opposite wheel.
2. Access Lug Nuts: If applicable, remove the wheel cover or hubcap to expose the lug nuts.
3. പൊസിഷൻ റെഞ്ച്: Place the correct size socket of the lug wrench onto a lug nut. Ensure it is fully seated.
4. ബലം പ്രയോഗിക്കുക: With both hands, apply steady, firm pressure in a counter-clockwise direction to loosen the lug nut. Use the cross-bar design to maximize leverage.
5. Loosen All Nuts: Loosen all lug nuts on the wheel by about half a turn. Do not remove them completely at this stage.
6. Jack Up Vehicle: Once all lug nuts are loosened, use a jack to lift the vehicle until the tire is clear of the ground.
7. Remove Lug Nuts: Fully remove the loosened lug nuts and place them in a safe location.
8. Remove Wheel: Carefully remove the wheel from the hub.

6.2. Tightening Lug Nuts

1. Mount Wheel: ബോൾട്ട് ദ്വാരങ്ങൾ വിന്യസിച്ചുകൊണ്ട് ചക്രം ഹബ്ബിൽ വയ്ക്കുക.
2. Hand-Tighten Nuts: Thread the lug nuts onto the wheel studs by hand. Ensure they are not cross-threaded.
3. Snug Nuts: Using the lug wrench, tighten the lug nuts until they are snug. Tighten them in a star pattern (e.g., skip every other nut) to ensure even seating of the wheel.
4. താഴ്ന്ന വാഹനം: Lower the vehicle until the tire just touches the ground, but the full weight is not yet on the wheel.
5. അന്തിമ മുറുക്കൽ: Continue tightening the lug nuts in a star pattern until they are fully secure. Refer to your vehicle's owner's manual for the recommended torque specifications.
6. Fully Lower Vehicle: Completely lower the vehicle and remove the jack and wheel chocks.
7. കവർ മാറ്റിസ്ഥാപിക്കുക: Reinstall the wheel cover or hubcap if applicable.

7. പരിപാലനം

• വൃത്തിയാക്കൽ: Wipe the lug wrench clean after each use to remove dirt, grease, or moisture.
• സംഭരണം: Store the lug wrench in a dry place to prevent rust and corrosion.
• പരിശോധന: Periodically inspect the lug wrench for any signs of damage, bending, or wear. Replace if damaged.

8. പ്രശ്‌നപരിഹാരം

9. ബോക്സിൽ എന്താണുള്ളത്?

• 1 x WORKPRO W114016 20-Inch Universal Lug Wrench

10. വാറണ്ടിയും പിന്തുണയും

For warranty information or product support, please refer to the documentation included with your purchase or contact WORKPRO customer service directly. Keep your proof of purchase for any warranty claims.

Manufacturer: Prime-Line Products