ഫുജിറ്റ്സു ഇൻസ്റ്റലേഷൻ KIT DAITSU ACCDWK2 ഉപയോക്തൃ മാനുവൽ

ആമുഖം

This manual provides essential information for the proper installation, usage, and maintenance of the Fujitsu Installation KIT DAITSU ACCDWK2. This kit is designed as an accessory for portable air conditioning units, specifically for adapting a window opening to accommodate the exhaust hose, ensuring efficient operation and proper sealing.

Please read this manual thoroughly before beginning installation to ensure safe and correct setup.

സുരക്ഷാ വിവരങ്ങൾ

• ഇൻസ്റ്റാളേഷൻ സമയത്ത് എല്ലായ്പ്പോഴും കയ്യുറകൾ, കണ്ണ് സംരക്ഷണം തുടങ്ങിയ ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ധരിക്കുക.
• Ensure the installation area is clear of obstructions and stable.
• Do not modify the components of the kit unless explicitly instructed. Unauthorized modifications may compromise performance or safety.
• Keep all components out of reach of children and pets.
• If any part is damaged or missing, do not proceed with installation. Contact your retailer or manufacturer for replacement parts.

പാക്കേജ് ഉള്ളടക്കം

Verify that all components listed below are present and undamaged before proceeding with installation. Refer to the image below for visual identification of parts.

ചിത്രം 1: കഴിഞ്ഞുview of all components included in the Fujitsu Installation KIT DAITSU ACCDWK2. The kit includes various white plastic panels, a black flexible hose, round brown seals, a white grille, and small fasteners, all designed for a portable air conditioner window setup.

• Adjustable Window Panels: Typically two or more white plastic panels that slide or connect to fit various window widths. One panel usually has a circular cutout for the exhaust hose adapter.
• Exhaust Hose Adapter: A connector piece, often round, that fits into the window panel cutout and allows the air conditioner's exhaust hose to attach.
• Sealing Strips/Gaskets: Black flexible strips or round brown seals (as seen in the image) to provide an airtight seal around the window panels and the window frame.
• Fasteners/Screws: Small hardware for securing panels or other components.
• Grille/Vent: A white rectangular piece with slats, possibly for an intake or exhaust opening, or to cover a gap.
• Additional Brackets/Covers: Smaller white rectangular pieces that may serve as support or cover plates.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This section outlines the general steps for installing the window kit for a portable air conditioner. Specific steps may vary slightly depending on your window type and air conditioner model.

1. നിങ്ങളുടെ വിൻഡോ അളക്കുക: Measure the height or width of your window opening (depending on whether it's a vertical or horizontal sliding window).
2. Assemble Window Panels:
   • Connect the adjustable window panels (the white rectangular pieces) to match the measured dimension of your window opening. Slide them together until they fit snugly.
   • Ensure the panel with the circular cutout is positioned correctly to allow the exhaust hose to extend outwards.
3. Install Sealing Strips:
   • Apply the flexible black sealing strip and the round brown seals (gaskets) along the edges of the window panels and the window frame where they will make contact. This helps create an airtight seal to prevent air leakage.
   • Press firmly to ensure good adhesion.
4. Place Panels in Window:
   • Carefully place the assembled window panels into the window opening.
   • Close the window sash against the panels to hold them securely in place.
5. Secure Panels (Optional): If provided, use the small screws or fasteners to secure the panels to the window frame or to each other for added stability. Exercise caution to avoid damaging the window frame.
6. എക്‌സ്‌ഹോസ്റ്റ് ഹോസ് ഘടിപ്പിക്കുക:
   • Connect the exhaust hose adapter (if separate) to the circular cutout in the window panel.
   • Attach the portable air conditioner's exhaust hose to the adapter, ensuring a tight fit to prevent hot air from re-entering the room.
7. അന്തിമ പരിശോധനകൾ: Inspect the installation for any gaps or loose connections. Ensure the window is securely closed against the panels and that the exhaust hose is properly routed.

ഉപയോഗ പരിഗണനകൾ

Once the installation kit is properly set up, consider the following for optimal performance of your portable air conditioner:

• എയർടൈറ്റ് സീൽ: Regularly check the seals around the window panels and the exhaust hose connection. Any gaps can reduce the efficiency of your air conditioner by allowing outside air to enter.
• ഹോസ് റൂട്ടിംഗ്: Ensure the exhaust hose is as straight and short as possible to minimize heat loss and maximize airflow. Avoid sharp bends or kinks.
• Window Security: While the kit helps secure the window, consider additional window locks if security is a concern, especially if the window cannot be fully locked with the kit installed.

മെയിൻ്റനൻസ്

Proper maintenance of your installation kit will extend its lifespan and ensure continued efficiency.

• വൃത്തിയാക്കൽ: Periodically wipe down the plastic panels with a soft, damp cloth and mild detergent. Avoid abrasive cleaners that could scratch the surface.
• മുദ്ര പരിശോധന: Inspect the sealing strips and gaskets for wear, cracks, or deterioration. Replace them if they no longer provide an effective seal.
• സംഭരണം: When not in use, disassemble the kit and store all components in a clean, dry place away from direct sunlight and extreme temperatures to prevent material degradation.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your installation kit, refer to the following common problems and solutions:

സ്പെസിഫിക്കേഷനുകൾ

The following specifications are for the Fujitsu Installation KIT DAITSU ACCDWK2:

• മോഡൽ നമ്പർ: ACCDWK2
• ബ്രാൻഡ്: Fujitsu (DAITSU is the manufacturer)
• നിറം: വെള്ള
• ഇനത്തിൻ്റെ ഭാരം: ഏകദേശം 2.2 പൗണ്ട് (1 കിലോഗ്രാം)
• ഉൽപ്പന്ന അളവുകൾ: Approximately 2.76 x 2.76 x 4.33 inches (packaged/collapsed)
• മെറ്റീരിയൽ: Plastic (panels), Rubber/Foam (seals)
• ഉദ്ദേശിച്ച ഉപയോഗം: Accessory for portable air conditioning units, specifically for window exhaust hose installation.

വാറൻ്റി വിവരങ്ങൾ

Warranty terms and conditions for the Fujitsu Installation KIT DAITSU ACCDWK2 are provided by the manufacturer, DAITSU, or the retailer at the time of purchase. Please refer to your purchase documentation or contact the seller directly for specific warranty details, coverage period, and claims process.

പിന്തുണയും കോൺടാക്‌റ്റും

For technical assistance, missing parts, or further inquiries regarding the Fujitsu Installation KIT DAITSU ACCDWK2, please contact the manufacturer or your point of purchase. Keep your purchase receipt and model number (ACCDWK2) readily available when seeking support.

Manufacturer: DAITSU

പൊതുവായ അന്വേഷണങ്ങൾക്ക്, നിങ്ങൾക്ക് സന്ദർശിക്കാവുന്നതാണ് Fujitsu brand page on Amazon.